动态硫化技术及其发展

结合动态硫化技术的发展史,重点评述了国外80年代该技术的发展及其特点,揭示了TPV性能及特征与制备条件的关系;简介我国开发研究TPV的概况,并提出了看法。     

国产耐火材料在欧洲3 300t/d生产线上的整体配套

Fushe-Kruje水泥厂项目位于距阿尔巴尼亚首都地拉那市28公里处，是由黎巴嫩SEAMENT集团投资兴建的．是迄今阿尔巴尼亚最大的外商投资项目，设计能力为3300t/d新型干法水泥熟料生产线，是全套生产线由我公司设计、制造成套、施工、安装、调试及试生产的总承包项目。     

VOID FRACTION PROFILES IN PLANE-POISEUILLE FLOW OF VISCOELASTIC FOAMS

This investigation focuses on slow, isothermal, two-phase flow of gas bubble suspensions in Separan solutions, prepared with the help of a sodium borohydride blowing agent at room temperature. The total residence time in these experiments is much smaller than characteristic times for growth or rise of bubbles. The variation of bubble volume fraction across a narrow gap between two planes, is recorded at two locations along the flow direction. This is done with a Cesium gamma-radiation source focused on a region of area.012 cm² in the flow plane, and a Sodium iodide detector across the channel yielding a resolution of.01 over the range of void fractions investigated from.02 to.08. This measurement allows us to identify conditions under which the two-phase flow may be described by a two fluid model with a uniform bubbly core and a bubble free wall layer. With this two phase flow structure, a relative viscosity equation for the suspension is used to compute an apparent viscosity. Such calculations indicate that the observed reduction in apparent viscosity for the two phase flow may be attributed to a bubbly core which is more shear thinning than the medium. The additional shear thinning factor for the suspension is related to the elasticity of the medium.     

Catalytic properties of aluminated sepiolite in ethanol conversion

The aluminated sepiolite, obtained by alkaline treatment with KAlO₂, as well as the silver-exchanged aluminated sepiolite were tested in ethanol conversion. The reactions were performed at 280°C and with 50 Torr of ethanol in He. After the alumination through KA1O₂, ethanol dehydrogenation and ethanol dehydration resulted from the Lewis acidity. The dispersion of silver led to a bifunctional catalytic system and the overall catalytic activity and the selectivity towards the acetaldehyde production increased. As a result of the Prins reaction, a significant yield in butadiene was observed.     

On the membrane phospholipids and their acyl group profiles of adrenal gland

The phospholipid composition and their acyl group profiles from subcellular fractions of guinea pig adrenal gland and the same fractions from the cortex and medulla of the bovine gland were compared. The phospholipids of guinea pig adrenal were enriched in diacyl-glycerophosphocholines (GPC) which comprised over 50% of the total phospholipids, but the proportions of ethanolamine and choline plasmalogens, sphingomyelin and diacyl-glycerophosphoserine (GPS) were lower in guinea pig adrenals as compared to the bovine adrenals. In the bovine adrenal, sphingomyelin and diacyl-GPS were enriched in the medulla, whereas diacyl-glycerophosphoinositol (GPI) were enriched in the cortex. Although lysolecithin was present (up to 4.5%) in the bovine adrenal, only trace amounts of this lipid were detected in the guinea pig adrenal. Characteristic acyl group profiles were found associated with each type of the phosphoglycerides in adrenal membranes. However, acyl group profiles of the phosphoglycerides were not greatly different either between the bovine and guinea pig adrenal or with respect to the type of subcellular membranes isolated. Diacyl-GPC were enriched in 16∶0 and 18∶1, but also contained considerable amounts of 18∶0, 18∶2 and 20∶4. Diacyl-GPE were enriched in 18∶0, 18∶1 and 20∶4, while diacyl-GPI, diacyl-GPS, as well as alkenylacyl-GPE, were enriched in 20∶4. The lysolecithin from bovine adrenal membranes contained mainly 16∶0, 18∶0 and 18∶1 with only trace amounts of the polyunsaturated fatty acids. Other polyunsaturated fatty acids, such as 22∶4 and 22∶6, are apparently not prominent in the phosphoglycerides from either the bovine or the guinea pig adrenal gland.     

Preparation,characterization, and adsorption properties for metal ions of a novel chelating resin containing sulfoxide and diethylene glycol

A novel chelating resin containing sulfoxide and diethylene glycol, poly{4‐vinylbenzyl‐[2‐2‐(hydroxyethyl)ethoxyl]sulfoxide} (PVESO) was synthesized using chloromethylated polystyrene (PS‐Cl) as material. Its structure was characterized by elemental analysis, infrared spectra, and scanning electron microscopy (SEM). The adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, and Pb²⁺ at various pH values were determined. The maximum adsorption capacities for Hg²⁺ and Ag⁺ were 1.56 and 0.75 mmol g^?1 respectively. The resin had high selectivity for Hg²⁺ and Ag⁺ over the pH range 1.0–7.0. The adsorption capacities for Hg²⁺ and Ag⁺ under competitive condition were also determined by batch experiment method. In addition, the adsorption kinetics of the resin towards Hg²⁺ at different temperatures was also investigated. The results showed that the adsorption rate was governed by film diffusion at 20°C and 25°C, by particle diffusion at 30°C and 35°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6054–6059, 2006     

Morphology and properties of blends of polypropylene with ethylene-propylene rubber

Great attention has been paid to the toughening of isotactic polypropylene (PP) in recent years in order to make full use of this plastic. This paper presents the results of our study on the compatibility of PP with ethylene-propylene-diene rubber (EPT), polybutadiene rubber (PB) or styrene-butadiene rubber (SBR) through characterization of the blends' morphology, and on. the morphology and properties of binary blends of PP with EPT (EPT/PP) and ternary blends of PP, EPT, and polyethylene (PE) (EPT/PE/PP). Morphological structure of solution blends and the great improvement in low-temperature impact strength and other properties of the mechanical blends have shown the difference among EPT, PB, and SBR in compatibility with PP, the effectiveness of using EPT as PP's toughening agent, and the effect of EPT on EPT/PP blend as both toughening agent and compatibilizer. Addition of EPT to EPT/PP made interesting changes in morphology but no effect on properties was observed.     

金属间化合物的研究现状及其最新发展趋势

主要介绍了金属间化合物的概念、发展历程、研究现状及几种常用金属间化合物的发展状况，并提出了该类材料的最新发展趋势。     

THERMODYNAMIC PERFORMANCE PREDICTION FOR NON-CFC MIXTURES

The ideal thermodynamic performances of a variety of non-CFC refrigerants and their mixtures were calculated by using the Patel-Teja equation of state. The results indicated that the preferable non-CFC refrigerant mixtures could be HCFC-I24 +HFC-152a, HFC-152a + HFC-134, dimethyl ether + HCFC-22, and dimethyl ether + HCFC-124 for air-conditioning systems, and binary mixtures of HCFC-22 + HFC-125, and HCFC-22 + HFC-143a for low-temperature applications. Those potential non-CFC mixtures were suggested for further investigations.