Experimental analysis of bubble mode in a plate-type absorber

An experimental analysis of ammonia-water absorption was performed in a plate-type absorber. The flow of water and ammonia gas was performed in the bubble mode. The experiments were made to examine the effects of solution flow rate and gas flow rate on the performance of the absorber. It was found that the increase of solution flow rate rarely affected the mass transfer, but improved the heat transfer. As the gas flow rate increased, slugging occurred in the bubble mode and influenced the thermal boundary layer. Finally, the results were converted into dimensionless numbers to elucidate physical phenomena and plotted as Sherwood number versus Reynolds number for mass transfer performance and Nusselt number versus Reynolds number for heat transfer performance.     

Study on the thermoplastic vulcanizate using ultrasonically treated rubber powder

Nowadays, waste EPDM (ethylene propylene diene monomer) increasingly has been causing significant environmental problems with increasing numbers of vehicles. From the perspective of the environment and economics, recycling is the best method to treat waste materials. This study investigated waste EPDM/PP (polypropylene) blends with waste EPDM. Waste EPDM powders were treated ultrasonically, which physically modifies the rubber particles to confer good mechanical properties. Also investigated were the relevance of the mass percentage of the dispersed phase, the influence of the geometry and rotation speeds of the screw used in extrusion, and the melting temperature of PP materials on the morphology and mechanical properties of the blend. The purpose of this study was to develop a valuable thermoplastic elastomer from waste EPDM. This study concentrated on determining the optimum conditions for producing a blend by extrusion, including parameters of screw geometry, screw rotational speed, and operating temperature. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2503–2507, 2003     

Fabrication of a gradient refractive index preform using laminar shear mixing

A gradient refractive index rod was successfully prepared by a new fabrication method using laminar shear mixing, and a graded index polymer optical fiber that satisfied IEEE1394b was obtained from the method. To fabricate the gradient refractive index rod, a liquid monomer mixture with a relatively low refractive index was placed in a prepared cylindrical glass reactor and a transparent polymer rod with a higher refractive index was introduced at the center of the reactor. The reactor and the polymer rod were then rotated concurrently with a small rotating speed difference to generate a Couette flow in the liquid phase. The centrifugal force generated by rotation and the polymer diffusion into the liquid monomer mixture developed a graded concentration profile in a radial direction. The Couette flow could reduce the concentration fluctuation in a tangential direction. In addition, the graded index profile could be controlled by the copolymer composition of the rod and its diameter. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1100–1104, 2005     

Isothermal crystallization kinetics and melting behavior of nylon/saponite and nylon/montmorillonite nanocomposites

DSC thermal analysis and X‐ray diffraction have been used to investigate the isothermal crystallization behavior and crystalline structure of nylon 6/clay nanocomposites. Nylon 6/clay has prepared by the intercalation of ε‐caprolactam and then exfoliating the layered silicates by subsequent polymerization. The DSC isothermal results reveal that introducing saponite into the nylon structure causes strongly heterogeneous nucleation induced change of the crystal growth process from a two‐dimensional crystal growth to a three dimensional spherulitic growth. But the crystal growth mechanism of nylon/montmorillonite nanocomposites is a mixed two‐dimensional and three‐dimensional spherulitic growth. The activation energy drastically decreases with the presence of 2.5 wt % clay in nylon/clay nanocomposites and then slightly increases with increasing clay content. The result indicates that the addition of clay into nylon induces the heterogeneous nucleation (a lower ΔE) at lower clay content and then reduces the transportation ability of polymer chains during crystallization processes at higher clay content (a higher ΔE). The correlation among crystallization kinetics, melting behavior, and crystalline structure of nylon/clay nanocomposites is also discussed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2196–2204, 2004     

Temperature effect on the permeation through poly(2-hydroxyethyl methacrylate) membrane

The temperature dependence of permeability through highly syndiotactic poly(2-hydroxyethyl methacrylate) [P(HEMA)] membrane is reported for highly polar organic solutes such as ureas, methyl substituted ureas and amides, and for NaCl and Na₂SO₄. The membranes used were equilibrated in distilled water at each temperature before measurements. From the linear correlationship between the excess heat capacities, ?C_p^o(excess) in aqueous solution at infinite dilution and the permeability parameter PM^1/3, it is found that the water structure perturbing capability of the polar organic solutes is a controlling factor in the permeation mechanism at relatively low temperature, where P(HEMA) membrane has higher water content and more structured water. In addition, it is found that the poor separation for urea of cellulose acetate membrane in the reverse osmosis practice is due to the higher water structure-breaking capability of urea.     

Preparation of porous thin films of a partially aliphatic polyimide

A thermally labile polymer, poly(propylene glycol), was modified to obtain PPG having an amino end group. PPG was incorporated into a partially aliphatic polyimide based on an alicyclic dianhydride, and this afforded triblock copolymers containing various amounts of PPG blocks. The thermal properties of the copolymers were investigated by thermogravimetric analysis and differential scanning calorimetry. The thermal decomposition of the PPG block in the copolymers was carried out at 240°C under various pressures to obtain porous polyimide films. The pores remained during the thermolysis under a reduced pressure of 710 mmHg, whereas they collapsed under (near) atmospheric pressure. The pore size increased as the amount of the PPG block in the copolymers increased. The dielectric constants of the porous polyimides varied from 2.60 to 2.42 with the original copolymer composition. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 532–538, 2006     

Ce3+/Tb3+-coactived NaMgBO3 phosphors toward versatile applications in white LED,FED, and optical anti-counterfeiting

