Effects of 4He impurities on 3He nuclear spin-lattice relaxation in hcp solid 3He

Nuclear spin-lattice relaxation properties of hcp solid ³He with ⁴He impurities have been studied. At temperatures below the exchange plateau region, three kinds of relaxation time were observed. To analyze the data, a phenomenological four-bath model was developed, the four baths being the Zeeman bath, the phonon bath, an X-bath, and a Y-bath. The X-bath consists of the exchange bath and a part of the ⁴He-⁴He elastic interaction bath. The Y-bath is the main part of the elastic interaction bath. We measured the concentration dependence of the energy constants of all the baths, as well as the temperature and concentration dependences of the three kinds of relaxation time. The relaxation behavior corresponding to the process between the X-bath and the Y-bath could not be expressed by a single exponential function of time and the relaxation rate was strongly dependent on the concentration. This process may be related to the internal thermal equilibrium process within the elastic interaction bath. The impurity-dependent relaxation time between the X-bath and the phonon bath had a temperature dependence of T ^–n with n = 7.4±0.3.     

Dynamic alternation of primate response properties during trial-and-error knowledge updating

Humans and animals seek appropriate solutions to novel problems through trial-and-error (TE) actions and observation of their outcomes. Once an individual has obtained the knowledge (rule) to solve a problem, knowledge-based (KB) actions may be applied in a stereotypical manner. Solutions can thus be based on TE or KB actions. To characterize this learning process at the behavioral level, we developed a new cognitive task for a laboratory monkey (Macaca fuscata) to perform. In this task, a search array consisting of six elements of different colors was presented, one of which was the behaviorally relevant target. The target color was changed unpredictably with no instruction or signal, requiring the monkey to use a TE search strategy to find the target color. We found that once the monkey identified the relevant color by chance after a color change, correct performance increased in a step-like manner and at the same time, other response properties (reaction time and color-choice tendency) also changed discontinuously. These step-like alternations in behavioral performance may be attributed to the subject’s switching between TE and KB search strategies in the two phases. The present study has therefore provided behavioral evidence for the timing and manner of switching between search strategies during the process of updating knowledge.     

Analysis of accelerated creep under constant sustaining load for austenitic stainless steels

The effect of stress on creep rate of austenitic stainless steels of type 347 and 316 was studied by applying the differential test technique. It was found that the creep rate could be expressed as follows, whereB ₁ is a material constant depending on temperature,a ₁ anda _o are constants, and σ is the real stress. Considering the increase in real stress during creep process due to void formation and to the decrease in cross sectional area of the specimen, integrating the above equation yields the following creep curve, 1 $$ \in = \in _m + \frac{1}{{n_o \left( {c_o + 1} \right)}}ln\frac{1}{{1 - n_o \left( {c_o + 1} \right) \in _m (t - t_{_m } )}}$$ where ∈ is the creep strain at a given time (t), ∈_m is the minimum creep rate, ∈_m andt _m are the strain and time, respectively, at the minimum creep rate,n _o is a constant, andc _o is the material constant relating to the void formation. This equation agrees very well with the experimental creep curve.     

Fabrication of particle-free thin films by laser ablation combined with an electron beam

Particle-free silicon and nickel thin films were successfully fabricated by laser-ablating a melted section of their target surface, which gives a high evaporation pressure at the melting point. The influence of direct evaporation from a melted target was reduced negligibly by melting the target only locally with a focused electron beam (e-beam) and increasing the laser frequency. The silicon films fabricated by the present method, pulse laser deposition of a partially molten target, were able to firmly adhere to the substrates and withstood steel needle scratching, unlike e-beam-evaporated films.     

Thermal buckling of cross-ply laminated composite and sandwich plates according to a global higher-order deformation theory

A two-dimensional global higher-order deformation theory is presented for thermal buckling of cross-ply laminated composite and sandwich plates. By using the method of power series expansion of continuous displacement components, a set of fundamental governing equations which can take into account the effects of both transverse shear and normal stresses is derived through the principle of virtual work. Several sets of truncated Mth-order approximate theories are applied to solve the eigenvalue problems of a simply supported multilayered plate. Modal transverse shear and normal stresses can be calculated by integrating the three-dimensional equations of equilibrium in the thickness direction, and satisfying the continuity conditions at the interface between layers and stress boundary conditions at the external surfaces. Numerical results are compared with those of the published three-dimensional layerwise theory in which both in-plane and normal displacements are assumed to be C⁰ continuous in the continuity conditions at the interface between layers. Effects of the difference of displacement continuity conditions between the three-dimensional layerwise theory and the global higher-order theory are clarified in thermal buckling problems of multilayered composite plates.     

