Studies on synthesis and permeability of special polymer membranes

Summary The permeation characteristics of polymer blend membranes from poly(vinylidene fluoride) and poly-(ethylene glycol) to aqueous polymer solution were investigated under carefully controlled conditions. The permeation characteristics were influenced significantly by the blend ratio, the temperature and time of heat treatment, which changed the structure of the resulting membranes.     

Effect of temperature on the stereoselectivity of phospholipase D toward glycerol in the transphosphatidylation of phosphatidylcholine to phosphatidylglycerol

In this study, the effect of temperature on the stereoselectivity of phospholipase D (PLD) toward the two primary hydroxyl groups of glycerol in the transphosphatidylation reaction of phosphatidylcholine to phosphatidylglycerol (PtdGro) was investigated. For this purpose, PLD from bacteria (Streptomyces septatus TH-2, S. halstedii subsp. scabies K6, and Actinomadura sp.) and cabbage were tested. At the reaction temperatures employed (0–60°C), the proportions of the two PtdGro diastereomers, namely, 1,2-dioleoyl-sn-glycero-3-phospho-3′-sn-glycerol (R,R configuration) and 1,2-dioleoyl-sn-glycero-3-phosphol-1′-sn-glycerol (R,S configuration), which were produced with PLD from Streptomyces TH-2 and Actinomadura sp., changed gradually from 50% R,R and 50% R,S at 50–60°C to 70% R,R and 30% R,S at O°C. These alterations suggested that the stereoselectivity of the bacterial PLD toward the two primary hydroxyl groups of prochiral glycerol was significantly influenced by reaction temperature. PLD from Streptomyces K6 showed relatively little effect of temperature on stereoselectivity, giving 65–69% R,R in the temperature range of 60–10°C examined. The plots of In ([R,R]/[R,S]) vs. 1/T gave good linear fits for these three bacterial PLD. No temperature effect was observed for cabbage PLD, which gave an almost equimolar mixture of the R,R and R,S diastereomers in the range from 0 to 40°C. The temperature-dependent change in enantiomeric selectivity of the bacterial PLD promises potentially profitable commercial exploitation.     

Observation of polarization property in near-field optical imaging by a polarization-maintaining fiber probe

We fabricated an original near-field scanning optical microscopy (NSOM) fiber probe made of polarization-maintaining and attenuation-reducing (PANDA)-type polarization-maintaining optical fiber, and observed the polarization property of propagation light in a polymer optical waveguide. The distribution of the transmission coefficient in polarization angles through this NSOM probe showed that the linear polarization is maintained in the two crossing directions: the fast and slow axes. The polarization degree parallel to the slow axis decreases from 1000:1 to 2:1 by bending the fiber probe and the decrease is independent of the bending direction. Using this PANDA-type NSOM probe, we investigated the polarization property of periodic intensity modulation. It was found that the intensity modulation was observed clearly with the electric vector parallel to the radius direction of the waveguide, but was observed vaguely with the electric vector perpendicular to the radius direction.     

Characterization of polymer-adhesive interfaces on a nanometre scale by elemental mapping and image EELS using EFTEM

Energy-filtering transmission electron microscopy (EFTEM) was applied for investigating interfaces between a polymer and an adhesive. The sample employed in this work is polybutylene terephtharate (PBT) sheets laminated with an epoxy adhesive. It was found that heat aging of the PBT at 180 degrees C in air for > 9 h prior to adhesion decreases the adhesion strength drastically. To investigate this unfavourable aging effect on the adhesion strength, we performed elemental mapping and image EELS using EFTEM. A weak boundary layer with a thickness of < 50 nm was visualized at the PBT-adhesive interface by elemental mapping in the sample subjected to the heat aging and image EELS revealed the origin of this layer. Thus, we clearly correlated the nanoscale interfacial structure with the adhesion strength by EFTEM.     

Chemiluminescence detection for a microchip capillary electrophoresis system fabricated in poly(dimethylsiloxane)

Chemiluminescence (CL) detection integrated with a microchip capillary electrophoresis (MCE) system that was fabricated in poly(dimethylsiloxane) was demonstrated for chemical and biochemical analyses. Two model CL systems were involved here: metal ion-catalyzed luminol-peroxide reaction and dansyl species conjugated peroxalate-peroxide reaction. Different strategies based on three chip patterns (cross, cross combining with Y, and cross combining with V) to perform on-line CL detection for MCE were evaluated and compared in terms of sensitivity, reproducibility, and peak symmetry. The chip pattern of cross combining with Y proved to be promising for the luminol-peroxide CL system, while the chip pattern of cross combining with V was preferred for the peroxalate-peroxide system where CL reagent could not be effectively transported by electroosmotic flow. A detection limit down to submicromolar concentrations (midattomole) was achieved with good reproducibility and symmetric peak shape. Successful separation of three metal cations such as Cr(III), Co(II), and Cu(II) and chiral recognition of dansyl phenylalanine enantiomers within 1 min revealed distinct advantages of combining MCE with CL detection for rapid and sensitive analyses.     

