Swelling kinetics,mechanical properties,and release characteristics of chitosan‐based semi‐IPN hydrogels

Two series of pH‐sensitive semi‐interpenetrating network hydrogels (semi‐IPN) based on chitosan (CS) natural polymer and acrylamide (AAm) and/or N‐hydroxymethyl acrylamide (HMA) monomers by varying the monomer and CS ratios were synthesized by free radical chain polymerization. 5‐Fluorouracil (5‐FU), a model anticancer drug, has been added to the feed composition before the polymerization. The characterization of gels indicated that the drug is molecularly dispersed in the polymer matrix. The swelling kinetics of drug‐loaded gels have decreased with increased HMA content at 37°C in both distilled water and buffer solutions with a pH of 2.1 or 7.4. Elastic modulus of the gels increased with the increase in HMA content and higher CS concentration enhanced the elastic modulus positively. Moreover, cumulative release percentages of the gels for 5‐FU were ca. 10% higher in pH 2.1 than those in pH 7.4 media. It was determined that they can be suitable for the use in both gastric and colon environments. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41886.     

Calmodulin and Its Interactive Proteins Participate in Regulating the Explosive Growth of Alexandrium pacificum (Dinoflagellate)

Alexandrium pacificum is a typical dinoflagellate that can cause harmful algal blooms, resulting in negative impacts on ecology and human health. The calcium (Ca²⁺) signal transduction pathway plays an important role in cell proliferation. Calmodulin (CaM) and CaM-related proteins are the main cellular Ca²⁺ sensors, and can act as an intermediate in the Ca²⁺ signal transduction pathway. In this study, the proteins that interacted with CaM of A. pacificum were screened by two-dimensional electrophoresis analysis and far western blots under different growth conditions including lag phase and high phosphorus and manganese induced log phase (HPM). The interactive proteins were then identified using matrix-assisted laser desorption ionization time-of-flight mass spectrometry. Four proteins were identified, including Ca²⁺/CaM-dependent protein kinase, serine/threonine kinase, annexin, and inositol-3-phosphate synthase, which all showed high expression levels under HPM. The gene expression levels encoding these four proteins were also up-regulated under HPM, as revealed by quantitative polymerase chain reaction, suggesting that the identified proteins participate in the Ca²⁺ transport channel and cell cycle regulation to promote cell division. A network of proteins interacting with CaM and their target proteins involved in the regulation of cell proliferation was raised, which provided new insights into the mechanisms behind the explosive growth of A. pacificum.     

Investigation of improved dielectric and thermal properties of ternary nanocomposite PMMA/MXene/ZnO fabricated by in-situ bulk polymerization

Electric power system applications demand for high-temperature dielectric materials. The improved performance of polymer nanocomposites requires improvement in their thermal conductivity & stability, dielectric stability and processing technique. However, they often lose their dielectric properties with a rise in temperature. Here, we offer a solution by incorporating electrically conducting material (MXene) and semiconducting inorganic nanoparticles (ZnO NPs) into an insulating PMMA polymer matrix to maintain high dielectric constant, both at the room and high temperature. Therefore, to achieve desirable thermal and dielectric properties is the main objective of the present study based on the homogeneous distribution of the nanofillers by in-situ bulk polymerization assisted by strong sonication in the corresponding polymer. The introduction of MXene and ZnO NPs into the PMMA not only acquires a substantial increment in the dielectric constant, to attain a value 437, with minimum energy loss of 0.36 at 25 Hz, but also improves the thermal conductivity of PMMA up to 14 times by causing the reduction of thermal resistance, which is actually responsible for the poor thermal conductivity of amorphous pure PMMA polymer. More importantly, hybrid PMMA/4:2 wt% MXene:ZnO nanocomposite leads to an excellent thermal stability. Moreover, further characterization of the synthesized nanocomposites by FTIR, SEM and XRD leads to the evaluation of strong interaction of ternary components with PMMA matrix.     

