Effect of irradiation on the impact and seismic response of a spent fuel storage and transport cask

The spent fuel storage and transport cask must withstand various accident conditions such as fire, free drop and puncture in accordance with the requirement of the IAEA and domestic regulations. The spent fuel storage and transport cask should maintain the structural safety not to release radioactive material in any condition. And also the effects of the irradiation should be considered because the spent fuels stored in the cask for a long time and be possible to change the mechanical properties of the cask.In this study, the changed mechanical properties of the cask after irradiation for the 30 years storage periods are assumed and applied to the impact analysis using ABAQUS/Explicit code and seismic analysis using ANSYS code. The stress intensity on each part of the cask is calculated and the effects of irradiation are studied and structural integrity of the package is evaluated.     

Design of the dummy coil for magnet power supply

It is necessary to test it on a dummy coil, before using a magnet power supply (MPS) to energize a Poloidal Field (PF) coil in the Korea Superconducting Tokamak Advanced Research (KSTAR) device. The dummy coil should accept the same large current from the MPS as the PF coil and be within the capability of the utilities located at the KSTAR site. Therefore a coil design based on the characteristics of the MPS and other restrictive conditions needed to be made. There are three requirements to be met in the design: an electrical requirement, a structural requirement, and a water cooling requirement. The electrical requirement was that the coil should have an inductance of 40 mH. For the structural requirement, the material should be non magnetic. The coil support structure and water cooling manifold were made of SUS 304. The water cooling requirement was that there should be sufficient flow rate so that the temperature rise ΔT should not exceed 12 °C for operation at 12.5 kA for 5 min. Square cross-section hollow conductor with dimensions of 38.1 mm × 38.1 mm was used with a 25.4 mm center hole for cooling water. However, as a result of tests, it was found that the electrical and structural requirements were satisfied but that the water cooling was over designed. It is imperative that the verification will be redone for a test with 12.5 kA for 5 min.     

A priori risk-informed approach to ensure the compliance with discharge limits for liquid radioactive effluent to be discharged from APR 1400

ABSTRACT

In order to develop a methodology to guarantee the conformance to operational discharge limits for liquid effluent from a NPP at an early stage of design, a risk-informed approach was proposed and its applicability was verified for APR 1400. Existing methodology to calculate risk-based detection limit for a single radionuclide was improved by incorporating a new model to derive more realistic pathway dose factors. A new simple expression was also proposed to adjust risk-based detection limits for multiple radionuclides mixture if necessary. In addition, a new procedure to warrant the compliance with discharge limits by controlling detection limits of only a few principal radionuclides was established in accordance with risk-informed concept. Through case studies for APR 1400 to be commissioned at a hypothetical site, it was shown that calculated pathway dose factors are more realistic for majority of radionuclides. It also turns out that neither present detection limits nor unadjusted risk-based detection limits can be justified when the radionuclide composition is unknown, however further adjustment of detection limits or increasing additional dilution factor resolves the problem. Finally, ten principal radionuclides were identified and shown to be enough for liquid effluent control at APR 1400 from a risk-informed point of view.     

Biomimetic micropatterning of silica by surface-initiated polymerization and microcontact printing

Micropatterns of silica on a gold substrate were generated by a biomimetic approach, namely, the biosilicification of silicic acids. The procedure consists of three simple steps: pattern generation of a polymerization initiator, (BrC(CH(3))(2)COO(CH(2))(11)S)(2), by microcontact printing; surface-initiated, atom-transfer radical polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA) from the patterned area; and polycondensation of silicic acids. The tertiary amine-containing polymer, pDMAEMA, aided in the spatially controlled polycondensation of silicic acids on surfaces in the presence of phosphate ions, and micropatterns of silica on a gold substrate were successfully generated in combination with the technique of microcontact printing. The procedure could be extended to the controlled fabrication of silica patterns with any size, shape, or thickness.     

Venom Peptide Toxins Targeting the Outer Pore Region of Transient Receptor Potential Vanilloid 1 in Pain: Implications for Analgesic Drug Development

The transient receptor potential vanilloid 1 (TRPV1) ion channel plays an important role in the peripheral nociceptive pathway. TRPV1 is a polymodal receptor that can be activated by multiple types of ligands and painful stimuli, such as noxious heat and protons, and contributes to various acute and chronic pain conditions. Therefore, TRPV1 is emerging as a novel therapeutic target for the treatment of various pain conditions. Notably, various peptides isolated from venomous animals potently and selectively control the activation and inhibition of TRPV1 by binding to its outer pore region. This review will focus on the mechanisms by which venom-derived peptides interact with this portion of TRPV1 to control receptor functions and how these mechanisms can drive the development of new types of analgesics.     

