Composition and Recyclability Analysis of Poly(Vinyl Chloride) Recovered from Computer Power Cables and Commercial Wires

The product‐based recycling of the electrical and electronic devices and their by‐products are limited due to their complex characteristics and dissimilar material characteristics. However, such recycling procedures give clear ideas about the composition and possible recycling options of the materials present in them. Consequently, the present study deals with isolation and recycling of the major polymeric fraction present in the waste computer power supply cables (CPS) and electrical power supply (EPS) wires isolated from the household items. The composition analysis of CPS and EPS indicates that the poly(vinyl chloride) (PVC) is the major polymeric fraction along with minor content of polyethylene (PE) and polycarbonate (PC). Further, this research compares the mechanical recyclability of the PVC recovered from the CPS and EPS. Among the PVC's analyzed, PVC isolated from the EPS has been indicated superior mechanical properties. Similarly, thermal degradation analysis (TGA) indicated higher thermal stability for the PVC isolated from EPS. Besides, the flammability of the PVC specimens was studied and concluded with the possible mechanism occurring during combustion. Moreover, this study points out that PVC recovered from EPS and CPS can be mechanically recycled for the elimination of the waste. J. VINYL ADDIT. TECHNOL., 26:213–223, 2020. © 2019 Society of Plastics Engineers     

Lamotrigine‐loaded polyacrylate nanoparticles synthesized through emulsion polymerization

A series of copolymeric nanoparticles of the partially water‐soluble monomer ethyl methacrylate and the water‐soluble monomer 2‐hydroxyl ethyl methacrylate were synthesized from emulsions containing sodium dodecyl sulfate via free‐radical polymerization. Lamotrigine, as a model drug, was loaded in nanoparticles during in situ polymerization. A stable and transparent poly(ethyl methacrylate‐co‐hydroxyl ethyl methacrylate) nanolatex was produced for all compositions and characterized for particle size by dynamic light scattering and transmission electron microscopy. Particles were found to be smaller than 50 nm in size. Structural characterization of copolymers was done by infrared spectrometry, gel permeation chromatography, and NMR spectroscopy. Drug encapsulation efficiency was determined by ultraviolet (UV)–visible spectrometry and was found to be 26–62% for copolymers with different compositions. UV data suggest molecular‐level dispersion of the drug in the nanoparticles. In vitro drug‐release studies showed the controlled release of lamotrigine. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Parameter estimation in multiple contact CO2 miscibility simulation with uncertain experimental core flooding data

CO₂ flooding, which is an efficient method of enhanced oil recovery, is a very complicated process involving phase behavior. To understand the performance of CO₂ flooding and provide accurate data for designing reservoir development, a comprehensive investigation of the phase behavior of CO₂ miscible flooding and an accurate compositional reservoir simulation needs to be conducted. In PVT modeling, an effective and more physically reasonable equation of state model was achieved and the feasibility of CO₂ miscible flooding was determined by multiple contact minimum miscibility pressure (MCMMP) calculation. Furthermore, compositional reservoir simulation studies for predicting CO₂ miscible performance were designed and constructed with core flooding data. By matching with laboratory core flooding data, we can estimate parameters with uncertainty. The objective of this study was to find a work flow for parameter estimation in CO₂ miscible flooding process that can be used to design and optimize field CO₂ miscible floods.     

Mechanical,thermal, and microwave properties of conducting composites of polypyrrole/polypyrrole‐coated short nylon fibers with acrylonitrile butadiene rubber