Piezoelectric properties in (K0.5Bi0.5)TiO3-(Na0.5Bi0.5)TiO3-BaTiO3 lead-free ceramics.

Lead-free piezoelectric ceramics with compositions around the morphotropic phase boundary (MPB) x(Na0.5Bi0.5)TiO3-y(K0.5Bi0.5)TiO3-zBaTiO3 [x + y + z = 1; y:z = 2:1] were synthesized using conventional, solid-state processing. Dielectric maximum temperatures of 280 degrees C and 262 degrees C were found for tetragonal 0.79(Na0.5Bi0.5)TiO3-0.14(K0.5Bi0.5)TiO3-0.07BaTiO3 (BNBK79) and MPB composition 0.88(Na0.5Bi0.5)TiO3-0.08(K0.5Bi0.5)TiO3-0.04BaTiO3 (BNBK88), with depolarization temperatures of 224 degrees C and 162 degrees C, respectively. Piezoelectric coefficients d33 were found to be 135 pC/N and 170 pC/N for BNBK79 and BNBK88, and the piezoelectric d31 was determined to be -37 pC/N and -51 pC/N, demonstrating strong anisotropy. Coercive field values were found to be 37 kV/cm and 29 kV/cm for BNBK79 and BNBK88, respectively. The remanent polarization of BNBK88 (approximately 40 microC/cm2) was larger than that of BNBK79 (approximately 29 microC/cm2). The piezoelectric, electromechanical, and high-field strain behaviors also were studied as a function of temperature and discussed.     

Phase-transition temperatures and piezoelectric properties of (Bi1/2Na1/2)TiO3-(Bi1/2Li1/2)TiO3-(Bi1/2K1/2)TiO3 lead-free ferroelectric ceramics.

The phase-transition temperatures and piezoelectric properties of x(Bi(1/2)Na(1/2))TiO3-y(Bi(1/2)Li(1/2))TiO3-z(Bi(1/2)K(1/2))TiO3 [x + y + z = 1] (abbreviated as BNLKT100(y)-100(z)) ceramics were investigated. These ceramics were prepared using a conventional ceramic fabrication process. The phase-transition temperatures such as depolarization temperatures T(d), rhombohedraltetragonal phase transition temperature T(R-T), and dielectric-maximum temperature T(m) were determined using electrical measurements such as dielectric and piezoelectric properties. The X-ray powder diffraction patterns of BNLKT100(y)-100(z)) show the morphotropic phase boundary (MPB) between rhombohedral and tetragonal at approximately z = 0.20, and the piezoelectric properties show the maximum at the MPB. The electromechanical coupling factor k(33), piezoelectric constant d(33) and T(d) of BNLKT4-20 and BNLKT8-20 were 0.603, 176 pC/N, and 171 degrees C, and 0.590, 190 pC/N, and 115 degrees C, respectively. In addition, the relationship between d33 and Td of tetragonal side and rhombohedral side for BNLKT4-100z and BNLKT8-100z were presented. Considering both high Td and high d(33), the tetragonal side of BNLKT4-100z is thought to be the superior composition. The d(33) and T(d) of BNLKT4-28 were 135 pC/N and 218 degrees C, respectively. Moreover, this study revealed that the variation of T(d) is related to the variation of lattice distortion such as rhombohedrality 90-alpha and tetragonality c/a.     

Occupational posture exposure among construction electricians

The aim of this study is to record, objectively describe and compare working postures of Brazilian and Norwegian construction electricians. Postures of the upper arms, head, and neck during work and breaks were quantified by means of inclinometry for a representative sample of 12 Brazilian and 12 Norwegian electricians in the construction industry during a full work-shift. Despite that differences were found between specific work-related factors, Brazilian and Norwegian workers revealed a high and very similar level and pattern of postures for all evaluated body regions, suggesting that results could be extrapolated to other electricians. Upper arm elevation was high and similar for both groups and head flexion and extension was pronounced compared to other occupations. Thus, extreme postures were identified for construction electricians in both countries, with similar exposure pattern also for defined tasks (planning, support and wiredraw), suggesting that this job is risky regardless organizational differences.     

Design of sampled-data critical control systems based on the fast-discretization technique

The fast-discretization is known as an approximate but efficient technique for design and analysis of sampled-data systems. In this paper, we propose a fast-discretization-based design for sampled-data critical control systems. Supposing a tracking problem or a slow-changing disturbance rejection problem, we assume that an exogenous input is a persistent and/or transient input with bound on the rate of change. It is shown that the critical constraint for such exogenous inputs can be given in the form of the inequality constraint on the unit step response. The design parameters are determined by a numerical search method subject to this constraint. However, instead of evaluating it strictly, we check the corresponding constraint which is obtained from the fast-discretized system. Although this approach is approximate, it provides an efficient numerical procedure for a computer-aided design. To show the validity of the proposed method, an example of a multi-objective critical control system design is presented.