A Liquid Metal Based Multimodal Sensor and Haptic Feedback Device for Thermal and Tactile Sensation Generation in Virtual Reality

Virtual reality (VR) has been widely used for training, gaming, and entertainment, and the value of VR is continually increasing as a contact-free technology. For an immersive VR experience, measuring finger movements and providing appropriate feedback to the hand are as important as visual information, given the necessity of the hands for activities in daily life. Thus, a hand-worn VR device with motion sensors and haptic feedback is desirable. In this paper, a multimodal sensing and feedback glove is developed with soft, stretchable, lightweight, and compact sensor and heater sheets manufactured by direct ink writing (DIW) of liquid metal, eutectic gallium-indium (eGaIn). In the sensor sheet, ten sensors and three vibrators are embedded to measure finger movements and provide vibro-haptic feedback. The other heater sheet provides thermo-haptic sensation in accurate and rapid manner via model-based feedback control even under stretched conditions. The multimodal sensing and feedback glove allows users to feel the contact status and discriminate materials with different temperature. Performance of the proposed multimodal glove is verified under VR environments including touching and pushing two blocks of different materials and grabbing a heated metal ball submerged in hot water.     

Improvement of the field emission characteristics of an oxidized porous polysilicon using annealed Pt/Ti surface emitter electrode

The field emission characteristics of an oxidized porous polysilicon were investigated with different annealing temperatures. Pt/Ti, Ir, and Au/NiCr were used as surface emitter electrodes, and Pt/Ti emitter showed highly efficient and stable electron emission characteristic compared with the conventional Au/NiCr electrode. Thin Ti layer played an important role in promotion of adhesion of Pt to SiO₂ surface and uniform distribution of electric field on the OPPS surface. Additionally, the Ti layer efficiently blocked the diffusion of emitter metal, which resulted in more reliable emission characteristics. Pt/Ti emitter annealed at 350 °C/1 h showed the highest efficiency of 3.36% at V_ps=16 V, which resulted from the improvement of interfacial contact characteristics of thin emitter metal to an oxidized porous polysilicon. Annealing above 400 °C showed that Pt/Ti and Ir emitter electrode were thermally more stable than Au/NiCr emitter.     

Modeling and Simulation of New Encoding Schemes for High‐Speed UHF RFID Communication

In this paper, we present novel high‐speed transmission schemes for high‐speed ultra‐high frequency (UHF) radio‐frequency identification communication. For high‐speed communication, tags communicate with a reader using a high‐speed Miller (HS‐Miller) encoding and multiple antennas, and a reader communicates with tags using extended pulse‐interval encoding (E‐PIE). E‐PIE can provide up to a two‐fold faster data rate than conventional pulse‐interval encoding. Using HS‐Miller encoding and orthogonal multiplexing techniques, tags can achieve a two‐ to three‐fold faster data rate than Miller encoding without degrading the demodulation performance at a reader. To verify the proposed transmission scheme, the MATLAB/Simulink model for high‐speed backscatter based on an HS‐Miller modulated subcarrier has been designed and simulated. The simulation results show that the proposed transmission scheme can achieve more than a 3 dB higher BER performance in comparison to a Miller modulated subcarrier.     

Self‐Healing Reduced Graphene Oxide Films by Supersonic Kinetic Spraying

The industrial scale application of graphene and other functional materials in the field of electronics has been limited by inherent defects, and the lack of simple deposition methods. A simple spray deposition method is developed that uses a supersonic air jet for a commercially available reduced graphene oxide (r‐GO) suspension. The r‐GO flakes are used as received, which are pre‐annealed and pre‐hydrazine‐treated, and do not undergo any post‐treatment. A part of the considerable kinetic energy of the r‐GO flakes entrained by the supersonic jet is used in stretching the flakes upon impact with the substrate. The resulting “frozen elastic strains” heal the defects (topological defects, namely Stone‐Wales defect and C₂ vacancies) in the r‐GO flakes, which is reflected in the reduced ratio of the intensities of the D and G bands in the deposited film. The defects can also be regenerated by annealing.     

Statistical Models for Hot Electron Degradation in Nano-Scaled MOSFET Devices

In a MOS structure, the generation of hot carrier interface states is a critical feature of the item's reliability. On the nano-scale, there are problems with degradation in transconductance, shift in threshold voltage, and decrease in drain current capability. Quantum mechanics has been used to relate this decrease to degradation, and device failure. Although the lifetime, and degradation of a device are typically used to characterize its reliability, in this paper we model the distribution of hot-electron activation energies, which has appeal because it exhibits a two-point discrete mixture of logistic distributions. The logistic mixture presents computational problems that are addressed in simulation.     

