Synergistic Processing of Skim Milk with High Pressure Nitrous Oxide,Heat, Nisin,and Lysozyme to Inactivate Vegetative and Spore-Forming Bacteria

Individual and combined effects of high pressure nitrous oxide (HPN₂O), heat, and antimicrobials on the inactivation of Escherichia coli, Listeria innocua, and Bacillus atrophaeus endospores in milk were all evaluated after 20-min treatments. Stand-alone milk treatments with HPN₂O (15.2 MPa), heat (45 and 65 °C), or nisin (50 and 150 IU mL^?1) resulted in log₁₀ reductions ranging only from 0.1 to 2.1 for E. coli and L. innocua. Combining HPN₂O (15.2 MPa) with heat (65 °C) inactivated 6.0 and 5.1 log₁₀ in the vegetative bacteria, respectively. Similarly, reductions of 5.9 and ≥ 6.0 log₁₀ of respective E. coli and L. innocua cells in milk were achieved through a combination of HPN₂O (15.2 MPa), heat (65 °C), and nisin (150 IU mL^?1). A 2.5 log₁₀ cycle inactivation of spores was obtained by HPN₂O, nisin (at both 50 and 150 IU mL^?1), and lysozyme (50 μg mL^?1) at 85 °C. Combining these processing techniques resulted in significantly greater microbial inactivation (p < 0.05) than the sum of individual reductions from each treatment alone, indicating synergistic effects. HPN₂O irrespective of processing temperatures did not cause any occurrence of sub-lethally injured cells or disruption in colloidal stability of milk at 65 and 85 °C (p ≥ 0.05). Color and pH changes in milk following the most demanding treatment conditions were minimal.     

An application of univariate marginal distribution algorithm in MIMO communication systems

The paper discusses a sequence detector based on univariate marginal distribution algorithm (UMDA) that jointly estimates the symbols transmitted in a multiple input multiple output (MIMO) communication system. While an optimal maximum likelihood detection using an exhaustive search method is prohibitively complex, it has been shown that sphere decoder (SD) achieves the optimal bit error rate (BER) performance with polynomial time complexity for smaller array sizes. However, the worst‐case complexity of SD is exponential in the problem dimensions, this brings in question its practical implementation for larger number of spatial layers and for higher‐order signal constellation. The proposed detector shows promising results for this overly difficult and complicated operating environment, confirmed through simulation results. A performance comparison of the UMDA detector with SD is presented for higher‐order complex MIMO architectures with limited average transmit power. The proposed detector achieves substantial performance gain for higher‐order systems attaining a near optimal BER performance with reduced computational complexity as compared with SD. Copyright © 2009 John Wiley & Sons, Ltd.     

Κ‐CN gene polymorphism in Nili‐ravi buffalo,Achai and Sahiwal cattle of Pakistan

Kappa‐casein (κ‐CN) is the subtype of casein protein, an important constituent of bovine milk protein. The current study was undertaken to investigate the genetic polymorphism in κ‐CN gene of Nili‐ravi buffalo, Achai and Sahiwal cattle of Pakistan using polymerase chain reaction–restriction fragment length polymorphism (PCR‐RFLP) technique. The Nili‐ravi buffalo was found to be monomorphic (genotype BB only) for κ‐CN gene. Achai cattle were polymorphic for κ‐CN (having three genotypes AA, AB and BB) with a frequency of 0.70, 0.18 and 0.12, respectively, while in Sahiwal cattle, both the genotypes AA and AB were found with genotypic frequencies of 0.92 and 0.08, respectively. The presence of genotype BB in Achai cattle is surprising as it is absent in most of the cattle breeds worldwide.     

SPARC deficiency leads to early-onset cataractogenesis

PURPOSE: To determine the role of SPARC (secreted protein, acidic, and rich in cysteine) in cataractogenesis by examining mice deficient in a matricellular protein SPARC. METHODS: Mice were rendered SPARC-deficient by a targeted disruption of the gene. Slit-lamp microscopy and histology were used to examine the eyes of SPARC-null and wild-type mice from birth to 14 months of age. RESULTS: SPARC-null mice developed opacities in the posterior cortex of the eye as early as 1.5 months after birth. The diffuse cataracts appeared to progress toward the anterior cortex and reached maturity in many animals by 3.5 months of age. Early stages of cataractogenesis in SPARC-null mice included inhibition of normal lens fiber cell differentiation, degeneration of fiber cells, vacuole formation at the equator, and liquefaction of the cortex. No cataracts were detected in wild-type mice up to the age of 8 months. CONCLUSIONS: The early onset of cataracts in SPARC-null mice establishes that the gene is essential to the maintenance of lens transparency.     

