Comparison of Different Oxidation Methods for Recalcitrance Removal of Landfill Leachate

In this work several oxidation methods, such as conventional ozonation, O₃/UV, O₃/UV/ferrous iron and Fenton oxidation, for the removal of recalcitrant organic matter present in landfill leachates are evaluated. The samples of the leachate are taken after a biological treatment and membrane ultra-filtration (UF). The contribution of the UV radiation and the effect of ferrous iron ions on the ozone process efficiency is discussed. At lower ozone dosages, the partial oxidation efficiency is reduced as compared to conventional ozonation and therefore, a higher degree of mineralization of the organic matter is achieved. Finally, the best results are obtained by the Fenton oxidation, however, based on economic considerations this method is not recommended.     

High-pressure compaction modelling of calcite (CaCO3) powder compact

Numerical simulation of manufacturing processes with working conditions at high pressure (above 1 GPa) requires constitutive data of the powder for the whole range of pressure and density. Most of the test apparatuses commonly used to obtain such data are only working in the lower pressure regions. Because of the absence of high-pressure data, many parameters have to be guessed or extrapolated. A material used in high-pressure applications is Calcite (CaCO₃). The material can be used as an insulator in high-pressure capsules it is also a common material in the earth core. An apparatus often used to generate high pressure during compaction is the Bridgman anvil apparatus. In this work experimental tests with a Bridgman anvil set-up using Calcite powder discs with different thicknesses were done. A nonlinear elastic-plastic cap model was developed to model the behaviour of powder material from low pressure and loose state to high pressure and solid state. The constitutive model was implemented in a finite element code. The constitutive data were identified by optimization of experimental data. Validation was done by numerically reproduce the mechanical behaviour of uni-axially pressing Calcite to different pressure (up to 5 GPa) including unloading. The load-displacement curves, density distribution and the surface displacement were measured and compared to the finite element results. The results of the compaction simulations agree reasonably well with the experimental results.     

Sparse district-heating in Sweden

This paper presents a review of the sparse district-heating research programme undertaken in Sweden between 2002 and 2006. The goal of the programme was to increase the future competitiveness for district heat in low heat density areas, e.g., suburban single-family houses and small villages. Such areas are unfavourable, since revenues from heat sold are low compared with the investment cost for the local distribution network. In Sweden, district heat has a dominant position in the heat market for residential and service-sector buildings. In order for the business to grow, it is necessary to increase the rate of expansion in the detached-house segment. This is why the programme was initiated. The extent of the programme was set at € 3.6 million with equal financing from the Swedish District-Heating Association and the Swedish Energy-Agency. The research was carried out in three phases: a state of the art survey; a development phase focused on productivity gains where new research on both technology and customer interaction was performed; and finally a demonstration phase where new methods were tested in full-scale field operation. The programme has shown that the Swedish district-heating industry needs to adjust in order to reach a higher profitability for sparse district-heating investments. Tradition from large-scale high-density district heating is hard to scale to fit sparse district-heating systems. For example, the construction becomes very labour intensive and the industry is weak when it comes to market-oriented business logic, sales and private customer interaction. Innovation seems to be a way forward and active management of innovations is a way to create increased value of the investments. Other keys to improving the profitability of sparse district-heating investments are more efficient working routines (resulting in higher productivity) and revised ways of customer communications. These seem more important than increasing efficiency in district-heating technology.     

螺旋齿轮与正齿轮的表面致密化

过去几十年,用于汽车的粉末冶金零件不断增长,对零件性能的要求也越来越高.汽车用的变速器齿轮的形状复杂,按照齿轮质量要求(DIN,ISO,AGMA等)几何精度很高,按齿面与齿根的耐久性要求力学性能也很高.对于制造复杂形状零件,粉末冶金法对控制成本很有效.通过增加对齿的选择性致密化,在增加很少费用下就能满足精度与力学性能要求.由压制、烧结、碾压致密化及最后热处理组成的工艺路线,可评估用粉末冶金制造的变速器齿轮的可行性.在研究中所用的螺旋齿轮与正齿轮,对致密化及所得到的齿轮的质量与齿根疲劳都进行了试验.     

Measuring structural similarity of semistructured data based on information-theoretic approaches

We propose and experimentally evaluate different approaches for measuring the structural similarity of semistructured documents based on information-theoretic concepts. Common to all approaches is a two-step procedure: first, we extract and linearize the structural information from documents, and then, we use similarity measures that are based on, respectively, Kolmogorov complexity and Shannon entropy to determine the distance between the documents. Compared to other approaches, we are able to achieve a linear run-time complexity and demonstrate in an experimental evaluation that the results of our technique in terms of clustering quality are on a par with or even better than those of other, slower approaches.     

A constraint-based variability modeling framework

Constraint-based variability modeling is a flexible, declarative approach to managing solution-space variability. Product variants are defined in a top-down manner by successively restricting the admissible combinations of product artifacts until a specific product variant is determined. In this paper, we illustrate the range of constraint-based variability modeling by discussing two of its extreme flavors: constraint-guarded variability modeling and constraint-driven variability modeling. The former applies model checking to establish the global consistency of product variants which are built by manual specification of variations points, whereas the latter uses synthesis technology to fully automatically generate product variants that satisfy all given constraints. Each flavor is illustrated by means of a concrete case study.     

Truthful Mechanisms for Selfish Routing and Two-Parameter Agents

We prove a general monotonicity result about Nash flows in directed networks, which generalizes earlier results and can be used for the design of truthful mechanisms in the setting where each edge of the network is controlled by a different selfish agent, who incurs costs when her edge is used.