Ce³⁺/Tb³⁺ co-doped NaMgBO₃ phosphors were successfully synthesized by solid-state method. Under 381 nm excitation, the cyan emission owing to the 5d → 4f of Ce³⁺ ions and green emissions arising from the ⁵D₄ → ⁷F_J (J = 6, 5, 4, and 3) transitions of Tb³⁺ ions were seen in all the phosphors. Through theoretical analysis, one knows that the energy transfer from Ce³⁺ to Tb³⁺ ions with high efficiency of 83.74% was contributed by dipole–dipole transition. Furthermore, the internal quantum efficiency of NaMgBO₃:0.01Ce³⁺,0.03Tb³⁺ phosphor was 54.28%. Compared with that of at 303 K, the emission intensity of the developed products at 423 K still kept 73%, revealing the splendid thermal stability of the studied phosphors. Through utilizing the resultant phosphors as cyan-green components, the fabricated white-LED device exhibited an excellent correlated color temperature of 2785 K, high color-rendering index of 85.73, suitable luminance efficiency of 25.00 lm/W, and appropriate color coordinate of (0.4279, 0.3617). Aside from the superior photoluminescence, the synthesized phosphors also exhibited excellent cathode-luminescence properties which were sensitive to the current and accelerating voltage. Furthermore, the NaMgBO₃:0.01Ce³⁺,0.03Tb³⁺ phosphors with multi-mode emissions were promising candidates for optical anti-counterfeiting. All the results indicated that the Ce³⁺/Tb³⁺ co-doped NaMgBO₃ phosphors were potential multi-platforms toward white-LED, field emission displays, and optical anti-counterfeiting applications.     

Effect of low-cycle fatigue on the hot ductility of plain carbon steel

In a continuous casting steelmaking operation, the surface of a slab is under a condition that can be characterized as high-temperature, low-cycle fatigue in which the tensile and compressive stress is repeatedly developed. For this reason, for the evaluation of the hot ductility of a slab, considering the fatigue deformation is more feasible before a tensile or compressive test. In this study, the effects of low-cycle fatigue on the hot ductility of steels with a carbon content of 0.06–0.8 wt.% are investigated at various temperatures. For a carbon content of 0.06%, there were no significant differences between the RA values from a simple tensile test and those from a tensile test after fatigue deformation. The tendency of ductility deterioration with fatigue deformation is evident in 0.1 %C steel, and is due to the deformation-induced ferrite film that forms around the prior austenite grain. Conversely, high carbon steel containing 0.8 %C did not show a recovery of hot ductility in a low temperature region, and the specimen on which the tensile was measured after fatigue showed a higher hot ductility in the low temperature region, which is thought to result from the pearlite refinement effects. As the results obtained in this work showed noticeable differences in the hot ductility of carbon steel through the test conditions, it is suggested that for more accurate data, fatigue deformation be adopted in which the temperature range in an unbending operation is determined in the steelmaking factory.     

Effects of anodizing voltage on the anodized and hydrothermally treated titanium surface

Anodic oxidation is the process of creating a titanium oxide layer with various defects more dense and stable. In this study, a dense, stable and porous oxide layer was formed using anodic spark oxidation on pure titanium surface and hydroxyapatite crystals were formed on its surface via a hydrothermal treatment. A mixture of 0.02M−GP (Glycerolphosphate disodium salt) and 0.2M-CA (Calcium acetate) was used as an electrolyte. By increasing the anodizing voltage to 220, 260, 300, and 360 V, the effects of the anodizing voltage were examined by evaluating the film properties after anodization and a hydrothermal treatment. Breakdown occurred around 230 V. As the voltage increased after breakdown, the pore size increased. After the hydrothermal treatment, the amount of HA crystal precipitation was also increased as the voltage increased. The mean surface roughness (Ra) of the anodizing surface was also increased as the voltage increased. The Ra value was larger in the hydrothermally treated group compared with the group treated with anodization as a result of the HA crystals present on the surface after the hydrothermal treatment. Corrosion resistance of the surface modified by anodization was significantly increased in a saline solution compared to that for the non-treated group; this increased further after the hydrothermal treatment. These increases were most likely due to a thick stable oxide layer formed through anodization. Thus, it is believed that titanium with its surface modified through anodic spark oxidation would be a suitable biomaterial due to its corrosion resistance and biocompatibility.     

Boron distribution in a low-alloy steel

Boron distribution in a low-alloy steel (15B26:0.25C-0.29Cr-0.03Ti-0.028Al-0.0016B) has been characterized employing Fission Track Etching (FTE) method. The characteristics of boron distribution with variation of cooling rate after austenitization and through case-hardened depth after carburization were analyzed. Hardenability of 15B26 steel was also evaluated through Jominy-end-quench test and the results are as follows: It was observed that, in austenitized 15B26 steel, boron was distributed uniformly over the whole area of specimen with a little segregation along the austenite grain boundaries at higher cooling rates and boron precipitates were formed in the intergranular as well as transgranular regions at lower cooling rates. Jominy equivalents (HRC 35) of 15B26 steel were fairly increased between the Jominy temperatures of 820°C and 850°C, which might result from the increase of the amount of soluble boron in austenite due to the dissolution of borocarbides between 820°C and 850°C. In carburized 15B26 steel, the different through thickness features of boron distribution from the carburized surface were found; coarse nodular boron precipitates up to the depth of 150 μm; uniform distribution of dissolved boron between 150~650 μm; and segregation of boron atoms along grain boundaries in the regions deeper than 650 μm.