平面近场测试系统在天线测试和诊断中的应用

介绍了天线近场测量的基本原理和HD-1型平面近场测试系统,并对近场测量在实际天线测试中的应用情况、发展方向和应用前景等作了简单的描述。     

Incremental transmission loss allocation under pool dispatch

Incremental transmission loss analysis has been used for decades, but recent interest in its application to loss allocation calls for new in-depth results. This paper demonstrates that, for incremental methods to be applied correctly in loss allocation, it is first necessary to specify the load distribution and loss supply strategies. Incremental loss allocation among bus power injections is shown to be arbitrary and, therefore, open to challenge as discriminatory. Loss allocation is possible among incremental loads and/or generators, but the proportion of the total losses assigned to either one is arbitrary. Unique, nonarbitrary incremental loss allocations are however possible among the "equivalent" incremental bilateral exchanges between generators and loads. From these basic components it is possible then to calculate the allocation among generators or loads in any specified proportion. The main results, although developed initially for small increments, are extended to large variations. Finally, a general incremental loss allocation algorithm is developed and tested     

FCC原料掺入裂解焦油的研究及其机理分析

在催化裂化固定流化床小试装置上，对裂化原料中掺入富含芳烃的添加剂－裂解焦油进行了考察，确定了添加剂的最佳掺入量为1％，与不掺添加剂的裂化原料相比，其汽油产率提高，生焦量和干气产率减少，汽油选择性变好。同时通过对添加剂的原料体系的结构研究，对添加剂影响催化裂化过程的机理进行了探讨。     

A Knowledge-Navigation System for Dimensional Metrology

Geometric dimensioning and tolerancing (GD&T) is a method to specify the dimensions and form of a part so that it will meet its design intent. GD&T is difficult to master for two main reasons. First, it is based on complex 3D geometric entities and relationships. Second, the geometry is associated with a large, diverse knowledge base of dimensional metrology with many interconnections. This paper describes an approach to create a dimensional metrology knowledge base that is organized around a set of key concepts and to represent those concepts as virtual objects that can be navigated with interactive, computer visualization techniques to access the associated knowledge. The approach can enable several applications. First is the application to convey the definition and meaning of GD&T over a broad range of tolerance types. Second is the application to provide a visualization of dimensional metrology knowledge within a control hierarchy of the inspection process. Third is the application to show the coverage of interoperability standards to enable industry to make decisions on standards development and harmonization efforts. A prototype system has been implemented to demonstrate the principles involved in the approach.     

Stability analysis of continuous-time periodic systems via theharmonic analysis

Asymptotic stability of finite-dimensional linear continuous-time periodic (FDLCP) systems is studied by harmonic analysis. It is first shown that stability can be examined with what we call the harmonic Lyapunov equation. Another necessary and sufficient stability criterion is developed via this generalized Lyapunov equation, which reduces the stability test into that of an approximate FDLCP model whose transition matrix can be determined explicitly. By extending the Gerschgorin theorem to linear operators on the linear space l₂, yet another disc-group criterion is derived, which is only sufficient. Stability of the lossy Mathieu equation is analyzed as a numerical example to illustrate the results     

The effect of mischmetal addition on the structure and mechanical properties of a cast Al-7Si-0.3Mg alloy containing excess iron (up to 0.6 Pct)

The effect of Fe content (0.2 to 0.6 pct) on the microstructure and mechanical properties of a cast Al-7Si-0.3Mg (LM 25/356) alloy has been investigated. Further, 1 pct mischmetal (MM) additions (a mixture of rare-earth (RE) elements) were made to these alloys, and their mechanical properties at room and at elevated temperatures (up to 200 °C) were evaluated. A structure-property correlation on this alloy was attempted using optical microstructure analysis, fractographs, X-ray diffraction, energy-dispersive analysis of X-rays (EDX), and quantitative metallography by image analysis. An increase in Fe content increased the volume percentage of Fe-bearing intermetallic compounds (β and π phases), contributing to the loweryield strength (YS), ultimate tensile strength (UTS), percentage elongation, and higher hardness. An addition of 1 pct MM to the alloys containing 0.2 and 0.6 pct Fe was found to refine the microstructure; modify the eutectic silicon and La, Ce, and Nd present in the MM; form different intermetallic compounds with Al, Si, Fe, and Mg; and improve the mechanical properties of the alloys both at room and elevated temperatures.     

Equal-channel angular extrusion of beryllium

The equal-channel angular extrusion (ECAE) technique has been applied to a powder metallurgy (P/M) source Be alloy. Extrusions have been successfully completed on Ni-canned billets of Be at approximately 425°C. No cracking was observed in the billets, and significant grain refinement was achieved. In this article, microstructural features and dislocation structures are discussed for a singlepass extrusion, including evidence of <c> and <c+a> dislocations. Significant crystallographic texture developed during ECAE, which is discussed in terms of this unique deformation processing technique and the underlying physical processes which sustain the deformation. S.R. AGNEW, formerly with the Oak Ridge National Laboratory, Oak Ridge, TN 37831-6115 This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

Simulation of magnetic component models in electric circuitsincluding dynamic thermal effects

It is essential in the simulation of power electronics applications to model magnetic components accurately. In addition to modeling the nonlinear hysteresis behavior, eddy currents and winding losses must be included to provide a realistic model. In practice the losses in magnetic components give rise to significant temperature increases which can lead to major changes in the component behavior. In this paper a model of magnetic components is presented which integrates a nonlinear model of hysteresis, electro-magnetic windings and thermal behavior in a single model for use in circuit simulation of power electronics systems. Measurements and simulations are presented which demonstrate the accuracy of the approach for the electrical, magnetic and thermal domains across a variety of operating conditions, including static thermal conditions and dynamic self heating     

Terahertz/optical mixing in symmetric semiconductor quantum wells embedded in optical microcavities

A quantum well (QW) in the simultaneous presence of a terahertz field polarized in the growth direction and an incident optical field near an excitonic resonance results in substantial frequency mixing between the terahertz and optical fields. In particular, a response at new frequencies given by the input optical frequency plus or minus multiples of the terahertz frequency occurs-the terahertz sidebands. In a symmetric QW, the dominant contribution to terahertz-sideband formation is the high-frequency modulation of the overlap integral of the relevant conduction- and valence-subband envelope functions that determine the strength of the interband dipole moment. terahertz-sideband generation is shown to be strongly enhanced in a high quality-factor optical microcavity. Numerical values of the reflected intensity into the first terahertz sideband normalized with respect to the reflected intensity at the fundamental as large as /spl sim/10% are estimated. This suggests that terahertz-sideband generation in semiconductor microcavities is a promising option worthy of exploration for wavelength conversion for wavelength-division multiplexing applications.     

On the interior resonance problem when applying a hybrid FEM/MoMapproach to model printed circuit boards

A hybrid finite element method/method of moments (FEM/MoM) technique is used to analyze a printed circuit board power bus structure where the source and observation points are in the near field. The FEM is used to model the lossy region between the planes of the board including the source. The MoM is used to model the region outside the planes and provide a radiation boundary condition to terminate the FEM mesh. Numerical results for a bridged power bus structure are compared with measurements. A nonphysical interior resonance of the electric field integral equation is observed. The problem can be avoided by using a hybrid technique based on a combined field integral equation