Development of an event-specific detection method for genetically modified rice Kefeng?6 by quantitative real-time PCR

The genetically modified (GM) rice Kefeng?6 has gained resistance against several rice pests by inserting the cpti and cry1Ac genes. As this transgenic line is not approved for import, processing and cultivation in the European Union (EU), sensitive and specific detection methods need to be available to monitor any illegal presence of Kefeng?6 in food products within the EU. The aim of this study was to develop and validate an event-specific detection method by means of quantitative real-time PCR (qPCR) for the detection of Kefeng?6 in foodstuff. A primer pair and hydrolysis probe were designed according to the right border junction sequence of the transgene. The qPCR assay was validated according to the ENGL/EURL-GMFF guidelines for GMO testing and is presented according to the MIQE guidelines. The in-house validation process resulted in a limit of detection of 5 DNA copies of the transgene with confidence intervals (95?%) between 0.07 and 0.52, a PCR efficiency of 105?% and a correlation coefficient (R ²) value of 0.9997. The specificity of the assay was tested by end-point PCR, gel electrophoresis and subsequent sequencing of the PCR products. By testing DNA of several GM and non-GM crops, cross reactivity of the assay was not observed. Further, 35 food products were analyzed for the presence of Kefeng?6 by means of the event-specific detection method. For 9 out of 35 samples, PCR products for Kefeng?6 DNA were observed.     

The Adhesion‐Enhanced Contact Electrification and Efficiency of Triboelectric Nanogenerators

In the present work, the contact electrification of polymers that differ in adhesion strength is studied. Electrical current is measured along with adhesion in macroscale contacting‐separation experiments. Additionally, local adhesion and roughness are studied with atomic force microscopy to get deeper insight into relations between surface properties and electrification. Measurements reveal that higher surface charge is formed on more adhesive surfaces, thus confirming covalent bond cleavage as a mechanism for contact electrification of polymers. Investigated materials possess enhanced contact electrification making them attractive candidates for the conversion of mechanical energy to electrical in triboelectric nanogenerator devices.     

EU renewable energy support policy: Faith or facts?

The recent EU Commission proposal for promoting the supply of power from renewable energy sources was originally based on a pan-European, harmonised tradable green certificate (TGC) scheme. We suggest, on the basis of a multi-disciplinary analysis, that a pan-EU TGC system is not the way forward for Europe. It is vital that the Commission (and the majority of Member States) avoids implementation of such policy designs put forward by a coalition of vested interests. They should instead look at, and act upon, the available evidence from those countries that have experimented with TGCs (e.g. Flanders, UK and Sweden) and design policies that stand a better chance of meeting the criteria of effectiveness, efficiency and equity. In particular, the policies must enable EU to meet the immense innovation/industrialisation challenge by inducing the development of a capital goods industry that can, eventually, diffuse a broad range of technologies that use renewable energy sources. Only then we can acquire an ability to implement an industrial revolution in the energy system in a way that broadly meets the criteria of effectiveness and dynamic efficiency.     

On-line monitoring of fuel moisture-content in biomass-fired furnaces by measuring relative humidity of the flue gases

Combustion of biomass for heat and power production is continuously growing in importance, because of incentives for replacing fossil energy resources with renewable ones. In biomass combustion, the moisture content of the fuel is an essential operation parameter, which often fluctuates for biomass fuels. Variation in moisture content complicates the operation of the furnaces and results in an uncertainty in the energy content of the fuel delivered to a plant. The fuel moisture-content in a furnace may be determined either by direct measurement on the entering fuel or by measuring the moisture and oxygen contents of the flue gases deriving the moisture content of the fuel. However, reliable methods of a motivated cost for the small to medium-scale furnaces are today not available. An exception is if the furnace is equipped with flue-gas condenser, which can be used to estimate the moisture content of the flue gases. A limitation of this method is, though, that not all furnaces have flue-gas condensers and that the measured signal has an inherent time delay.In this work, measurement of the relative humidity (RH) of the flue gases from a furnace is investigated as the central component in the on-line monitoring of the moisture content of the fuel in a furnace. The method was analysed with humid air in a laboratory environment and tested for accuracy and dynamical behaviour in two biomass-fired heat-production units, one circulating fluidised-bed boiler (CFB) and one grate furnace. The results show that the method, which is easy to calibrate on site, can be used to predict the moisture content of the biomass fuel in the grate furnace with very good precision (<4% error). Furthermore, the method detects variations in moisture content of the furnace flue gases due to changes in the moisture content of the combusted fuel within the order of seconds. Since the transport time of the flue gases from the furnace to the measurement position is of the same order of magnitude, the total time for detection of a change in the moisture content of the fuel is small enough for the signal to be used to control both the fuel feed and the combustion air in a grate furnace.     

