Characterization of ZnS:Cu, Br electroluminescent phosphor prepared by new route

Synthesis of electroluminescent ZnS:Cu, Br phosphor by a number of routes has been presented along with their brightness-voltage, brightness-frequency, brightness-waveform and spectral energy distribution studies. The sample fired in N₂ atmosphere with aluminum and bromine shows predominantly green emission with a peak around 530 nm whereas the sample prepared under H₂S and HBr shows the broadest emission spectrum with multiple peaks. These peaks may arise out of different possible bands of copper, self-activated luminescence of ZnS and association of copper with some of the donor levels formed because of the higher reactivity of HBr. All the samples have been found to obey the relation B=B₀ exp.(−b/V^0.5) which has been discussed using bipolar tunnel emission model. The frequency variation of brightness is linear. Samples containing bromine show multiple secondary peaks indicating that bromine helps in formation of multiple shallow traps.     

Cost-Benefit Analysis of Residential Energy-Efficiency Upgrades in Phoenix, Arizona

With worldwide energy consumption rising, there is a need to reduce energy use of the housing stock. While this general idea is well-known, there is an overwhelming amount of product data and manufacturers claims through which the homebuilder or designer must sort to make informed selections of energy-efficient upgrades. The main objective of this research was to identify cost effective–energy efficient upgrades from a group of 16 commonly available choices, and rank them according to the most beneficial for the least cost. This study was conducted in Phoenix, Arizona, and included a sample of 30 production-style homes typical of the Phoenix metropolitan area. Energy-simulation software was used to perform energy evaluations and derive the benefits of each upgrade. The cost of each upgrade was obtained from a database of national average costs and from a local context. Differences in the selection of beneficial upgrades vary dramatically with the source of the cost information. This research provides a generic methodology that can be used by builders and designers to select appropriate energy-efficient upgrades for a given geographic area that will provide high operating benefits relative to the amount of capital investment.     

Cornea stress test--evaluation of corneal endothelial function in vivo by contact lens induced stress

Changes in the NHS have supported the idea of targeting health services to those in greatest need. This has meant that health visitors are increasingly having to identify 'vulnerable' families in need of increased health visiting intervention. This paper reports on a qualitative study undertaken in order to explore the ways in which health visitors plan and organize their work in relation to the concept of vulnerability. Focus groups and semi-structured interviews were carried out with health visitors from two separate geographical areas, one an inner city area and the other suburban, in order to explore the criteria by which health visitors define vulnerability and decide to increase their levels of intervention to particular families. It was found that vulnerability was extremely difficult to define but that the health visitors used criteria which were appropriate to the particular localities in which they worked to identify vulnerable families and to increase their levels of intervention to those families. Health visitors were targeting their services within a framework of a basic minimum service to all and were assessing the health needs of individuals or families rather than planning their work on the basis of community or practice profiles.     

Thermal stability and high-temperature wear of Ti–TiN and TiN–CrN nanomultilayer coatings under self-mated conditions

Ti–TiN and TiN–CrN nanomultilayers were thermally stable retaining uniform and sharp layer interfaces up to 24 h at 773 K, without any oxidation or phase transformation accompanying each individual layer. Decreasing the multilayer spacing resulted in an increase in the hardness in both cases. The coating hardness was found to be independent of the substrate type, when applied on HS718, Ti64 and HCHCr substrates. In scratch testing, the multilayers displayed a better resistance to the onset of failure, as compared to the monolayer TiN. The substrate plasticity played an important role in determining the coating failure mode. Self-mated wear tests revealed the CrN–TiN system to exhibit the best wear behaviour, both at room temperature and at 773 K. The Ti–TiN coatings are more accommodative with all three substrates, as compared to TiN–CrN and TiN.     

Towards an effective integration of cellular users to the structured Peer-to-Peer network

Integration of cellular users into the peer-to-peer (P2P) network is still in limbo due to limitations caused by heterogeneity, mobility and time-varying capacities of the wireless channel. If traditional Chord is employed to include users from the cellular networks, users under the same base station scatter in logical topology randomly. In this paper, we present a novel cellular Chord (C-Chord) P2P system that integrates the cellular users into the well-established structured P2P network in a topology-aware fashion. C-Chord offers the cellular users a choice of downloading contents either from the Internet peers at a faster rate or from other cellular users from the same base station avoiding the Internet data penalty. We also incorporate the peer selection module based on stable marriage problem that chooses the appropriate candidate from the discovered potential senders. We conduct extensive simulations to evaluate the performance of the proposed C-Chord P2P system and the peer selection module. Simulation results show that the path-length per lookup query is smaller than that of the traditional Chord system. Overhead due to renewal of routing information is also smaller for the cellular users in the C-Chord system. We also measure the throughput at the cellular receivers to analyze the effects of selecting peers either from same base station or from outside the Internet gateway. Throughput also increases dramatically due to an intelligent selection of peers among the potential senders.     

