Environmental effects on the electrical behavior of pentacene thin-film transistors with a poly(methyl methacrylate) gate insulator

The electrical properties of top-contact pentacene thin-film transistors (TFTs) with a poly(methyl methacrylate) (PMMA) gate dielectric were analyzed in air and vacuum environments. Compared to the vacuum case, the pentacene TFT in air exhibited lower drain currents and more pronounced shifts in the threshold voltage upon reversal of the gate voltage sweep direction, together with a decrease in the field-effect mobility. These characteristic variations were explained in terms of two distinctive actions of polar H₂O molecules in pentacene TFT. H₂O molecules were suggested to diffuse under the source and drain contacts and interrupt the charge injection into the pentacene film, whereas those that permeate at the pentacene/PMMA interface retard hole depletion in and around the TFT channel. The diffusion process was much slower than the permeation process. The degraded TFT characteristics in air could be recovered mostly by storing the device under vacuum, which suggests that the air instability of TFTs is due mainly to the physical adsorption of H₂O molecules within the pentacene film.     

Pixel‐Structured Scintillator with Polymeric Microstructures for X‐Ray Image Sensors

We introduce a pixel‐structured scintillator realized on a flexible polymeric substrate and demonstrate its feasibility as an X‐ray converter when it is coupled to photosensitive elements. The sample was prepared by filling Gd₂O₂S:Tb scintillation material into a square‐pore‐shape cavity array fabricated with polyethylene. For comparison, a sample with the conventional continuous geometry was also prepared. Although the pixelated geometry showed X‐ray sensitivity of about 58% compared with the conventional geometry, the resolving power was improved by about 70% above a spatial frequency of 3 mm^?1. The spatial frequency at 10% of the modulation‐transfer function was about 6 mm^?1.     

Interconnection Technology Based on InSn Solder for Flexible Display Applications

A novel interconnection technology based on a 52InSn solder was developed for flexible display applications. The display industry is currently trying to develop a flexible display, and one of the crucial technologies for the implementation of a flexible display is to reduce the bonding process temperature to less than 150°C. InSn solder interconnection technology is proposed herein to reduce the electrical contact resistance and concurrently achieve a process temperature of less than 150°C. A solder bump maker (SBM) and fluxing underfill were developed for these purposes. SBM is a novel bumping material, and it is a mixture of a resin system and InSn solder powder. A maskless screen printing process was also developed using an SBM to reduce the cost of the bumping process. Fluxing underfill plays the role of a flux and an underfill concurrently to simplify the bonding process compared to a conventional flip‐chip bonding using a capillary underfill material. Using an SBM and fluxing underfill, a 20 μm pitch InSn solder SoP array on a glass substrate was successfully formed using a maskless screen printing process, and two glass substrates were bonded at 130°C.     

CMOS digital duty cycle correction circuit for multi-phase clock

A digital duty cycle correction circuit with a fixed-delay rising-edge output is proposed for use in applications with the multi-phase clock and the standby mode. Two integrators are used in the duty cycle detector to eliminate the effect of reference voltage variations. The output duty cycle is adjusted to 50/spl plusmn/0.25% throughout the input duty cycle range from 20% to 80% at the frequency of 1.25 GHz. 0.18 /spl mu/m CMOS technology is used in this work.     

Modular Layer‐by‐Layer Assembly of Polyelectrolytes,Nanoparticles, and Molecular Catalysts into Solar‐to‐Chemical Energy Conversion Devices

The design and fabrication of solar‐to‐chemical energy conversion devices are enabled through interweaving multiple components with various morphologies and unique functions using a versatile layer‐by‐layer assembly method. Cationic and anionic polyelectrolytes are used as an electrostatic adhesive to assemble the following functional materials: plasmonic Ag nanoparticles for improved light harvesting, upconversion nanoparticles for utilization of near‐infrared light, and polyoxometalate water oxidation catalysts for enhanced catalytic activity. Polyelectrolytes also have an additional function of passivating the surface recombination centers of the underlying photoelectrode. These functional components are precisely assembled on a model photoanode (e.g., Fe₂O₃ and BiVO₄) in a desired order and various combinations without degradation of their intrinsic properties. As a result, the performance of water oxidation photoanodes is synergistically enhanced. This study can enable the design and fabrication of novel solar‐to‐chemical energy conversion devices.     