Single, Depolarized, CW Supercontinuum-Based Wavelength-Division-Multiplexed Passive Optical Network Architecture With C-Band OLT, L-Band ONU, and U-Band Monitoring

We propose and experimentally demonstrate a novel bidirectional wavelength-division-multiplexed passive optical network architecture that fully utilizes the superior optical properties of an incoherent continuous-wave (CW) supercontinuum (SC) source. The proposed architecture, which incorporates low-cost Fabry-Perot laser diodes that have been wavelength locked by spectrum-sliced beams from a depolarized 130-nm-bandwidth CW SC source, is based on a unique wavelength band allocation scheme of the C-band for an optical line terminal (OLT), the L-band for optical network units (ONUs), and the U-band for channel monitoring. A cost-effective network that features a single broadband source at the OLT, and no additional wavelength- band-selective monitoring beam reflector at each ONU can be readily achieved. The experimental demonstration presented in this paper is carried out at a data rate of 622 Mb/s over a 25-km standard single-mode fiber.     

Detection of laryngeal function using speech andelectroglottographic data

The purpose of this research was to develop quantitative measures for the assessment of laryngeal function using speech and electroglottographic (EGG) data. We developed two procedures for the detection of laryngeal pathology: 1) a spectral distortion measure using pitch synchronous and asynchronous methods with linear predictive coding (LPC) vectors and vector quantization (VQ) and 2) analysis of the EGG signal using time interval and amplitude difference measures. The VQ procedure was conjectured to offer the possibility of circumventing the need to estimate the glottal volume velocity wave-form by inverse filtering techniques. The EGG procedure was to evaluate data that was "nearly" a direct measure of vocal fold vibratory motion and thus was conjectured to offer the potential for providing an excellent assessment of laryngeal function. A threshold based procedure gave 75.9 and 69.0% probability of pathological detection using procedures 1) and 2), respectively, for 29 patients with pathological voices and 52 normal subjects. The false alarm probability was 9.6% for the normal subjects.     

Environmental effects on the electrical behavior of pentacene thin-film transistors with a poly(methyl methacrylate) gate insulator

The electrical properties of top-contact pentacene thin-film transistors (TFTs) with a poly(methyl methacrylate) (PMMA) gate dielectric were analyzed in air and vacuum environments. Compared to the vacuum case, the pentacene TFT in air exhibited lower drain currents and more pronounced shifts in the threshold voltage upon reversal of the gate voltage sweep direction, together with a decrease in the field-effect mobility. These characteristic variations were explained in terms of two distinctive actions of polar H₂O molecules in pentacene TFT. H₂O molecules were suggested to diffuse under the source and drain contacts and interrupt the charge injection into the pentacene film, whereas those that permeate at the pentacene/PMMA interface retard hole depletion in and around the TFT channel. The diffusion process was much slower than the permeation process. The degraded TFT characteristics in air could be recovered mostly by storing the device under vacuum, which suggests that the air instability of TFTs is due mainly to the physical adsorption of H₂O molecules within the pentacene film.     

Unraveling the Significance of Li+/e−/O2 Phase Boundaries with a 3D-Patterned Cu Electrode for Li–O2 Batteries

The reaction kinetics at a triple-phase boundary (TPB) involving Li⁺, e⁻, and O₂ dominate their electrochemical performances in Li–O₂ batteries. Early studies on catalytic activities at Li⁺/e⁻/O₂ interfaces have enabled great progress in energy efficiency; however, localized TPBs within the cathode hamper innovations in battery performance toward commercialization. Here, the effects of homogenized TPBs on the reaction kinetics in air cathodes with structurally designed pore networks in terms of pore size, interconnectivity, and orderliness are explored. The diffusion fluxes of reactants are visualized by modeling, and the simulated map reveals evenly distributed reaction areas within the periodic open structure. The 3D air cathode provides highly active, homogeneous TPBs over a real electrode scale, thus simultaneously achieving large discharge capacity, unprecedented energy efficiency, and long cyclability via mechanical/electrochemical stress relaxation. Homogeneous TPBs by cathode structural engineering provide a new strategy for improving the reaction kinetics beyond controlling the intrinsic properties of the materials.     

A 3 Gb/s transmitter with a tapless pre-emphasis CML output driver

A 3 Gb/s wireline transmitter (Tx) with a tapless pre-emphasis current-mode logic output driver is presented in this paper. The proposed output driver can support 2.5, 6 and 10 dB pre-emphasis without any additional current tap. It can reduce the current consumption of the output driver by 30 %. The 1.5 GHz phase-locked loop (PLL), multi-phase generator, and 26-to-1 serializer are utilized to serialize 26-bit parallel data to 1-bit 3 Gb/s serial data stream. The rms and peak-to-peak jitters of PLL are 2.97 and 22.5 ps, respectively. The eye opening of the proposed output driver at 3 Gb/s is 0.8UI with a 10 dB loss channel. The current consumption of the output driver is only 5.14 mA, and the Tx is 9 mA. The area of the Tx is 0.72 mm² using the 0.11 μm CMOS process.