Drug‐loaded microparticles prepared by the one‐step deposition of calcium carbonate/alginate onto cotton fabrics

Calcium carbonate (CaCO₃)/alginate inorganic–organic hybrid particles were synthesized and deposited on to the surface of cotton fabrics with a novel one‐step procedure. The effects of the Ca²⁺/CO₃^2?/alginate molar ratio on the cotton matrix were investigated. The optimization of the process resulted in a regular shaped hybrid microparticles, and scanning electron microscopy revealed that the particles were uniformly distributed on the surface of the fibers. Dynamic light scattering showed that the particles were about 2 μm in diameter. Moreover, transmission electron microscopy images demonstrated that the core–shell structure of the particles existed along with CaCO₃ evenly enfolded into the alginate layer. An X‐ray diffraction pattern displayed that the alginate/CaCO₃ hybrid microparticles were a mixture of calcite and vaterite crystal. Fourier transform infrared spectroscopy indicated that CaCO₃/alginate hybrid particles formed in situ were the only deposited materials. The thermogravimetric analysis curve indicated a certain mass ratio of the alginate and CaCO₃ in the hybrid particles. Furthermore, the drug‐loading and drug‐release properties of the hybrid microspheres were studied, and the results show that the water‐soluble diclofenac sodium could be effectively loaded in the hybrid microparticles and the drug release could be effectively sustained. Finally, both of the microparticles and modified fabrics had good cytocompatibility. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42618.     

Light microscopy of Pakistani Berberis leaf cuticles and its taxonomic implications

Taxonomy of the genus Berberis is quite complex, due to overlapping morphological characters, making it very difficult to differentiate the species within the genus. In order to resolve this taxonomic complexity, the foliar anatomy of 10 Berberis L. species was carried out, for the first time from Pakistan, using light microscopy (LM). Significant variation in terms of epidermal cells shape, size, cell wall pattern, and stomata type was observed. B. baluchistanica has the largest epidermal cells, Adaxial: length = 45–(53.9 ± 3.6)–62.5 μm; and width = 22.5–(26.3 ± 1.3)–30 μm; Abaxial: length = 37.5–(43.25 ± 2.5)–50 μm; and width = 20–(22.6 ± 0.8)–25. The highest number of stomata was observed in B. glaucocarpa as 62 on the abaxial surface while the lowest number of stomata was recorded in B. baluchistanica as 8 on the adaxial surface. Of 10 investigated species, 6 possess anomocytic type stomata, while 2 species that is, B. aitchisonii and B. parkeriana have both anomocytic and anisocytic stomata while B. baluchistanica and B. calliobotrys have only paracytic type stomata. The highest number of cells per unit area was present on the adaxial surface of B. calliobotrys ranging from 245–(252.4)–260 followed by B. parkeriana with 209–(227.8)–250 on the abaxial surface. Stomatal index (SI) also varied considerably and was the lowest (2.6) percentage in B. baluchistanica and highest (31.9) percentage in B. kunawurensis. A taxonomic key based on micro‐morphological characters is provided for species identification.     

Controlling the particle size of nanobrookite TiO2 thin films

In this study, pure nanobrookite TiO₂ thin films were successfully deposited on glass substrates with the spin-coating method using titanium butoxide and acetic acid. The particle size of TiO₂ films was controlled by the water:AcAc volume ratio. This study shows that it is possible to obtain single oriented pure brookite films. The structural and optical properties of the nanobrookite TiO₂ thin films were characterized by X-ray diffraction (XRD), atomic force microscopy (AFM), ultraviolet-visible spectroscopy (UV-vis), scanning electron microscopy (SEM), spectrophotometer (NKD), and Fourier transform infrared spectrometer (FTIR).     

Reflective light modulator based on epsilon-GaSe crystal

We report the results of investigating a low-voltage, polarization-insensitive, reflective-type modulator based on an epsilon-GaSe crystal and operated at the 1.960-eV line of a He-Ne laser. We demonstrate that the modulation in an Al-epsilon-GaSe-Cu device results mainly from the Franz-Keldysh effect. Relatively high speed and low operating voltage could make these modulators with Schottky-barrier contacts attractive devices in the red range of the spectrum.