Deciphering the Effect of Lysine Acetylation on the Misfolding and Aggregation of Human Tau Fragment 171IPAKTPPAPK180 Using Molecular Dynamic Simulation and the Markov State Model

The formation of neurofibrillary tangles (NFT) with β-sheet-rich structure caused by abnormal aggregation of misfolded microtubule-associated protein Tau is a hallmark of tauopathies, including Alzheimer’s Disease. It has been reported that acetylation, especially K174 located in the proline-rich region, can largely promote Tau aggregation. So far, the mechanism of the abnormal acetylation of Tau that affects its misfolding and aggregation is still unclear. Therefore, revealing the effect of acetylation on Tau aggregation could help elucidate the pathogenic mechanism of tauopathies. In this study, molecular dynamics simulation combined with multiple computational analytical methods were performed to reveal the effect of K174 acetylation on the spontaneous aggregation of Tau peptide ¹⁷¹IPAKTPPAPK¹⁸⁰, and the dimerization mechanism as an early stage of the spontaneous aggregation was further specifically analyzed by Markov state model (MSM) analysis. The results showed that both the actual acetylation and the mutation mimicking the acetylated state at K174 induced the aggregation of the studied Tau fragment; however, the effect of actual acetylation on the aggregation was more pronounced. In addition, acetylated K174 plays a major contributing role in forming and stabilizing the antiparallel β-sheet dimer by forming several hydrogen bonds and side chain van der Waals interactions with residues I171, P172, A173 and T175 of the corresponding chain. In brief, this study uncovered the underlying mechanism of Tau peptide aggregation in response to the lysine K174 acetylation, which can deepen our understanding on the pathogenesis of tauopathies.     

Effect of sparse long‐chain branching on the step‐strain behavior of a series of well‐defined polyethylenes

The effect of sparse long chain branching, LCB, on the shear step‐strain relaxation modulus is analyzed using a series of eight high‐density polyethylene (HDPE) resins. Strains of 1 to 1250% are imposed on materials with LCB content ranging from zero to 3.33 LCB per 10,000 carbon atoms. All materials are observed to obey time–strain separation beyond some characteristic time, τ_k. The presence of LCB is observed to increase the value of τ_k relative to the linear resin. The behavior of the relaxation modulus at times shorter than τ_k is investigated by an analysis of the enhancement seen in the linear relaxation modulus, G⁰(t), as a function of strain and LCB content. This enhancement is seen to (1) increase with increasing strain in all resins, (2) be significantly larger in the sparsely branched HDPE resins relative to the linear HDPE resin, and (3) increase in magnitude with increasing LCB content. The shape and smoothness of the damping function is also investigated. The finite rise time to impose the desired strain is compared to the Rouse relaxation time of linear HDPE resins studied. Sparse LCB is found to increase the magnitude of the relaxation modulus at short times relative to the linear resin. POLYM. ENG. SCI., 2010. © 2010 Society of Plastics Engineers     

Impact of hydrogen concentrations on the impedance spectroscopic behavior of Pd-sensitized ZnO nanorods

ZnO nanorods were synthesized using a low-cost sol-gel spin coating technique. The synthesized nanorods were consisted of hexagonal phase having c-axis orientation. SEM images reflected perpendicular ZnO nanorods forming bridging network in some areas. The impact of different hydrogen concentrations on the Pd-sensitized ZnO nanorods was investigated using an impedance spectroscopy (IS). The grain boundary resistance (R_gb) significantly contributed to the sensing properties of hydrogen gas. The boundary resistance was decreased from 11.95 to 3.765 kΩ when the hydrogen concentration was increased from 40 to 360 ppm. IS gain curve showed a gain of 6.5 for 360 ppm of hydrogen at room temperature. Nyquist plot showed reduction in real part of impedance at low frequencies on exposure to different concentrations of hydrogen. Circuit equivalency was investigated by placing capacitors and resistors to identify the conduction mechanism according to complex impedance Nyquist plot. Variations in nanorod resistance and capacitance in response to the introduction of various concentrations of hydrogen gas were obtained from the alternating current impedance spectra.     

Biobased adhesives,gums, emulsions,and binders: current trends and future prospects

Biopolymers derived from renewable resources are an emerging class of advanced materials that offer many useful properties for a wide range of food and nonfood applications. Current state of the art in research and development of renewable polymers as adhesives, gums, binders, and emulsions is the subject of this review. Much of the focus will be on major biopolymers such as starch, proteins, lignin, oils, and their derivatives found in both natural and modified forms, but other biopolymers of promising commercial interest will also be included where warranted. Polymers produced in nature are remarkably diverse in their chemistry, thermomechanical properties, rheology, plasticity, and chemical reactivity. In particular, their capacity to undergo a wide array of chemical modifications yields materials with tailored properties suitable for use as adhesives, gums, coatings, emulsions, and binders. Many such materials are now widely used in commercial products like building materials, lubricants, sealants, coatings, bonding aids, pharmaceuticals, paper, glues, flocculants, processed and frozen foods, as well as tissue engineering and bone repair products. This review provides a general overview of biobased polymers highlighting their source, availability, properties, and usage in industrial products along with the future prospects, challenges, and opportunities they offer.