A pore crack model for the mechanical behaviour of porous granular rocks in the brittle deformation regime

A model is developed for predicting and simulating the mechanical behaviour and failure mode of brittle porous granular rocks loaded in compression. It is based on a fracture mechanics analysis applied to cracks emanating from the surface of cylindrical pores in two-dimensional, which is well suited to the microstructure of such rocks. It is also consistent with the usual experimental procedure used for biaxial compression tests since the numerical scheme is implemented under the assumption of imposed axial strain. The model takes into account interactions between neighbouring cracks, which grow when their stress intensity factor reaches the fracture toughness of the rock. The simulation of crack growth from cylindrical holes, associated with a failure criterion based on the coalescence of interacting cracks, allows one to calculate the critical stress at rupture and to derive theoretical stress–strain curves.The present model is then used to compare theoretical results with laboratory data obtained on four sandstones with porosity ranging between 13% and 25.5% which were deformed under conventional triaxial compression conditions at confining pressures between 0 and 35 MPa. The comparison shows that by using a small number of parameters (pore size, pore density, fracture toughness, and elastic moduli), the model is able to predict the rock behaviour during the compression tests and the stress level at rupture in a quite accurate way, when the microstructural parameters introduced are consistent with the observations.     

Blue mountains sewage transfer scheme: a review of tunnelling

To preserve the natural surroundings of the Blue Mountains of New South Wales while simultaneously serving the needs of the region's growing population, the Sydney Water Board has developed an improved, but complex, sewage transfer scheme for the area. This paper traces the development of the scheme, with particular attention to the geology of the area, the equipment used to construct the tunnels for the project, and elements of the directional drilling that connects the sewer areas to the tunnel.     

A portable virus concentrator for testing water in the field

A system is described for concentrating viruses from large volumes of water. The system consists of a water pump, an electric generator, a series of clarifiers, a virus adsorbent, a virus reconcentrator, a 5- and a 1-gal pressure vessel with a small tank of nitrogen as a source of positive pressure, and ancillary equipment, all mounted on 2-wheel carts for easy portability. Standardization of the system was achieved by use of minute amounts of poliovirus. The virus was added to dechlorinated city tap water so that it could not be detected unless the virus was first concentrated. In the system, raw tap water containing virus is serially passed through clarifying filters of porosities of 1–5 μm to remove particulate matter, and then through a 1-μm cotton textile filter to electrostatically remove submicron ferric and other heavy metallic complexes. These filters do not detectably remove virus. Salts are then added to the running tap water to enhance the adsorption of virus to a fibreglass or cellulose acetate filter. Raw water could be processed at the rate of 300 gallons per hour, with total virus removal from the water and with 80 per cent elution of the virus from the adsorbent.     

Lead in glasgow street dirt and soul

The levels of lead in city street dirt and in soil from various locations in Glasgow were investigated during spring 1976. Lead concentrations in street dirt ranged from 150–2300 ppm, mean 960 ppm, and were significantly elevated with respect to the observed “natural” level of 78 ppm. Lead derived from anti-knock compounds in petrol and introduced to the environment via automobile exhausts was clearly implicated as the main source of lead pollution in a series of soil lead measurements at the centre and periphery of eight Glasgow parks.Various chemical leaching techniques were employed and compared. Less than 5% of street dirt and soil lead was found to be associated with the organic phase.     

Cigarette characteristics,smoker characteristics,and the relationship to cigarette fires

