Penetrating ocular injuries: an epidemiologic and retrospective study

Penetrating injuries of the eye are an important cause of unilateral visual loss. We studied a series of 82 cases of penetrating injuries treated here from 1987 through 1993. The injuries were caused by sharp objects in 66% and blunt trauma in 6%. The prognosis after a penetrating injury is greatly influenced by the nature of the injury and the extent of the initial drainage. Among factors associated with an unfavorable visual outcome were diminished preoperative visual acuity and scleral wounds with dense vitreous hemorrhage.     

Anatomically constrained electrical impedance tomography forthree-dimensional anisotropic bodies

As shown previously for two-dimensional geometries, anisotropy effects should not be ignored in electrical impedance tomography (EIT) and structural information is important for the reconstruction of anisotropic conductivities. Here, we describe the static reconstruction of an anisotropic conductivity distribution for the more realistic three-dimensional (3-D) case. Boundaries between different conductivity regions are anatomically constrained using magnetic resonance imaging (MRI) data. The values of the conductivities are then determined using gradient-type-algorithms in a nonlinear-indirect approach. At each iteration, the forward problem is solved by the finite element method. The approach is used to reconstruct the 3-D conductivity profile of a canine torso. Both computational performance and simulated reconstruction results are presented together with a detailed study on the sensitivity of the prediction error with respect to different parameters. In particular, the use of an intracavity catheter to better extract interior conductivities is demonstrated     

Radiation and scattering from ferrite-tuned cavity-backed slotantennas: theory and experiment

A three-dimensional finite-element method hybridized with the spectral/spatial domain method of moments is presented for the analysis of ferrite-tuned cavity-backed slot antennas. The cavity, which is partially filled with magnetized ferrite layers, is flush mounted on an infinite ground plane with possible dielectric or magnetic overlay. The antenna operates primarily in the ultrahigh-frequency band. The finite-element method is used to solve for the electric-field distribution inside the cavity, whereas the spectral-domain approach is used to solve for the exterior region. An asymptotic extraction of the exponential behavior of the Green's function followed by a spatial evaluation of the resulting integral is used to improve computational speed. Radar cross section, input impedance, return loss, gain, and efficiency of ferrite-tuned cavity-backed slots (CBS) are calculated for various biasing conditions. Numerical results are compared with experimental data     

Modulation characteristic of waveguide-type optical frequency combgenerator

We report the modulation characteristics of a waveguide-type optical frequency comb generator (WG-OFCG) with the advantages of compactness, high modulation index and low driving power. The characteristics of the optical frequency comb (OFC) generated when the modulation index exceeds 2π are discussed. The power of the modulation sidebands was measured by the optical heterodyne method with an external-cavity laser as a local oscillator. The dependence of the modulation index of the WG-OFCG on the modulation frequency up to 40 GHz was measured. The generation span of the OFC at the modulation frequency detuned from an integer multiple of the free spectral range (FSR) is discussed     

Communication network protocol for real-time distributed controland its LSI implementation

A new token-passing mechanism, priority token passing, which features real-time access and fast detection and recovery of transmission errors, is discussed in detail in comparison with standard token-passing protocols, and its large-scale integration (LSI)-oriented design concept is described. Priority token passing includes only a small performance overhead, due to its switching functions, which can change network topology from ring to broadcast medium. A token-holding node passes the token to another node after determining the successor through priority comparison. Errors occurring during token passing can, thus, be detected and corrected simply and promptly. Priority token passing has a simple hardware implementation, requiring only small additions to the frame control circuitry, and has a small implementation overhead. The priority token-passing protocol and two other important network communication functions, dual ring network reconfiguration and high-level data link control (HDLC) normal response mode-based message transmission, are designed as a single finite-state machine, and implemented into a compact LSI chip. This integrated instrument network (IINET) chip provides complete network communication services and requires only three additional external electronic components for operation     

An empirical study of information technology enabled business process redesign and corporate competitive strategy

Business process redesign (BPR) has been widely touted as a means for leveraging the power of information technology to change business processes radically, resulting in substantial improvements in organizational effectiveness and efficiency. This study represents an early attempt at examining the strategic nature of the phenomenon. Because BPR is radical change and has the ability to alter both the competitive and operational nature of the corporation, it is critical that BPR be coordinated with corporate strategy. Through a survey of information system executives, the relationships between corporate competitive strategy and three types of BPR – intrafunctional, interfunctional and interorganizational – were examined. It was found that organizations following a cost strategy tended to do more BPR projects on interfunctional processes. Furthermore, the positive effect of a cost strategy on interfunctional BPR was found to be strengthened by the degree of integration of IS and business planning. It was also found that while interorganizational BPR was not related to a specific strategy, it was strongly related directly with IS–business planning integration.     

ON THE USE OF BUFFER INVENTORIES TO MINIMIZE COSTS WITH AN UNRELIABLE MACHINE

In this paper, we discuss the problem of quality control with an unreliable machine which produces defects at a rate of Λ₀, per unit when in-control and a rate of Lambda; ₁, when out-of-control (where Λ₁ Λ ₀). Every h time periods, we sample n units, count the number of defects, and (using a process based on a Shewart c-chart) test the hypothesis that the machine is in control by comparing the total number of defects to an upper control limit (UCL). More important, we introduce the concept that a buffer inventory which immediately follows the unreliable machine may reduce expected total costs. This buffer serves to delay the movement of items from the unreliable machine to the next stage of the production process. In this way, we can isolate and repair most defective items before they are embedded in a product downstream or sold to customers where repair is more costly. To search for the optimal control policy, we find bounds for n, h, and UCL; given values for these variables, we show how the optimal buffer size can be determined directly. Numerical results illustrate the magnitude of potential savings.     

Voltage-time characteristics for steep-front impulse voltages ofparticle-contaminated spacers in SF6 gas-insulated switchgear

The voltage-time characteristics of spacer surfaces for steep-front impulse waves are investigated under a particle-contaminated condition in SF₆ gas. The characteristics are measured as a function of particle length, particle position, and space shapes. Flashover voltages monotonically increase in the submicrosecond region as time to flashover is shorter, and are a minimum in the 1 μs region. Applicability of the equal voltage-time area criterion for estimating the voltage-time characteristics is discussed and the estimation is clarified. Moreover, it is demonstrated that an optimized spacer with ribs greatly improves flashover voltages in the submicrosecond region as well as in the 1 μs and power frequency region     

The greenhouse effect; Impact upon and the role to be played by construction

The authors highlight several possible ways in which the construction industry could lower present emissions of the greenhouse gas, carbon dioxide. It is an excellent discussion document and is recommended reading.