Effect of bulk flow pulsations on film cooling with compound angle holes

Experiments are conducted to investigate the effects of bulk flow pulsations on film cooling with compound angle holes. A row of five film cooling holes is considered with orientation angles of 0°, 30°, 60°, and 90° at a fixed inclination angle of 35°. Static pressure pulsations are produced by an array of six rotating shutter blades, which extend across the span of the exit of the wind tunnel test section. The pulsation frequency is fixed at 36 Hz, but changes in the time-averaged blowing ratios of 0.5, 1.0 and 2.0 produce three different coolant Strouhal numbers, 3.6, 1.8 and 0.9, respectively. Detailed film cooled boundary layer temperature distributions are measured by a cold wire and the adiabatic film cooling effectiveness by thermochromic liquid crystal (TLC). The boundary layer temperature surveys show that pulsations induce large disruptions to the boundary layer temperature distribution and the film coverage. As the orientation angle increases, the injectant concentration spreads further into the spanwise direction because of pulsations than the steady case. With pulsations the adiabatic film cooling effectiveness value decreases regardless of the orientation angle. The amount of reduction, however, depends on the orientation angle in such a way that the larger the orientation angle is, the smaller the reduction is.     

Radiation-laminar free convection in a square duct with specular reflection by absorbing-emitting medium

The purpose of this work is to study the effects of specularly reflecting wall under the combined radiative and laminar free convective heat transfer in an infinite square duct. An absorbing and emitting gray medium is enclosed by the opaque and diffusely emitting walls. The walls may reflect diffusely or specularly. Boussinesq approximation is used for the buoyancy term. The radiative heat transfer is evaluated using the direct discrete ordinates method. The parameters under considerations are Rayleigh number, conduction to radiation parameter, optical thickness, wall emissivity and reflection mode. The differences caused by the reflection mode on the stream line, and temperature distribution and wall heat fluxes are studied. Some differences are observed for the categories mentioned above if the order of the conduction to radiation parameter is less than order of 10^-3 for the range of Rayleigh number studied. The differences at the side wall heat flux distributions are observed as long as the medium is optically thin. As the top wall emissivity decreases, the differences between these two modes are increased. As the optical thickness decreases at the fixed wall emissivity, the differences also increase. The difference of the streamlines or the temperature contours is not as distinct as the side wall heat flux distributions. The specular reflection may alter the fluid motion.     

Ubiquitous Information Services with JAIN Platform

To provide responsive information services in a ubiquitous computing environment, service software and system development are indispensable. A component-based ubiquitous information system with a JAIN (Java APIs for Integrated Networks) platform to achieve seamless transmissions and reach-everywhere communications was designed in our research. In this development, numerous ubiquitous service modules were identified: location management, roaming, mobile IP and WAP networking. These component-based network modules were constructed using a component composition language with component specification and interface definition, running on top of a distributed service architecture using a JAIN platform to distribute the ubiquitous information services to mobile users. Two applications, Wireless-Application-Protocol (WAP) Mail and Video-on-Demand (VoD) services, show that the JAIN-like platform with the developed networking components effectively fills the gap for application developers between mobile appliances and various kinds of ubiquitous information services.     

Improved method for the preparation of TiN-coated WC-Co-based samples for cross-sectional AEM investigation.

An improved method for the preparation of cross-sectional thin foils of coated WC-Co samples for studies by analytical electron microscopy is described. A braze alloy is used to join the sections of the sample together and the resulting sample is stable during subsequent grinding, dimpling, and milling operations. Cross-sectional micrographs provide examples of the efficacy of this method. No microstructural alteration associated with the brazing operation was observed.     

Influence of nitrate, ascorbic acid, and nitrate reductase microorganisms on N-nitrosamine formation during Korean-style soysauce fermentation.

Traditional Korean soysauce samples were collected from households in Chinju, Gyeongnam, Korea and analysed for volatile N-nitrosamines. Five of 24 samples contained NDMA (range = 1.6-10.4 micrograms/l) which was the only volatile N-nitroso compound found. Soysauce made from well water contained NDMA more often (4 of 6 samples) than soysauce made from tap water (1 of 18). This suggests that the water source is a determinate in the NDMA content of soysauce, probably due to a higher nitrate content of well water. The source of salt used did not clearly influence NDMA content. Soysauce was prepared in the laboratory using traditional methods but with 0 to 400 mg/l nitrate and in some cases made 6.5 to 65 mM in ascorbic acid and fermented for 120 days. The NDMA content of the samples was positively correlated with increasing nitrate concentration. Nitrate at 400 mg/l resulted in an NDMA content of 203 micrograms/l. Ascorbic acid substantially inhibited NDMA formation. All samples contained large numbers of nitrate reductase-containing organisms (greater than 1 x 10(7) CFU/ml).     

