Effects of molybdenum additions on the structure, depth, and austenite grain size of the case of carburized 0.13% carbon steels

Carbon (0.13%) steel samples containing about 0.48% molybdenum (Mo) singly and in combination with nickel (Ni) were carburized in a natural Titas gas atmosphere at a temperature of 1223 K (950 °C) and at a pressure of about 0.10 MPa (15 psia) for time periods ranging from 1–4 h followed by slow cooling in the furnace. Their microstructure was studied by optical microscopy. The austenite grain size of the case and the case depths were determined. It was found that Mo and Ni alone and in combination decrease the thickness of the cementite network near the surface of the carburized case of the steels. However, Ni is found to be more effective than Mo in decreasing the thickness of cementite network. Both Mo and Ni enhance the formation of Widmanstätten cementite plates at the grain boundary and within the grains near the surface of the carburized steels. However, Ni alone is more effective than Mo in the formation of Widmanstätten cementite plates. In the presence of Ni, Mo is much more effective in the formation of Widmanstätten cementite plates than Mo in absence of Ni. It was also revealed that both Mo and Ni increased the case depth. Ni is more effective than Mo in increasing the case depth. The combined effect of Mo and Ni is much greater than that of either Mo or Ni alone in increasing case depth. Mo as Mo carbide (Mo₂C) particles refined the austenite grain size of the carburized case. Ni in solution was not found to have any effect in restricting grain growth of austenite, but the presence of Ni enhances the austenite grain size refining effect of Mo in the carburized case.     

Capacity planning in job-shop environment

Presented here is a computerized capacity planning system for the IBM Microcomputer family. The system maintains the profile of the job shop in a data base along with data pertinent to various products that can be manufactured in the shop. Projected orders for the planning period are input to the system with their associated quantities and delivery dates. The system uses the forward and backward loading rules in generating capacity loading scenarios. User selects the best course of action which may satisfy delivery dates subject to the limitations of the work centers. Efficiency figures are provided to aid the user in his/her decision.     

Layout-Specific Circuit Evaluation in 3-D Integrated Circuits

In this paper, we describe a comprehensive layout methodology for bonded three-dimensional integrated circuits (3D ICs). In bonded 3D integration technology, parts of a circuit are fabricated on different wafers, and then, the wafers are bonded with a glue layer of Cu or polymer based adhesive. Using our layout methodology, designers can layout such 3D circuits with necessary information on inter-wafer via/contact and orientation of each wafer embedded in the layout. We have implemented the layout methodology in 3DMagic. Availability of 3DMagic has led to interesting research with a wide range of layout-specific circuit evaluation, from performance comparison of 2D and 3D circuits to layout-specific reliability analyses in 3D circuits. Using 3DMagic, researchers have designed and simulated an 8-bit encryption processor mapped into 2D and 3D FPGA layouts. Moreover, the layout methodology is an essential element of our ongoing research for the framework of a novel Reliability Computer Aided Design tool, ERNI-3D.     

Effect of thermal treatment on ZnO substrate for epitaxial growth

ZnO is a highly efficient photon emitter, and has optical and piezoelectric properties that are attractive for a variety of applications in sensors and potentially optoelectronic devices such as emitters. Due to its identical stacking order and close lattice match to GaN, it is also being developed as a substrate material for GaN epitaxy. However, the surface finish of the ZnO is such that much of the damage induced by sawing and follow up mechanical polishing remains. We developed a thermal treatment method to eliminate surface damage on the 0 face of ZnO (0 0 0 1) to prepare it for epitaxial growth. Atomic force microscopy images of ZnO (0 0 0 1) annealed at 1050 °C for 3 h etc. show that residual scratches from mechanical polishing are removed and atomically flat, terrace-like surfaces are attained. In addition, low-temperature photoluminescence and high-resolution X-ray diffraction measurements have been employed to investigate the effect of annealing on ZnO substrates.     

