An optimum parallel architecture for high-speed real-time digital signal processing

The authors describe a parallel processing architecture for real-time digital signal processing that has demonstrated virtually 100% data processing efficiency in a number of areas. The Teamed-Architecture Signal Processor (T-ASP) is a field-proven, commercially available optimal system solution to the extremely high computational and I/O rates encountered in modern digital-signal-processing environments. The design of T-ASP involves the consideration and implementation of many architectural concepts used to enhance the performance of a computer, including programmability, parallel processing, vector processing and pipelining, memory interleaving, double cache memories, multiple high-speed I/O interfaces, and segmentation of the processors for elimination of both CPU and data-handling overhead. The authors discuss hardware architecture design and implementation; hardware management; and software architecture design and implementation.<>     

Improvements of the T-Ω method for 3-D eddy currentanalysis

An improved T-Ω method that can analyze magnetic fields produced not only by eddy currents but also by magnetizing currents is proposed. The method is applied to the analysis of 3-D eddy-current models with holes. The usefulness of the method is investigated by comparing calculated results with measured results and with results obtained by the A-Φ method. The T-Ω method has the advantage that the CPU time can be considerably reduced when most of the analyzed region is current-free and the eddy current flows two-dimensionally. The method is especially effective when the shape of the winding is simple and the distribution of magnetizing current is known beforehand. It is not effective when most of the analyzed region is current-carrying     

Bioprocess applications of model-based estimation techniques

The last decade has seen the development of a number of approaches for estimating those variables which are difficult to measure on-line in industrial process situations. Whilst a range of techniques is available, a common element is the use of process knowledge in the form of a system model. In the case of bioprocess systems, although a large range of models has been presented in the literature, their use in estimation schemes on an industrial scale has been limited. A number of reasons can be identified for their low level of utilisation. Of particular significance is the uncertainty which exists in quantifying system performance and the process-model mismatch which inevitably results. The level of ‘pre-defined model’ uncertainty, together with the knowledge gained during the course of the fermentation, serves to dictate estimator structure. The paper considers a range of estimation strategies and contrasts, through industrial applications, their performance characteristics and utility.     

The thermal ignition of lignocellulosics in infinite slab and cubic geometries

Wood shaving samples were heated in both cubic baskets and in a previously described system realising the conditions of the ‘infinite slab’ in thermal ignition. Results from the two sets of experiment were found to be totally consistent with each other.     

IMPROVING THE QUALITY OF TIMBER FROM RED BEECH (N. FOSCA) BY INTERMITTENT DRYING

The effect of cycling the external conditions on the timber quality and drying time during seasoning has been studied for red beech (Nothofagus fusca), a difficult-to-dry New Zealand hardwood, inalaboratorybatchdryer. Intermittent drying at anair temperature of 45°C and a wet-bulb depression of 10°C takes longer to yield a given moisture content than continuous drying under the same conditions, but produces timber without honeycomb or severe case-hardening as observed in continuous drying. The experiments also indicate that the timber can tolerate a higher air temperature (55°C) in intermittent drying at the same wet-bulb depression with less case-hardening and without showing honeycomb compared with continuous drying at 45°C, having a similar total drying time. Intermittent drying at a slightly higher dry-bulb temperature (60°C) and a much higher wet-bulb depression (18°C) gives a similar degree of case-hardening to that found in samples dried continuously at a dry-bulb temperature of 45°C.     

Energy dissipation via radiative recombination and vibronic relaxation in σ-delocalized silicon backbone network polymers

The nature of ultrafast energy dissipation in poly(n-hexylsilyne), a prototypical σ-delocalized alkysilicon network polymer, is explored. This disordered silicon backbone material exhibits strong near-UV to visible band-edge absorption and a high quantum yield of visible emission. The time evolution of the emission band is studied over four decades of time using time-resolved luminescence as a probe. The data indicate that while there is an ‘intrinsic’ Stokes shift after photoexcitation due to kinetic energy relaxation (<10ps), thermalization within a dense band of vibronic states via intramolecular phonon-assisted hopping on a nanosecond timescale is the dominant mechanism for excited-state decay. The data can be understood in terms of theoretical predictions for energy relaxation in disordered materials.     

Surface electronic structure of rare earth metals

Angle-resolved UV photoemission has been used to investigate the electronic structure of the (0001) surfaces of scandium, yttrium, praseodymium and gadolinium. Off-normal emission spectra were recorded with high angular resolution, enabling detailed mapping of the dispersion of valence band features. Yttrium and gadolinium show similar results to published data from Ho(0001), suggesting minimal 4f influence in the lanthanide bandstructures. Differences seen on praseodymium and scandium may be due to 4f derived states and surface states respectively.     

Parameters affecting the frequencies of transformation and co-transformation with synthetic oligonucleotides in yeast.

Factors influencing the direct transformation of the yeast Saccharomyces cerevisiae with synthetic oligonucleotides were investigated by selecting for cyc1 transformants that contained at least partially functional iso-1-cytochrome c. Approximately 3 x 10(4) transformants, constituting 0.1% of the cells, were obtained by using 1 mg of oligonucleotide in the reaction mixture. Carrier, such as heterogeneous oligonucleotides, enhanced transformation frequencies. Transformation frequencies were dramatically reduced if the oligonucleotides had a large number of mismatches or had terminally located mismatches. Transformation with oligonucleotides, but not with linearized double-strand plasmid, was efficient in a rad52- strain, suggesting that the pathway for transformation with oligonucleotides is different from that with linearized double-strand plasmid. We describe a procedure of co-transformation with two oligonucleotides, one correcting the cyc1 defect of the target allele in the host strain, and the other producing a desired amino acid alteration elsewhere in the iso-1-cytochrome c molecule; approximately 20% of the transformants obtained by co-transformation contained these desired second alterations.     

Influence of process variables on the drying of potato slices

Investigation of the effects of varying air velocity, slice thickness, and pre-treatment with sodium chloride solutions and surface active agents on drying potato slices indicated that the drying occurred entirely in the falling rate period and was controlled by the mechanism of liquid diffusion. The rate of drying, and therefore the diffusion coefficients, increased with the addition of sodium chloride and surface active agents. Diffusion coefficients were also influenced by air velocity and slice thickness, suggesting that the rate of drying of potato slices is controlled by a combination of internal and external resistances.