Investigation on natural radiation level and its hazardous nature of river sediments using γ-ray spectroscopy

The content of natural radionuclides (²³⁸U, ²³²Th, ⁴⁰K) in sediment samples of Ponnaiyar River, taken from different depths, were determined using a γ-ray spectroscopic system with a NaI(TI) detector with an aim of evaluating the radiation hazard. The results are compared with Indian and world average values. To know the complete radiological characteristics, the radiological indices such as absorbed dose rate, annual effective dose equivalent (indoor and outdoor), radium equivalent activity, hazard index (H _ex and H _in), γ-index, activity utilization index, and excess lifetime cancer risk were calculated. The results obtained were discussed and compared with the recommended values. The outdoor γ-dose rates were measured at each sampling site using an environmental radiation dosimeter. The measured results were compared with literature values and correlated with the calculated absorbed dose rate. Averages of all the radiation hazard indices and concentrations of all the measured radionuclides in all the layers are lower than the recommended level. The origin of the detected radionuclides is assessed by comparing the present results with the corresponding values for the earth crust and other rock formations.     

Long‐Range Nanoparticle Surface‐Energy‐Transfer Ruler for Monitoring Photothermal Therapy Response

A recent gold nanotechnology‐driven approach opens up a new possibility for the destruction of cancer cells through photothermal therapy. Ultimately, photothermal therapy may enter into clinical therapy and, as a result, there is an urgent need for techniques to monitor the tumor response to therapy. Driven by this need, a nanoparticle surface‐energy‐transfer (NSET) approach to monitor the photothermal therapy process by measuring a simple fluorescence intensity change is reported. The fluorescence intensity change is due to the light‐controlled photothermal release of single‐stranded DNA/RNA via dehybridization during the therapy process. Time‐dependent results show that just by measuring the fluorescence intensity change, the photothermal therapy response during the therapy process can be monitored. The possible mechanism and operating principle of the NSET assay are discussed. Ultimately, this NSET assay could have enormous potential applications in rapid, on‐site monitoring of the photothermal therapy process, which is critical to providing effective treatment of cancer and multidrug‐resistant bacterial infections.     

Assessing Flood Induced Land-Cover Changes Using Remote Sensing and Fuzzy Approach in Eastern Gujarat (India)

Natural hazards such as flooding can cause changes in land-cover. The present study deals with the changes in land-cover in three worst affected districts (Anand, Vadodara and Kheda) of Gujarat state in India due to severe flood during 2005. The Indian Remote Sensing (IRS) P6 Linear Imaging Self Scanning (LISS) III satellite imageries of pre- and post-flooding periods were used as sources of information for the study area. Three classification approaches (unsupervised ISODATA, supervised Maximum Likelihood Classifier, and fuzzy rule based) were used to extract flood induced land-cover information. Results obtained from the above classification approaches were compared. Soft computing technique such as fuzzy based image classification gave better separability amongst classes as compared to hard classification techniques. The accuracy assessment showed that the fuzzy approach can predict land-cover more accurately than traditional approach and also showed great potential for dealing with mapping of flood induced land-cover. Unsupervised classification results for the period October 2004 to October 2005 revealed decrease in inland water bodies (14.49%) and agricultural area (6.42%) while increase in remaining land-cover. During February 2005 to February 2006, all land-cover classes decreased except agricultural fallow and sparse vegetation. In case of supervised classification, decreasing trend was observed only in case of agricultural area (6.78%) during October 2004 to October 2005. Similarly, during February 2005 to February 2006, increase in coastal water bodies (0.73%) and sparse vegetation (1.7%) was observed where as decreasing trend was noticed in the remaining land-cover classes. In fuzzy based classification, only decrease in agricultural area (7.09%) was observed from October 2004 to October 2005, whereas during February 2005 to February 2006, decrease in area was exhibited in all land-cover classes except coastal water bodies and sparse vegetation. Change detection indicated interchange of areas between inland and coastal water bodies and decrease in agricultural area leading to increase in area of agricultural fallow and sparse vegetation.     

Impact of Scaffold Micro and Macro Architecture on Schwann Cell Proliferation under Dynamic Conditions in a Rotating Wall Vessel Bioreactor