Data were collected from eight cities on a wide range of cigarette and smoker characteristics for a sample of smokers. Of these, 564 smokers had had fires and were identified through fire department response to those fires, while the other 1,611 smokers had not had fires and were identified through a telephone sample survey of the communities. The characteristics analyzed included those that had shown evidence of a relationship to the risk of a cigarette-initiated fire, either in laboratory studies or in previous statistical analyses of fire experience.The smoker characteristics analyzed were household income, education, age, gender, and race. The cigarette characteristics analyzed were filter, tobacco column length, filter length, circumference, density, amount of tobacco, menthol, citrate, porosity, and pack type. In addition, a variable was used to control for the smoker's city.After controlling for all smoker characteristics and city, logistic regression modeling showed four cigarette characteristics to be significant: filter, filter length, porosity, and type of pack. Filter, filter length, and porosity all affect air intake, which, therefore, appears to be an important physical element in the combustion process associated with risk. Analysis limited to filtered cigarettes only showed the same characteristics to be significant, plus tobacco column length. Extension of the analysis to two-way interaction terms did not change any of the conclusions on which cigarette characteristics are important, but it did indicate that the role of pack type was different for men and women.Sensitivity analyses, shown in the appendix, supported the main conclusions that cigarette characteristics are significant after controlling for smoker characteristics and that the four specific cigarette characteristics—filter, filter length, porosity, and pack—are the ones that are significant. These analyses checked the impact of cluster sampling, sensitivity to missing data on smoker characteristics, and sensitivity to nonfire smoker cases with responses by people other than the smokers themselves.All this means that there are already cigarettes commercially available that exhibit a reduced propensity for ignition when one controls for smoker characteristics.This report was originally written as the final report in June 1993 as part of CPSC-P-91-1147 Contract Cigarette Fire Incident Study that the National Fire Protection Association conducted for the U.S. Consumer Product Safety Commission.Harwood, formerly with the Consumer Product Safety Commission, is retired.     

Case study of an underground shopping mall in Japan: the east side of Yokohama station

In Japan, development of underground shopping malls beneath the street is controlled by many laws and regulations. Nonetheless, demands for such development nowadays are increasing in densely populated cities because of the advantages, both in terms of economics and the public interest. This case history deals with the construction process and precautionary measures taken against potential disasters in the development of the east side of Yokohama Station.     

Assessment of nitrification in groundwater filters for drinking water production by qPCR and activity measurement

In groundwater treatment for drinking water production, the causes of nitrification problems and the effectiveness of process optimization in rapid sand filters are often not clear. To assess both issues, the performance of a full-scale groundwater filter with nitrification problems and another filter with complete nitrification and pretreatment by subsurface aeration was monitored over nine months. Quantitative real-time polymerase chain reaction (qPCR) targeting the amoA gene of bacteria and archaea and activity measurements of ammonia oxidation were used to regularly evaluate water and filter sand samples. Results demonstrated that subsurface aeration stimulated the growth of ammonia-oxidizing prokaryotes (AOP) in the aquifer. Cell balances, using qPCR counts of AOP for each filter, showed that the inoculated AOP numbers from the aquifer were marginal compared with AOP numbers detected in the filter. Excessive washout of AOP was not observed and did not cause the nitrification problems. Ammonia-oxidizing archaea grew in both filters, but only in low numbers compared to bacteria. The cell-specific nitrification rate in the sand and backwash water samples was high for the subsurface aerated filter, but systematically much lower for the filter with nitrification problems. From this, we conclude that incomplete nitrification was caused by nutrient limitation.     

Analysis and jointing of polygonal road slabs

Conclusions 1. For anlaysis of circular (polygona) slabs which can be included in the category of absolutely rigid slabs, a practical approximate method of analysis has been developed and experimentally verified which permits determining the bending moments under centrally and eccentrically applied loads acting over a small circular area, as well as at any other points in the slab beyond the limits of the loaded area.2. Monolithic bonding of hexagonal road slabs up to 3–4 m² in area designed for the N-30 load results in increased design bending moments and, consequently, in thicker pavements. For these slabs it is expedient to use nonrigid joints, which do not transmit bending or torsional moments; however, these slabs must be placed on stabilized beds and their joints must be filled with waterproofing mastic.Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 5, pp. 19–22, September–October, 1974.     

A new look at compartment fires,part II

This is the second part of a two-part paper in which the author has endeavored to present all available information on compartment fires in a consistent theoretical framework. This well-documented review of the state of the art should serve as a valuable reference for researchers for some time to come. Note: This paper is a contribution from the Division of Building Research, National Research Council of Canada and is published with the approval of the Director of the Division.