Functionalization of Tailored Porous Carbon Monolith for Decontamination of Radioactive Substances

As the control over radioactive species becomes critical for the contemporary human life, the development of functional materials for decontamination of radioactive substances has also become important. In this work, a three-dimensional (3D) porous carbon monolith functionalized with Prussian blue particles was prepared through removal of colloidal silica particles from exfoliated graphene/silica composite precursors. The colloidal silica particles with a narrow size distribution were used to act a role of hard template and provide a sufficient surface area that could accommodate potentially hazardous radioactive substances by adsorption. The unique surface and pore structure of the functionalized porous carbon monolith was examined using electron microscopy and energy-dispersive X-ray analysis (EDS). The effective incorporation of PB nanoparticles was confirmed using diverse instrumentations such as X-ray diffraction (XRD), Fourier-transform infrared (FT-IR), and X-ray photoelectron spectroscopy (XPS). A nitrogen adsorption/desorption study showed that surface area and pore volume increased significantly compared with the starting precursor. Adsorption tests were performed with ¹³³Cs ions to examine adsorption isotherms using both Langmuir and Freundlich isotherms. In addition, adsorption kinetics were also investigated and parameters were calculated. The functionalized porous carbon monolith showed a relatively higher adsorption capacity than that of pristine porous carbon monolith and the bulk PB to most radioactive ions such as ¹³³Cs, ⁸⁵Rb, ¹³⁸Ba, ⁸⁸Sr, ¹⁴⁰Ce, and ²⁰⁵Tl. This material can be used for decontamination in expanded application fields.     

Effects of electron beam irradiation on microbial inactivation and quality of kimchi paste during storage

The effects of electron beam irradiation on microbial inactivation and quality of noninoculated and inoculated (Listeria monocytogenes) kimchi pastes were examined. Kimchi paste samples were irradiated at doses of 2, 4, 6, 8 and 10 kGy and stored for 21 days at 4 °C. Irradiation (10 kGy) reduced the populations of total aerobic bacteria, lactic acid bacteria, and yeast and moulds in the samples by 1.72, 2.24 and 0.86 log CFU g^?1, respectively, compared to the control. In particular, coliforms were not detected at 8 and 10 kGy, and the population of L. monocytogenes in inoculated samples was significantly decreased by 2.67 log CFU g^?1. Electron beam irradiation delayed the changes in O₂ and CO₂ concentrations, pH, acidity and reducing sugar content observed in kimchi paste during storage. These results suggest that electron beam irradiation can be used to improve the microbiological safety and shelf life of kimchi paste.     

Two additional cases of metformin‐associated encephalopathy in patients with end‐stage renal disease undergoing hemodialysis

We report on two additional cases of metformin‐associated encephalopathy in patients with end‐stage renal disease (ESRD) undergoing hemodialysis. Two patients were seen at our hospital with abnormal neurological signs and symptoms. Magnetic resonance imaging (MRI) revealed the same pattern of high signal intensity in both basal ganglia in T2‐weighted images in the two patients. The two patients had started taking metformin 5 and 6 weeks earlier at the same dose of 1000 mg per day. Metformin was immediately stopped, and regular hemodialysis was conducted. Their signs and symptoms resolved completely after these measures. The high signal intensity in both ganglia in T2‐weighted MRI also disappeared. We should suspect metformin‐induced encephalopathy and withdraw the drug when presented with diabetic patients with chronic kidney disease and neurological signs and symptoms of unknown cause.     

Field measurement and estimation of ventilation flow rates by using train-induced flow rate through subway vent shafts

This study measured and estimated the subway vent shaft air flow rate induced by moving trains in the tunnel. This work estimated the flow rate via the tunnel structure and train movement to determine the quantitative effect of vent shafts as air purification systems of natural ventilation to improve the air quality management of a subway. The amount of air suctioned into the tunnel is significantly larger than that vented from the tunnel. Thus, placing vent shafts near subway stations is desirable for natural ventilation systems. Experimental approaches to measure train-induced flow rates have not yet been published. Results of this study provide useful fundamental data to study the natural ventilation in a subway. Therefore, this study suggested the significant design factors required to control indoor air quality in a subway.