Computer modeling of the continuous annealing furnace

A computer program to calculate the strip temperature heated in the continuous annealing furnace was developed, using the zone method for radiative heat transfer analysis with the measured gas temperature in the furnace. Using theF _E Operator, the present study considered the effects of soot and transient species, in addition to the H₂O−CO₂ gas mixture on the gas radiative heat transfer. The predicted strip temperature distribution forF _E=1.05 represented well the measured data. The maximum difference in the heat flux transfered to the strip from the combustion gas forF _E=1.0 (without soot and transient species gas radiation) and 1.05 (with soot and transient species gas radiation) was about 15%. The present study also investigated the effects of line speed and thickness variations on the strip temperature, establishing the bases for the on-line computer model.     

Pseudorandomness of Basic Structures in the Block Cipher KASUMI

The notion of pseudorandomness is the theoretical foundation on which to consider the soundness of a basic structure used in some block ciphers. We examine the pseudorandomness of the block cipher KASUMI, which will be used in the next‐generation cellular phones. First, we prove that the four‐round unbalanced MISTY‐type transformation is pseudorandom in order to illustrate the pseudorandomness of the inside round function FI of KASUMI under an adaptive distinguisher model. Second, we show that the three‐round KASUMI‐like structure is not pseudorandom but the four‐round KASUMI‐like structure is pseudorandom under a non‐adaptive distinguisher model.     

Three-temperature modeling of carrier-phonon interactions in thin GaAs film structures irradiated by picosecond pulse lasers

This article investigates numerically the carrier-phonon interactions in thin gallium arsenide (GaAs) film structures irradiated by subpicosecond laser pulses to figure out the role of several recombination processes on the energy transport during laser pulses and to examine the effects of laser fluences and pulses on non-equilibrium energy transfer characteristics in thin film structures. The self-consistent hydrodynamic equations derived from the Boltzmann transport equations are established for carriers and two different types of phonons, i.e., acoustic phonons and longitudinal optical (LO) phonons. From the results, it is found that the two-peak structure of carrier temperatures depends mainly on the pulse durations, laser fluences, and nonradiative recombination processes, two different phonons are in nonequilibrium state within such lagging times, and this lagging effect can be neglected for longer pulses. Finally, at the initial stage of laser irradiation, SRH recombination rates increases sufficiently because the abrupt increase in carrier number density no longer permits Auger recombination to be activated. For thin GaAs film structures, it is thus seen that Auger recombination is negligible even at high temperature during laser irradiation.     

Fiberoptic intrinsic fluorescence for in-situ cure monitoring of amine cured epoxy and composites

The cure reactions of epoxy-diamine and its composites are monitored in-situ using the intrinsic fluorescence of the aromatic diamine, diaminodiphenyl sulfone (DDS). With a fiberoptic fluorimeter, in-situ cure monitoring was performed via a single fiber, distal-end probe, in neat epoxy as well as in commercial grade prepregs containing graphite fibers and DDS curing agent. The prepregs were investigated during multiply lamination in an oven. The fluorescence excitation spectra were obtained by emitting at 420 nm with a scan range of 320 to 400 nm, and the DDS peak position was determined as a function of cure time and temperature. The DDS spectra show a progressive red shift up to 24 nm when the primary amine is reacted with epoxide to become the secondary and the tertiary amines. The spectral shift of the DDS is also correlated with the extent of epoxide reaction determined by the Fourier transform infrared (FTIR) spectroscopy. Both data exhibit a linear relation, consistent with the behavior of the DDS peak shift, which increases linearly with the amine reaction. The excitation spectra also show a temperature dependency such that the amount of red shift increases with the measurement temperature in a manner that can be described by an exponential function. The temperature effects also depend on the state of cure in the sample. The temperature correction can be made by the application of an empirically developed equation. Thus, a direct comparison can be made among the on-line data obtained under varying conditions of cure, by reducing the spectral data to any reference temperature. This intrinsic fluorescence technique is much simpler than the previously reported extrinsic fluorophore technique, which requires the addition of an extrinsic fluorophore and an internal dye, and can be applied to any commercial prepregs containing DDS, thus making it a very powerful and widely applicable monitoring tool for composite processing.     

Error Concealment Based on Semantic Prioritization with Hardware‐Based Face Tracking

With video compression standards such as MPEG‐4, a transmission error happens in a video‐packet basis, rather than in a macroblock basis. In this context, we propose a semantic error prioritization method that determines the size of a video packet based on the importance of its contents. A video packet length is made to be short for an important area such as a facial area in order to reduce the possibility of error accumulation. To facilitate the semantic error prioritization, an efficient hardware algorithm for face tracking is proposed. The increase of hardware complexity is minimal because a motion estimation engine is efficiently re‐used for face tracking. Experimental results demonstrate that the facial area is well protected with the proposed scheme.