Over the last decade tissue engineering has emerged as a powerful alternative to regenerate lost tissues owing to trauma or tumor. Evidence shows that Schwann cell containing scaffolds have improved performance in vivo as compared to scaffolds that depend on cellularization post implantation. However, owing to limited supply of cells from the patients themselves, several approaches have been taken to enhance cell proliferation rates to produce complete and uniform cellularization of scaffolds. The most common approach is the application of a bioreactor to enhance cell proliferation rate and therefore reduce the time needed to obtain sufficiently significant number of glial cells, prior to implantation.In this study, we show the application of a rotating wall bioreactor system for studying Schwann cell proliferation on nanofibrous spiral shaped scaffolds, prepared by solvent casting and salt leaching techniques. The scaffolds were fabricated from polycaprolactone (PCL), which has ideal mechanical properties and upon degradation does not produce acidic byproducts. The spiral scaffolds were coated with aligned or random nanofibers, produced by electrospinning, to provide a substrate that mimics the native extracellular matrix and the essential contact guidance cues.At the 4 day time point, an enhanced rate of cell proliferation was observed on the open structured nanofibrous spiral scaffolds in a rotating wall bioreactor, as compared to static culture conditions. However, the cell proliferation rate on the other contemporary scaffolds architectures such as the tubular and cylindrical scaffolds show reduced cell proliferation in the bioreactor as compared to static conditions, at the same time point. Moreover, the rotating wall bioreactor does not alter the orientation or the phenotype of the Schwann cells on the aligned nanofiber containing scaffolds, wherein, the cells remain aligned along the length of the scaffolds. Therefore, these open structured spiral scaffolds pre-cultured with Schwann cells, in bioreactors could potentially shorten the time needed for grafts for peripheral nerve regeneration.     

Grain Floatation During Equiaxed Solidification of an Al-Cu Alloy in a Side-Cooled Cavity: Part I—Experimental Studies

Experimental studies were performed to investigate the role and influence of grain movement on macrosegregation and microstructure evolution during equiaxed solidification. Casting experiments were performed with a grain-refined Al-Cu alloy in a rectangular sand mold. For the aluminum alloy studied, the equiaxed grains are lighter than the bulk melt and thus float up. Experiments were designed to investigate floatation phenomena of equiaxed grains in the presence of thermosolutal convection. Cooling curves were recorded at key locations in both the casting and the chill. Quantitative image analysis and spatial chemical analysis were performed on the solidified casting to observe the chemical and microstructural inhomogeneity created by the melt convection and solid floatation. Several notable features that can be attributed to grain movement were observed in temperature histories, macrosegregation patterns, and microstructures. In our experiments, the floatation of grains influences the thermal conditions and the overall flow direction in the casting cavity. In some cases, the induced flow resulting from the grain movement caused a flow reversal. This in turn influences the solidification direction, microstructure evolution, and the overall macrosegregation behavior.     

Computation of approximate optimal policies in a partially observed inventory model with rain checks

This paper proposes a new methodology to solve partially observed inventory problems. Generally, these problems have infinite-dimensional states that are conditional distributions of the inventory level. Our methodology involves linearizing the state transitions via unnormalized probabilities. It then uses an appropriate functional basis to represent the state. Considering the speed and stability of computations, we choose truncated Chebyshev polynomials as the basis. We use Fast Fourier Transforms along with an appropriate discretization of inventory levels to speed up the computations. These main ideas are blended to obtain an iterative algorithm to solve a partially observed inventory model with rain checks. In this model, the inventory manager (IM) does not know the inventory level when it is positive. Otherwise, the IM fully observes it. This model provides a context to illustrate our methodology, which applies to other such models. Although this model has been studied mathematically in the literature, the use of our algorithm provides a numerical approximation of the optimal order quantities. These are compared to the orders released under a base mean-stock policy, where the IM replaces the unobserved inventory level with its mean and applies the well-known base stock policy. We show numerically that the optimal order quantity is very close to the base mean-stock order quantity, when the variance of the inventory distribution is small. When the mean of the inventory distribution is large, the optimal order quantity is more than the base mean-stock quantity, and it is the other way around when the mean is small or negative. These insights are explained via uncertainty and information effects and their interplay. We expect this interplay to show up in other partially observed inventory models.     

Effect of chromium on the mechanical properties of powder-processed Fe–0.45 wt.% P alloys

The present investigation shows the role of chromium in Fe–P binary and Fe–P–Cr ternary alloys. The compositions are characterized in terms of microstructure, porosity content, hardness and tensile properties. The alloys were made using a hot powder forging technique. In this process mild steel encapsulated powders were hot forged into slabs. Then the slabs were hot rolled and annealed to relieve the residual stresses. Densifications as high as 98.9% of theoretical density have been realized. Microstructures of these alloys consist of single-phase ferrite only. Both Fe–0.45P and Fe–0.45P–3Cr alloys showed very high strength. As forged and hot rolled Fe–0.45P alloy showed low elongation. It was observed that, the addition of Cr to Fe–P based alloys caused an increase in strength associated with the reduction in ductility. Alloys developed in the present investigation were capable of hot working to very thin gage of sheets and wires.     

Schottky diode solar cells on electrodeposited copper phthalocyanine films

Schottky diode solar cells were fabricated on electrodeposited films of copper phthalocyanine (CuPc). The aluminum contact was deposited by two methods, viz. thermal evaporation and electron beam evaporation; the materials and electro-optical characteristics of these devices were compared. We achieved the highest ever reported open-circuit voltage of 1.19 V with the electrodeposited CuPc films. This is in contrast to an open-circuit voltage of 0.907 V reported in Schottky diode cells with evaporated CuPc films. β-Phase dominance in electrodeposited CuPc films was thought to be a major factor in enhanced performance. Effects of varying the CuPc thickness on the device performance were investigated.