信号调制系统实现角位移测量（英文）

采用基于定时器LM555的非稳态多谐振荡器和通用频数转换设计了一种变面积式电容传感器信号调制系统用于角位移测量。变面积式电容器连接在基于定时器的非稳态电路内,其角位移的变化引起电容的变化,进而引起定时器电路输出时间周期的变化。定时器电路输出波形的时间周期与电容呈线性关系,因而与角位移也是线性关系。定时器输出经通用频数转换器进一步处理后可用于测量。实验结果显示,时间周期与角位移在0-180°范围内呈线性关系,将不确定度与平均时间周期相关联,即为平均标准差,亦称为标准误差,其值为±0.023μs。该测量系统使用简单,可用于电子和工业仪器中。     

Removal of congo red using activated carbon and its regeneration

Activated carbon is used for the removal of colored toxic congo red dye. The effects of different operating conditions like, initial dye concentration, contact time, pH and temperature are studied for adsorption of congo red by a known amount of activated carbon (1.0g/L) under stirred batch condition. The zero point of charge of the activated carbon is found about 6.6. About 90% dye is removed for initial concentration of 50 and 100mg/L, it is about 80% at pH 7.0. Maximum adsorption (about 100%) of dye is observed at pH 2.0 for the concentration range studied here. Freundlich isotherm is found to fit the equilibrium data more adequately. Pseudo second order kinetic model explain successfully the kinetic data. The surfactant enhanced carbon regeneration (SECR) technique using both cationic and anionic surfactants is adopted for the regeneration of spent carbon by desorbing the dye. A kinetic model for dye desorption from the commercial activated carbon (CAC) is also proposed. Anionic surfactants show better performance than the cationic ones. Efficiency of dye desorption using surfactants is also compared with the desorption using pH change.     

Analysis of nanoindentation response of diatom frustules

Diatom frustules have been suggested for numerous nanotechnological applications. Experimental studies using nanoindenter have shown that the hardness and the stiffness of the frustules vary with location of indentation. To gain further insight, a computational framework has been developed where the Berkovich nanoindentation experiments were simulated by a rigid-deformable contact process. Three different approaches that provide progressively increasing level of understanding of the deformation behavior of frustules were adopted. The differences in the mechanical responses of the frustule due to variation of indentation location, size of pores, and distribution of pores were analyzed. It has been found that the effective stiffness of the frustule is linearly related to the porosity level and does not depend on the frustule size or its pore architecture. It has been shown that a 3D porous shell computational model is more appropriate to simulate the experimentally obtained mechanical response of diatom frustules.     

Biodegradable film. IV. Printability study on biodegradable film

A starch‐based biodegradable (BD) low density polyethylene (LDPE) film can be directly printable without any corona treatment, unlike virgin LDPE film. Such a film shows poor adhesion and nail scratch resistance of the ink on the printed area of the film. In order to increase the adhesion and nail scratch resistance of the ink on the printed BD film, grafting of acrylonitrile onto the BD film is carried out. The polyacrylonitrile grafted BD film shows better adhesion, nail scratch resistance, and printability. The printability of the polyacrylonitrile grafted BD film is comparable to the conventional corona treated LDPE film. The extent of printability is a function of the surface smoothness, as well as the optimum percentage of grafting on the biodegradable film. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1273–1277, 2001     

Effect of thermal conditioning on the initiation threshold of secondary high-explosives

While most performance metrics of high-explosive (HE) based devices like detonation velocity, detonation pressure, and energy output are expected to degrade over time, the evolution of initiation threshold appears less clear, with claims of both increasing and decreasing trends in threshold having been made in the literature. This work analyzes D-optimally designed sequential binary test data for a few thermally conditioned porous-powder and polymer-bonded HE initiator systems using a Bayesian likelihood method employing the probit regression model. We find that in most cases the initiation threshold decreases (i. e., sensitivity increases) upon accelerated thermal conditioning. However, such results are nuanced and influenced by factors like the contact area of initiating stimulus, HE characteristics like density and specific surface area, as well as possible thermally induced changes to other materials and interfaces involved.     

Antimony polymers. III. Flame retardant behavior of chloroprene and natural rubber vulcanizates with antimony polymer

The antimony-containing polymer of bisphenol-A (BPA) and triphenyl antimony dinitrate was used as a flame retardant (FR) for chloroprene rubber (CR) and natural rubber (NR). The flame retardancy of this additive was monitored by the limiting oxygen index (LOI) measurements of the rubber vulcanizates and compared with that for antimony trioxide used as a FR additive. The thermogravimetric analysis (TGA) of the vulcanizates has also been studied. A structure flammability relationship has been established. The effect of this FR additive on physical properties of the vulcanizates undergoing heat aging and solvent leaching has also been evaluated. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 927–935, 1998     

A new rigid rodlike colored poly(amide hydrazide): Thermal,optical anisotropic,and mechanical behavior

A new aromatic all-para oriented poly(amide hydrazide) containing an azo group in the main chain was prepared by reacting a symmetric diamine containing a preformed hydrazide group, viz., N,N′-bis(4-aminobenzoyl)hydrazine (BABH), with 4,4′-azobenzoyl chloride (ADBC). The thermal behavior of the polymer was studied by TGA and DSC in air and nitrogen. Films of the polymer were prepared by two processes, viz., wet and dry processes, by using its solution in DMAc containing LiCl. The optical anisotropy, surface morphology, and tensile properties of the films were studied. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 1211–1215, 1997