Pyrrole was polymerized in the presence of anhydrous ferric chloride as oxidant and p‐toluene sulfonic acid as dopant. Polypyrrole‐coated short nylon fibers were prepared by polymerizing pyrrole in the presence of short nylon fibers. The resultant polypyrrole (PPy) and PPy‐coated nylon fiber (F‐PPy) were then used to prepare rubber composites based on acrylonitrile butadiene rubber (NBR). The cure pattern, direct current (DC) conductivity, mechanical properties, morphology, thermal degradation parameters, and microwave characteristics of the resulting composites were studied. PPy retarded the cure reaction while F‐PPy accelerated the cure reaction. Compared to PPy, F‐PPy was found to be more effective in enhancing the DC conductivity of NBR. The tensile strength and modulus values increased on adding PPy and F‐PPy to NBR, suggesting a reinforcement effect. Incorporation of PPy and F‐PPy improved the thermal stability of NBR. The absolute value of the dielectric permittivity, alternating current (AC) conductivity, and absorption coefficient of the conducting composites prepared were found to be much greater than the gum vulcanizate. PPy and F‐PPy were found to decrease the dielectric heating coefficient and skin depth significantly. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Spray dryer processed graphene oxide/reduced graphene oxide for high-performance supercapacitor

This study deals with the utility of mini spray dryer process to improve the dispersibility, of graphene oxide(GO) and its application for high-performance supercapacitor. Initially, the neutral solution of GO was obtained using the modified Hummer's method. After this, the prepared GO solution was processed by mini spray dryer to obtain a more purified, lighter, and dispersed form of GO which is named as spray dryer processed GO (SPGO). The SPGO thus obtained showed excellent dispersibility behavior with various solvents, which is not found in case of conventional oven drying. Furthermore, utility of SPGO and its reduced form (r-SPGO) for supercapacitor applications have been investigated. Results obtained from the cyclic voltammetry(CV) analysis, impedance, and charge-discharge behavior of supercapacitor fabricated using r-SPGO shows enhanced features. Therefore, the simple spray dried GO and its reduced form, that is, r-SPGO can be utilized as a potential candidate for the supercapacitor application. Herein, as synthesized SPGO exhibited the specific capacitance of 12.07 and 37.6 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively, at a scan rate of 5 mV/s. On the other hand, reduced form of SPGO, that is, r-SPGO showed the specific capacitance of 27.16 and 230 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively.     

Moisture absorption by cyanate ester modified epoxy resin matrices. Part I. Effect of spiking parameters

The moisture absorption of cyanate ester modified epoxy resin matrices has been studied under thermal spiking conditions. Enhanced moisture absorption has been observed at spike-temperatures above 120 °C. The results of the desorption studies on both control specimens and the spiked specimens showed that some of the water molecules remained entrained in the polymer. It is postulated that this water could be associated with that which is hydrogen bonded or from the hydrolysis of isolated residual cyanate ester groups because the concentration of entrained water remains constant at spike-temperatures below 180 °C. Above 180 °C a thermally activated process, leading to chain scission as indicated by a reduced recoverability of the glass transition temperature (T_g) on drying.On isothermal resorption, the moisture concentration was found to be similar to that achieved through thermal spiking, showing that the entrained water at the lower spike-temperatures can also be achieved under mild conditions. The T_g is reversibly recovered to within 5 °C, which indicates a degree of relaxation rather than degradation. The moisture diffusion coefficient estimated from the resorption curves is lower than those estimated from the absorption and desorption curves. The isothermal resorption diffusion coefficient also decreased with increasing spike temperature. It is proposed that thermal spiking induced a relaxation of the network but as the spike-temperature approaches the transition region of the wet polymer, further hydrolytically induced relaxation events become feasible.     

5th International Symposium on Electrochemical Impedance Spectroscopy Marilleva (Trento), Italy, June 2001

Preface

5th International Symposium on Electrochemical Impedance Spectroscopy Marilleva (Trento), Italy, June 2001     

The Yeast ATF1 Acetyltransferase Efficiently Acetylates Insect Pheromone Alcohols: Implications for the Biological Production of Moth Pheromones

