Macrophage Activation Markers Predict Liver-Related Complications in Primary Biliary Cholangitis

Primary biliary cholangitis (PBC) has a wide variation in clinical presentation and course. There is no significant correlation between these symptoms and the disease stage, although patients with more advanced stages generally have more symptoms. It is important to develop biomarkers in order to identify patients with an increased risk of complications and end-stage liver disease. This study investigated surrogate markers for risk estimation of PBC-related complications, including a study population of 77 patients with PBC who underwent liver biopsy and were measured for serum levels of macrophage activation markers, soluble CD163 (sCD163), soluble mannose receptor (sMR), and zonulin. Patients with PBC were divided into symptomatic (Group S, n = 20) and asymptomatic (Group A, n = 57) groups. The correlations of histological stages based on both Scheuer and Nakanuma classifications with the three serum markers were investigated. The Nakanuma classification involves grading for liver fibrosis and bile duct loss. The three biomarkers were assessed for their diagnostic ability to identify patients with PBC having high risk of developing complications. The predictive factors of these complications were examined as well. Group S had significantly higher serum sMR (p = 0.011) and sCD163 (p = 0.048) levels versus Group A. A composite index of sMR and sCD163 measurements had significantly better prediction performance than sCD163 alone (p = 0.012), although not when compared to sMR alone (p = 0.129). Serum sMR was an independent factor for developing complications on both univariate (Odds ratio (OR) = 30.20, 95% confidence interval (95% CI): 3.410–267.0, p = 0.00220), and multivariate (OR = 33.70, 95% CI: 3.6600–311.0, p = 0.0019) analyses. Patients with PBC having sMR of ≥56.6 had a higher incidence of clinical complications versus those with a sMR of <56.6. Serum sMR predicts the development of complications in patients with PBC. sMR plus sCD163 showed better predictive power than either marker alone, although the addition of sCD163 did not improve the predictive power of sMR. Future prospective studies are required in order to validate the findings of the present study.     

A quick and simple method for the identification of meat species and meat products by PCR assay

The polymerase chain reaction (PCR) was applied to identify six meats (cattle, pig, chicken, sheep, goat and horse) as raw materials for products. By mixing seven primers in appropriate ratios, species-specific DNA fragments could be identified by only one multiplex PCR. A forward primer was designed on a conserved DNA sequence in the mitochondrial cytochrome b gene, and reverse primers on species-specific DNA sequences for each species. PCR primers were designed to give different length fragments from the six meats. The products showed species-specific DNA fragments of 157, 227, 274, 331, 398 and 439 bp from goat, chicken, cattle, sheep, pig and horse meats, respectively. Identification is possible by electrophoresis of PCR products. Cattle, pig, chicken, sheep and goat fragments were amplified from cooked meat heated at 100 or 120°C for 30 min, but horse DNA fragments could not be detected from the 120°C sample. Detection limits of the DNA samples were 0.25 ng for all meats.     

Pressure Rise and Propagation Phenomena Due to Fault Arc in Container with Opened Pipe

This paper describes experimental and analytic studies on pressure rise and propagation phenomena due to high current arcs in a container with opened pipes. The shape of the experimental container was chosen taking into account underground common ducts. First, arcs were ignited in the container with varying diameter D and length L of the opened pipes and at arc currents of 4 kA to 12.5 kA and an arc duration of 0.1 s. Based on measured waveforms, the maximum pressure rise and the pressure oscillation frequency were obtained. It was found that there is a tendency for to increase with decreasing D and increasing L, and that D has a much greater impact on . In addition, the tendencies of with changing D and L can be approximately explained by Helmholtz resonance. Second, a CFD model for the container with opened pipe was developed based on the experimental results, and simulations were performed. The simulation results were found to correspond to the experimental pressure rise.     