Lowpass and bandpass transadmittance filter using operational amplifier pole

A new topology simultaneously implementing lowpass (LP) and bandpass (BP) transadmittance filtering signals using a single operational amplifier (OA), one capacitor, and two resistors is presented. The input impedance is very high which is essential for cascading without employment of buffers. The circuit uses absolute minimum number of active and passive components. The filter employs pole-model of OA and as such has acquired suitability for extended frequency operation. The circuit permits separate adjustment of natural frequency (ω₀) and quality factor (Q) in an orthogonal manner. The circuit has low sensitivity figures unlike the reported single amplifier biquads. The PSPICE simulation results are included.     

Analytical modeling of imperfect bond between coated fibers and matrix material

The present study is intended to find the stress intensity factors (SIF) and strain energy release rates (SERR) at the tips of an interface crack in a non-homogeneous medium. The boundary-value problem governing a three-phase concentric cylinders model is used to analyze annular interfacial crack problems with Love's strain functions. The complex form of a singular integral equation of second kind is formulated using Bessel's functions in Fourier domain. Stress intensity factors (SIF) and total strain energy release rates (SERR) are calculated using Jacoby polynomials. For validity of the equations of Stress Intensity Factors, the Singular Integral Equation (SIE) of a three concentric cylinders model is reduced to the SIE for a two concentric cylinders model and results are compared with previous results of Erdogan.     

Current distribution, resistance, and inductance forsuperconducting strip transmission lines

A method for the calculation of the current distribution, resistance, and inductance matrices for a system of coupled superconducting transmission lines having finite rectangular cross-section is presented. These calculations allow accurate characterization of both high-T_c and low-T _c superconducting strip transmission lines. For a single stripline geometry with finite ground planes, the current distribution, resistance, inductance, and kinetic inductance are calculated as functions of the penetration depth for various film thicknesses. These calculations are then used to determine the penetration depth for Nb, NbN, and YBa₂Cu₃O_7-x superconducting thin films from the measured temperature dependence of the resonant frequency of a stripline resonator. The calculations are also used to convert measured temperature dependence of the quality factor to the intrinsic surface resistance as a function of temperature for an Nb stripline resonator     

Identification, ontogeny, and regulation of an interleukin-6-like factor in the rat seminiferous tubule

The present study's aims are to search for the presence of interleukin-6 bioactivity (IL-6) in medium conditioned by various testicular cell types and to investigate the cellular and hormonal regulation of testicular IL-6 production. Sertoli cells prepared from rats of increasing ages (20, 35, and 45 days) secreted IL-6 in vitro, whereas medium conditioned by pachytene spermatocytes, early spermatids, and peritubular cells showed no activity. Lipopolysaccharide (LPS) and latex beads, two known stimulators of monocyte/macrophage IL-6 production, markedly stimulated IL-6 secretion by Sertoli cells at all the ages investigated. Maximum levels of IL-6 were reached after 6 h of culture of Sertoli cells with LPS and after 24 h with latex beads. When Sertoli cells were cocultured with pachytene spermatocytes, early spermatids, or fractions containing residual bodies and cytoplasts from elongated spermatids, only the latter significantly stimulated IL-6 levels. Maximum levels of IL-6 were attained by adding 2 x 10(6) residual bodies to Sertoli cells; a significant increase in IL-6 secretion was seen after 6 h, and maximum levels were observed after 24 h. The levels of IL-6 varied throughout different stages of the seminiferous epithelium cycle; highest levels were observed in stages II-VI and lowest in stages VII-VIII. IL-6 bioactivities induced by LPS and residual bodies and cytoplasts from elongated spermatids could be totally neutralized with a specific monoclonal antibody at all of the ages studied. FSH, phorbol myristate acetate, and IL-1 alpha augmented Sertoli cell IL-6 secretion in a dose-dependent manner. Furthermore, FSH and (Bu)2cAMP differentially stimulated IL-6 secretion during the seminiferous epithelial cycle. It is concluded that the release of IL-6 from Sertoli cells is regulated by a complex interplay between residual bodies and humoral factors.