A rate-dependent cohesive model for simulating dynamic crack propagation in brittle materials

Numerical investigations are conducted to simulate high-speed crack propagation in pre-strained PMMA plates. In the simulations, the dynamic material separation is explicitly modeled by cohesive elements incorporating an initially rigid, linear-decaying cohesive law. Initial attempts using a rate-independent cohesive law failed to reproduce available experimental results as numerical crack velocities consistently overestimate experimental observations. As proof of concept, a phenomenological rate-dependent cohesive law, which bases itself on the physics of microcracking, is introduced to modulate the cohesive law with the macroscopic crack velocity. We then generalize this phenomenological approach by establishing a rate-dependent cohesive law, which relates the traction to the effective displacement and rate of change of effective displacement. It is shown that this new model produces numerical results in good agreement with experimental data. The analysis demonstrates that the simulation of high-speed crack propagation in brittle structures necessitates the use of rate-dependent cohesive models, which account for the complicated rate-process of dynamic fracture at the propagating crack tip.     

Comparisons of optimal release policies for software systems

In a software product management, it is an important problem to determine the optimal release timing which minimizes the total expected cost incurred in both testing and operation phases. In this paper, we compare the performance between two kinds of software release methods, which are referred to as the T-policy and the N-policy. Based on the existing software reliability growth models, we formulate the expected cost functions and derive analytically the optimal policies under these control methods. Also, we derive a criterion for which control methods should be adopted. Finally, in numerical examples, we calculate the optimal release policies for several cost parameters.     

Parallel processing circuit of line image using neuristor

A simultaneous detecting circuit system of centers and lengths of some lines in one dimension is presented applying an electronic circuit model of the nervous axon with respect to signal transmission. This model consists of series of one basic section, and has functions of Neuristor. The circuit system has a paralell processing function. It is constructed by three layers. In the first layer each visual signal of lines is changed to electric pulse signal. In the second layer edges of each line are detected, and in the third layer these detected signals are converted into voltages which correspond to lengths of the lines. These functions were confirmed experimentally using its hardware.     

Fabrication and characterization of potassium-sodium niobate piezoelectric ceramics by spark-plasma-sintering method

High density (Na_1−xK_x)NbO₃ (x = 0.5, 0.6, and 0.7) ceramics were successfully prepared by spark-plasma-sintering (SPS) method. The dielectric and piezoelectric properties of the SPS samples were investigated and compared to that of hot-pressed samples. It is found that, the SPS-sintered (Na_1−xK_x)NbO₃ samples show higher room temperature dielectric constant, higher coercive fields, lower remnant polarizations and lower electromechanical coefficients than that of the hot-pressed (Na_1−xK_x)NbO₃ samples. The dielectric and piezoelectric property differences between the SPS-sintered and hot-pressed samples have been attributed to grain size effects.     

Electrochemical behaviors of uranium and plutonium at simultaneous recoveries into liquid cadmium cathodes

Experiments were conducted on simultaneous recovery of uranium and plutonium electrochemically into laboratory scale liquid cadmium cathodes (LCCs) at different U/Pu ratios in the salt phase, and the influence of the salt composition on the recovered amounts of uranium and plutonium, the morphologies of uranium and plutonium in the LCC, and the behavior of americium, which is present as a decay product of plutonium-241, were examined. As a result, it was shown that there is a threshold in the U/Pu ratio in the salt phase between 1/4.3 and 1/1.73 for the successful simultaneous recovery of uranium and plutonium up to 10 wt% in the LCC at high current efficiencies. In the LCC, uranium and plutonium existed in the forms of intermetallic compounds, (U, Pu)Cd₆ and (U, Pu)Cd₁₁, and also pure uranium metal. It was also revealed that americium associates with plutonium according to the separation factor during the LCC operation.