Structure,transport properties,and dielectric properties of lactic acid/pyruvic acid aqueous solution in a biofuel cell: A molecular simulation study

Molecular dynamics (MD) simulation of lactic acid (L‐acid) and pyruvic acid (P‐acid) in a physiological salt solution has been performed, which is used as the electrolyte in a sort of biofuel cell working on a human skin. The structure, frequency distribution of molecules, dielectric properties, rotational correlation functions, and diffusion coefficients have been calculated. The anomalous behavior of dielectric constants for the lower concentration of L‐acid and P‐acid has been obtained from MD. The anomalous dielectric constant is discussed in relation with the various physical properties of the solution including the life time of the interaction in the solution. MD results suggest that the anomalous behavior is supposed to be attributed to the difference of interactions between ions in the lower and higher concentration region. POLYM. ENG. SCI., 59:2474–2478, 2019. © 2019 Society of Plastics Engineers     

Grain Refinement by Cyclic Displacive Forward/Reverse Transformation in Fe-High-Ni Alloys

A novel method for grain refinement of martensite structures was proposed, in which transformation strain is accumulated by cyclic displacive forward and reverse transformations. This method can refine martensite structures in an Fe-18Ni alloy because a high density of austenite dislocations is introduced by a displacive reverse transformation in addition to an inheritance of dislocations in body-centered cubic martensite into austenite during cyclic transformation. The addition of a small amount of carbon accelerates structure refinement significantly, which results in the formation of ultra-fine-grained structures after ten cycles.

     

Fabrication of BSCF-based mixed oxide ionic-electronic conducting multi-layered membrane by sequential electrophoretic deposition process

The Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ (BSCF)-based multi-layered oxygen separation membrane was fabricated by the sequential electrophoretic deposition (EPD) process. A thin porous/dense bi-layer of BSCF was formed on a thick porous support of BSCF. The porous support prepared by a sacrificial template method using BSCF powder mixed with wheat starch (30 wt%) as a pore-forming agent, followed by uniaxial pressing and low-temperature sintering, was directly used as an EPD electrode. A thin BSCF layer was first formed on the porous support, and then a thin BSCF + PMMA (polymethyl methacrylate) layer was sequentially formed on the thin BSCF layer using a bimodal suspension of BSCF and PMMA. A 30-μm thin porous/dense bi-layer of BSCF of which the total thickness was obtained by optimizing the processes of EPD and subsequent co-sintering. The oxygen separation performance of 3.7 ml (STP) min^?1 cm^?2 at 860 °C was achieved for the BSCF-based multi-layered oxygen separation membrane.     

Strength of spline joints assembled by forming

In this paper, a new assembling method of spline joints that enables tight fitting in a simple manner by allowing slight plastic deformation at the spline teeth was introduced. Experiments were carried out for the spline joints of medium carbon steel varying the overlap zone between the male and the female spline teeth. Axial joining strength was increased with increase in the overlap length due to the residual compressive stress by forming. The joint by the proposed method also showed higher torsional strength than the conventional joint. Improvement in the torsional strength was explained based on the deformation and hardness distribution around the spline teeth. With respect to the shape of overlap zone, better results were obtained when using the specimen having a uniform overlap length along the axial direction.     

Effect of friction stir processing on microstructure of laser clad cobalt-based alloy

(The microstructural refinement of cobalt-based alloy (Stellite No. 6) by laser cladding and friction stir processing (FSP) was studied. A nanometer-sized microstructure consisting of fine carbide (particle size: 100–200 nm) and a grain (grain size: 150–250 nm) was successfully fabricated by the FSP on the laser clad cobalt-based alloy. The nanostructured cobalt-based alloy (Stellite No. 6) had an extremely high hardness of about 750 HV.     

Selection of injection conditions for aluminum particles as a raw material by numerical analysis in the synthesis of ultrafine particles with transferred type arc plasma

We investigated by numerical analysis the dependence of vaporization behavior of aluminum particles injected into transferred type arc plasma on injection conditions in synthesis of aluminum nitride ultra fine particles. On the basis of calculation results, we chose one proper injection condition where aluminum particles vaporized more. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 170(2): 46–52, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20852