Many moth pheromones are composed of mixtures of acetates of long‐chain (≥10 carbon) fatty alcohols. Moth pheromone precursors such as fatty acids and fatty alcohols can be produced in yeast by the heterologous expression of genes involved in insect pheromone production. Acetyltransferases that subsequently catalyze the formation of acetates by transfer of the acetate unit from acetyl‐CoA to a fatty alcohol have been postulated in pheromone biosynthesis. However, so far no fatty alcohol acetyltransferases responsible for the production of straight chain alkyl acetate pheromone components in insects have been identified. In search for a non‐insect acetyltransferase alternative, we expressed a plant‐derived diacylglycerol acetyltransferase (EaDAcT) (EC 2.3.1.20) cloned from the seed of the burning bush (Euonymus alatus) in a yeast system. EaDAcT transformed various fatty alcohol insect pheromone precursors into acetates but we also found high background acetylation activities. Only one enzyme in yeast was shown to be responsible for the majority of that background activity, the acetyltransferase ATF1 (EC 2.3.1.84). We further investigated the usefulness of ATF1 for the conversion of moth pheromone alcohols into acetates in comparison with EaDAcT. Overexpression of ATF1 revealed that it was capable of acetylating these fatty alcohols with chain lengths from 10 to 18 carbons with up to 27‐ and 10‐fold higher in vivo and in vitro efficiency, respectively, compared to EaDAcT. The ATF1 enzyme thus has the potential to serve as the missing enzyme in the reconstruction of the biosynthetic pathway of insect acetate pheromones from precursor fatty acids in yeast.     

Glass‐polymer melt hybrids. I: Viscoelastic properties of novel affordable organic‐inorganic polymer hybrids

A novel class of organic‐inorganic polymer hybrids was developed by melt‐blending up to 50 (v/v) % [about 83 (w/w) %] tin‐based polyphosphate glass (Pglass) and low‐density polyethylene (LDPE) in conventional plastics processing equipment. The liquid‐ and solid‐state rheology of the polymer hybrids was studied under oscillatory shear flow and deformation to understand the behavior of these materials and to accelerate efforts to melt process the Pglass with organic polymers. All the materials were found to be linearly viscoelastic in the range of temperature and frequencies examined and their viscoelastic functions increased with increasing Pglass concentration. The Pglass significantly enhanced the shear‐thinning characteristics of the Pglass‐LDPE hybrid, indicating the presence of nonlinear chemical and physical interactions between the hybrid components. Morphological examination of the materials by scanning electron microscopy revealed interesting evolution of microstructure of the Pglass phase from droplets (or round beads) to elongated and interpenetrating network structures as the glass concentration was increased in the Pglass‐LDPE hybrids. Melt viscosities of the materials were well described by a simple power‐law equation and a Maxwellian (Hookean) model with three relaxation times. Time‐temperature superpositioning (TTS) of the complex viscosity versus frequency data was excellent at 170°C < T < 220°C and the temperature dependencies of the shift factors conformed excellently well to predictions from an Arrhenius‐type relation, enabling calculation of the flow‐activation energies (25–285 kj/mol) for the materials. The beneficial function of the Pglass in the hybrid system was significantly enhanced by pre‐treating the glass with coupling agents prior to incorporating them into the Pglass‐LDPE hybrids.     

Investigation and simulation of a cross-flow air classifier

Extensive experimental tests and a computational study of the performance in a cross-flow air classifier have been carried out. A computational fluid dynamics (CFD) package—Fluent—is used to first understand and explain why the cuts or the sharpness of cut of this classifier are not as sharp as they ought to be, and then to optimize the geometry and operational conditions.

Flow fields of the classifier under various set-up conditions and geometry were measured by using laser Doppler anemometry (LDA). Using sieve analyses and the HELOS-laser method, the patterns of behaviour of separation parameters such as cut size and sharpness of cut have been investigated at different boundary conditions.

Using the Fluent package, a two-dimensional computational fluid dynamics model has been developed. The model is based on the Euler–Lagrangian approach. Different turbulence models have been tested. Both Fluent 4.5, with a structured grid, and Fluent 5.1, with structured and unstructured grids, have been used.

Discussions and analyses of the experimental, as well as the computational results, are presented. The simulation with a structured grid shows good agreement with experimental data, except for the sharpness of cut. The reasons of poor performance of the classifier have been found. The geometry is optimized and other conditions were also improved. The performance of the classifier is improved. The experimental observations together with the computed results should increase the depth of understanding of the underlying mechanisms.