An intelligent hybrid approach for hepatitis disease diagnosis: Combining enhanced k‐means clustering and improved ensemble learning

In real world, the automatic detection of liver disease is a challenging problem among medical practitioners. The intent of this work is to propose an intelligent hybrid approach for the diagnosis of hepatitis disease. The diagnosis is performed with the combination of k‐means clustering and improved ensemble‐driven learning. To avoid clinical experience and to reduce the evaluation time, ensemble learning is deployed, which constructs a set of hypotheses by using multiple learners to solve a liver disease problem. The performance analysis of the proposed integrated hybrid system is compared in terms of accuracy, true positive rate, precision, f‐measure, kappa statistic, mean absolute error, and root mean squared error. Simulation results showed that the enhanced k‐means clustering and improved ensemble learning with enhanced adaptive boosting, bagged decision tree, and J48 decision tree‐based intelligent hybrid approach achieved better prediction outcomes than other existing individual and integrated methods.     

Chitosan-based magnetic molecularly imprinted polymer: synthesis and application in selective recognition of tricyclazole from rice and water samples

A tricyclazole selective chitosan/Fe₃O₄ magnetic molecularly imprinted polymer (MMIP) was synthesized using non-covalent binding polymerization involving methacrylic acid (MAA) as functional monomer, divinylbenzene (DVB-80) as crosslinker, 2,2'-azobisisobutyronitrile as initiator, acetonitrile/toluene (75:25, v/v) as porogenic solvent and tricyclazole as template. Surface morphology and magnetic characterization of the prepared imprinted and non-imprinted polymers were done using scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectrometry and vibrating sample magnetometry, respectively. The adsorption kinetic data fitted best in pseudo-second-order model. The adsorption equilibrium was achieved in 30 min and the maximum binding capacity was 4579.9 µg/g. The Freundlich isotherm model was found suitable for explaining the binding isotherm data (R² > 0.99). Negative values of thermodynamic parameters ∆G (Gibb’s free energy), ∆H (enthalpy), and ∆S (entropy) revealed exothermic and spontaneous nature of adsorption processes. It also revealed decreased randomness at the solid–liquid interface during sorption. The scatchard plot analysis suggested heterogeneity of binding sites on MMIPs. The molecular recognition selectivity of MMIPs towards tricyclazole was much higher, as compared to its structural analogues, tebuconazole (α = 28.58) and hexaconazole (α = 37.16). The MMIPs were successfully applied to separate and enrich tricyclazole from fortified samples of rice and water, with a recovery percentage of 89.4% and 90.9%, respectively. These reusable imprinted polymers possessing high selectivity and specificity can be utilized as an adsorbent for solid-phase extraction in sample preparation for tricyclazole residue analysis in complex environmental matrices.

     

Design of Dual-Gate P-type IMOS Based Industrial Purpose Pressure Sensor

Silicon - In this treatise, we have proposed a Single Material Gate–Dual Gate Impact Ionization Metal Oxide Semiconductor (SMG DG-IMOS) based Pressure Sensor. The pressure sensor has the most...     

Kinetics of droplet growth in liquid—liquid phase separation of polymer—diluent systems: experimental results

Liquid—liquid thermally induced phase separation of the polymer—diluent system isotactic poly(propylene)—diphenyl ether was studied under an optical microscope. It was found that as the system phase separated, droplets of a diluent-rich phase formed within a polymer-rich matrix. These droplets grew in size and decreased in number by a process known as coarsening. The scaling exponent relating droplet diameter and time was determined. The scaling exponent was found to be a strong function of the droplet phase volume fraction, and this strong dependence on volume fraction was relatively insensitive to temperature. The influence of the ratio of interfacial tension between the phases and the viscosity of the matrix phase was less significant on the growth rate of the droplets.