Growth and characterization of GaAs films deposited on Ge/Si composite substrates by metalorganic chemical vapor deposition

We report the results of studies which have been made on heteroepitaxial layers of GaAs and AlGaAs grown by metalorganic chemical vapor deposition on composite substrates that consist of four different types of heteroepitaxial layered structures of Ge and Ge-Si grown by molecular beam epitaxy on (100)-oriented Si substrates. It is found that of the four structures studied, the preferred composite substrate is a single layer of Ge ∼1 μm thick grown directly on a Si buffer layer. The double-crystal X-ray rocking curves of 2 μm thick GaAs films grown on such substrates have FWHM values as small as 168 arc sec. Transmission electron micrographs of these Ge/Si composite substrates has shown that the number of dislocations in the Ge heteroepitaxial layer can be greatly reduced by an anneal at about 750° C for 30 min which is simultaneously carried out during the growth of the GaAs layer. The quality of the GaAs layers grown on these composite substrates can be greatly improved by the use of a five-period GaAs-GaAsP strained-layer superlattice (SLS). Using the results of these studies, low-threshold optically pumped AlGaAs-GaAs DH laser structures have been grown by MOCVD on MBE Ge/Si composite substrates.     

A compact full MMIC module for Ku-band phase-lockedoscillators

A compact Ku-band phase-locked oscillator module has been developed in a full MMIC (monolithic microwave integrated circuit) configuration. The module includes an MMIC voltage-controlled oscillator, an analog frequency divider, and interstage amplifiers. The constituent monolithic chips are integrated in a very small single-package module and operate at the target frequencies without any external trimming or matching network. The oscillator is tuned more than 1 GHz with a constant output amplitude. The frequency-divided output is also obtained over the whole tuning range. Spurious output is not found at any frequency up to 22 GHz. In spite of the very low-Q factor of GaAs monolithic circuitry, the oscillator phase noise exhibited is less than -80 dBc/Hz, due to the high-gain, high-speed phase lock     

Studies on curcumin and curcuminoids. VI. Kinetics of curcumin degradation in aqueous solution

The kinetics of the pH-dependent degradation of curcumin has been investigated. A plot of the rate constant against pH indicates the pKa values of the acid protons. The graph also indicates the complexity of the curcumin degradation.     

Influence of the Composition of Potatoes on Their Cooking Kinetics

A previous study of three potato varieties indicated that shear force measurement may be used to predict the behavior of certain potato properties during cooking. To verify this hypothesis and to confirm other previous findings, slices (6 mm thick, 30 mm in diameter) of 21 potato varieties were thermally treated in water at 100°C. Mathematical expressions were assessed, and coefficients were determined to describe the kinetic behavior of the varieties.     

Analytical studies of four-inch pipe whip tests under BWR LOCA conditions

The purpose of pipe rupture studies in JAERI is to perform model tests on pipe whip, restraint behavior, jet impingement and jet thrust force, and to establish a computational method for analyzing these phenomena. This report presents the analytical results of 4-inch pipe whip tests under BWR LOCA conditions.Dynamic response analyses were performed using the general-purpose finite element program ADINA. The test pipe was modelled by straight beam elements and the four restraints were modelled by a single truss element. The analytical results were compared with the experimental results. Impact time and maximum total restraint force showed good agreement with experimental results. On the other hand, pipe strain and pipe deflection could not be predicted so well. The reason for this is that the sliding of the restraint during the pipe whip movement cannot be considered in the analyses.     

Biocides used in building materials and their leaching behavior to sewer systems.

There is increasing concern about diffuse pollution of aquatic systems by biocides used in urban areas. We investigated sources and pathways of biocides significant for the pollution of storm water runoff. Main sources seem to be building envelopes, i.e. facades (paints, plasters) and roof sealing membranes. First results from a defined urban catchment drained by a separated sewer system without any agricultural activities reveal a substantial occurrence. Even after the first flush, concentrations of terbutryn, carbendazim, mecoprop as well as Irgarol 1051 and its metabolite exceeded the Swiss water quality standard of 0.1 microg/L. In laboratory experiments, leaching of mecoprop used as a root protection agent in bitumen sheets for roof waterproofing was determined. The concentrations differed in 16 different sheets two orders of magnitude, depending on the product composition. Using optimized products, it is expected to be the most efficient and sustainable way to reduce the environmental impact. To understand transport dynamics and environmental risk, further storm water events will be analyzed. Based on the ongoing project URBIC, first measures will be proposed to limit the release to surface and ground water.     

Receptor mechanisms of the neonatal intestine and their relationship to immunoglobulin absorption and disease

Immunoglobulin absorption by the calf has been the subject of considerable research. Despite these efforts little is known about the cytological events that occur at the level of the intestinal epithelial cell. These events have been studied extensively and characterized in the laboratory rodent; however, there have been few attempts to make corollaries between the two species. All neonatal animals display certain similarities in their intestinal morphology that may be correlated, with immunoglobulin absorption. Selectivity in absorption appears to be variable among neonatal animal species; however, all demonstrate some selectivity. Selectivity in absorption implies that receptors are a necessary component in the transport of immunoglobulins. Selectivity further requires binding of immunoglobulins to an endocytic vesicle membrane to ensure transport through the cell, circumvention of intracellular digestion, and release at the basolateral cell membrane. A decrease of immunoglobulin absorption may be accomplished in a variety of ways such as competition between intestinal microbes and immunoglobulins for a common receptor on the intestinal epithelial cell. An additional consideration is aberrant synthesis or recycling of the cell membrane receptor, as induced by metabolic decelerators such as cortisol. Failure to recycle immunoglobulin receptors also would decrease efficiency of absorption.     

The impact of multiple failure modes on estimating product field reliability

A difficulty in reliability modeling is how to capture the impact of all of the various reliability defect types. The general approach to optimizing burn-in that we describe in this article addresses a multiple-defect environment. The approach has four main parts: (i) modeling the product's failure rate distribution, (ii) establishing the Pareto distribution of reliability defects, (iii) assessing the kinetic information of each reliability defect, and (iv) estimating the DPPM under product use conditions. This article compares and contrasts the acceleration effects of various extrinsic defects found in 130- and 90-nm CMOS technology products.