Parallel SAT Solving on Peer-to-Peer Desktop Grids

Satciety is a distributed parallel satisfiability (SAT) solver which focuses on tackling the domain-specific problems inherent to one of the most challenging environments for parallel computing—Peer-to-Peer Desktop Grids. Satciety efficiently addresses issues related to resource volatility and heterogeneity, limited node and network capabilities, as well as non-uniform communication costs. This is achieved through a sophisticated distributed task pool execution model, problem size reduction through multi-stage SAT formula preprocessing, context-aware memory management, and adaptive topology-aware distributed dynamic learning. Despite the demanding conditions prevailing in Desktop Grids, Satciety achieves considerable speedups compared to state-of-the-art sequential SAT solvers.     

Lebenslanger Datenschutz: Anforderungen an vertrauenswürdige Infrastrukturen

Die Dynamik der Technikentwicklung in den vergangenen Jahren konfrontiert Datenschützer immer wieder aufs Neue mit Risiken für die Privatsph?re der Betroffenen — und es sieht so aus, als ob sich dies in den n?chsten Jahren und Jahrzehnten nicht ?ndern wird. Konzepte für einen lebenslangen Datenschutz erfordern ein Umdenken vom kurzatmigen Systementwurf zu langfristigen und zukunftsf?higen Planungen.     

Influence of Whey Protein Addition and Feed Moisture Content on Chosen Physicochemical Properties of Directly Expanded Corn Extrudates

Production of extrudates from cereals is an often-used technological process in today’s world food industry. Extrudates from corn flour produced using the twin-screw extrusion process and enriched with whey protein concentrate represent high-quality source of proteins and fats. Whey protein concentrate (WPC) as a valuable source of proteins and minerals is one of the highest-quality components for possible extrudate enrichment. In this paper, the influence of various WPC addition and some extrusion process parameters such as feed moisture content ( Q_{\textH\text2 \textO} Q_{{{\text{H}}_{\text{2}} {\text{O}}}} ) on physicochemical properties of directly expanded corn flour extrudates manufactured in twin-screw co-rotating extruder was investigated. Whey protein concentrate was added in the following ratios 7.5%, 15% and 22.5% and water in 10.08, 12.18 and 14.28 L/h. Final composition of products is determined with measuring of protein, fat and water shares, water absorption index (WAI) and water solubility index (WSI). With added WPC and with increase of water volume flow, there was a significant rise in total protein, fat and water content in final products, as well as lowering of WSI and rising of WAI indexes. The statistical analysis of the obtained data shows that the lowest WSI and the highest WAI had samples with the largest share of WPC (22.5%) and water volume flow of 14.28 L/h. Colour is measured for each sample, and results were represented with hue angle (H), chroma (C) and lightness (L) values. Process parameters, WPC and Q_{\textH\text2 \textO} Q_{{{\text{H}}_{\text{2}} {\text{O}}}} influence the increase of saturation of C and lightness of L colour value, while H value stays unchanged. Mean value of H was 90.14 ± 1.06, which corresponds to dominance of yellow colour of samples.     

Opportunities for and limits to Academics as System builders—The case of realizing the potential of gasified biomass in Austria

Gasified biomass is a technology that has the potential to partially replace fossil fuels for the production of heat, electricity, transport fuels, synthetic natural gas (BioSNG) and chemicals. In the context of climate change, biomass gasification is an attractive technology. It is, however, still in the early phase of its diffusion and much of the knowledge resides in the academic sector and in small companies—the technological innovation system (TIS) is in the process of being formed. Austria is one of the leading European countries in this field and much of the development in Austria can be traced to one prominent individual, Professor Hermann Hofbauer at the Technical University of Vienna. The purpose of this paper is to analyze how and the extent to which an individual academic, Professor Hofbauer, has influenced the formation of a TIS centred on gasified biomass in Austria. We find that his impact is multidimensional and significant but that there is also a frictional and intentional resistance that obstructs the commercialisation of the new technology. These sources of resistance go beyond the ability of an individual system builder to handle. Policy makers, therefore, need to add a strong element of system building activities that interact with and supplement those pursued by Professor Hofbauer.     

Pellet production from agricultural raw materials - A systems study

The demand for biofuel pellets has increased considerably in recent years, causing shortage of the traditional raw materials sawdust and wood shavings. In this study, the costs and energy requirements for the production of pellets from agricultural raw materials were analysed. The materials studied were Salix, reed canary grass, hemp, straw, screenings, rape-seed meal, rape cake and distiller’s waste. Four production scales were analysed, having an annual output of 80,000, 8000, 800 and 80 tonnes of pellets per year. It was concluded that the raw materials of greatest interest were Salix and reed canary grass. They had competitive raw material costs and acceptable fuel properties and could be mixed with sawdust in existing large-scale pelleting factories. Straw had low production costs but can cause serious ash-related problems and should, as also is the case for screenings, be avoided in small-scale burners. Hemp had high raw material costs and is of less commercial interest, while distiller’s waste, rape-seed meal and rape cake had higher alternative values when used as protein feed. The scale of production had a crucial influence on production costs. The machinery was used much more efficiently in large-scale plants, resulting in clear cost savings. Small-scale pelleting, both static and mobile, required cheap raw materials, low labour costs and long utilisation times to be profitable. In most cases, briquetting would be more commercially viable. The energy use in manufacturing pellets from air-dried crops was generally no higher than when moist sawdust was used as the raw material.