Effect of surface structure on biomechanical properties and osseointegration

The purpose of this study is to improve the bone-bonding ability between titanium implants and living bone through the control of geometric design and chemical compositions of an implant surface. We compared the tissue healing response and resulting implant stability for three surface designs by characterizing the histological and mechanical properties of the healing tissue around smooth-surfaced Ti–6Al–4V (SS), CP-Ti plasma-spray-coated (PSC), alkali- and heat-treated (AHT) implants. The implants were transversely inserted into a dog thighbone and evaluated at 4, 8, and 12 weeks. Histological examination indicated that initial matrix mineralization leading to osseointegration occurred more rapidly with the AHT implant. During the 4, 8, and 12 week healing periods, new bone on the surface of AHT implant showed denser growth than that on the SS and PSC implants. The more extensive tissue integration and more rapid matrix mineralization with the AHT implant were reflected in the mechanical test data, which demonstrated superior attachment strength and interfacial stiffness for the AHT implant after healing for 4, 8 and 12 weeks of healing because of the mechanical interlocking in the micrometer sized rough surface and the large bonding area between bone and implant caused by the nanosized porous surface structure. Histological and mechanical data demonstrate that with the appropriate surface design selection, bone bone-bonding ability can be improved and can induce acceleration of the healing response, thereby improving the potential for implant osseointegration.     

A study on the factors that affect the adoption of Smart Water Grid

Due to recent climate changes that accompany drastic changes in water recycle process, extreme floods and droughts are occurring frequently throughout the world. In response to these events, Smart Water Management that refers to implement intelligent water information systems by IT convergence is considered as a new paradigm. In this study, we seek to explore the Smart Water Management, especially the adoption of Smart Water Grid Technology. We aim to review previous studies to identify factors that influence the adoption of the Smart Water Grid and to analyze the importance and priority of the factors affecting Smart Water Grid adoption, thereby presenting the successful adoption measures for Smart Water Grid in Korea. This study set a research model with the influencing factors in relation to the adoption of new IT technologies that were identified through the literature reviews of previous studies based on the TOE framework. This study also conducted empirical analysis of the findings and found out that the issue of privacy protection and security due to hacker’s attack would be emerged as a significant risk factor.     

Effect of cladding on the stress intensity factors in the reactor pressure vessel

In general, reactor pressure vessels (RPV) are cladded with stainless steel to prevent corrosion and radiation embrittlement. The ASME Sec. XI specifies that a subclad crack which may be found during the in-service inspection must be considered as a semi-elliptical surface crack when the thickness of cladding is less than 40% of the crack depth. In order to refine the fracture assessment procedures for such subclad cracks, three-dimensional finite element analyses were applied for various subclad cracks embedded in the base metal. A total of 18 crack geometries were analyzed, and the results were compared with those for idealized semi-elliptical surface cracks for two different loading conditions, i.e. internal pressure and pressurized thermal shock. The resulting stress intensity factors for subclad cracks were 50–70% less than those for idealized surface cracks. It has been proven that the condition specified on the ASME Sec. XI is overly conservative for subclad cracks which are assumed to be surface cracks.     

Characterization of the Secretome of a Specific Cell Expressing Mutant Methionyl-tRNA Synthetase in Co-Culture Using Click Chemistry

Co-culture system, in which two or more distinct cell types are cultured together, is advantageous in that it can mimic the environment of the in vivo niche of the cells. In this study, we presented a strategy to analyze the secretome of a specific cell type under the co-culture condition in serum-supplemented media. For the cell-specific secretome analysis, we expressed the mouse mutant methionyl-tRNA synthetase for the incorporation of the non-canonical amino acid, azidonorleucine into the newly synthesized proteins in cells of which the secretome is targeted. The azidonorleucine-tagged secretome could be enriched, based on click chemistry, and distinguished from any other contaminating proteins, either from the cell culture media or the other cells co-cultured with the cells of interest. In order to have more reliable true-positive identifications of cell-specific secretory bodies, we established criteria to exclude any identified human peptide matched to bovine proteins. As a result, we identified a maximum of 719 secreted proteins in the secretome analysis under this co-culture condition. Last, we applied this platform to profile the secretome of mesenchymal stem cells and predicted its therapeutic potential on osteoarthritis based on secretome analysis.     

The Regenerative Effects of c-Met Agonistic Antibodies in Vocal Fold Atrophy

Background: Atrophy of the vocal folds and the accompanying glottic insufficiency affect the quality of life. Although growth factors have been used to treat muscle atrophy, their effectiveness is limited by their short half-life. Methods: In total, 15 rabbits and 24 rats were used for the study. The right recurrent laryngeal nerves of all animals were transected. One month following nerve transection, PBS (PBS group), rHGF (HGF group), or a c-Met agonistic antibody (c-Met group) was injected into the paralyzed vocal folds. The larynges of the rabbits were harvested from each group for histologic examination and subjected to PCR analysis. Results: Cross-sectional areas (CSAs) of thyroarytenoid muscles were evaluated. The c-Met group had increased CSAs compared to the PBS and HGF groups, but there were no significant differences compared to normal controls. The expression levels of myogenesis-related genes were evaluated three weeks after the injection. The expression levels of myosin heavy chain IIa were significantly increased in the PBS group, while the expression levels of MyoD were increased in the c-Met group. Conclusions: The c-Met agonistic antibody showed promise for promoting muscle regeneration in a vocal fold palsy model.