Bonelike Hydroxyapatite Induction by a Gel-Derived Titania on a Titanium Substrate

Gel-derived titania coating on commercial pure (c.p.) titanium induces hydroxyapatite formation onto its surface from a simulated body fluid (SBF, a metastable calcium phosphate solution). The induced apatite is similar to bone apatite in that it is poorly crystallized, calcium-deficient, and carbonate-containing. Furthermore, the carbonate (CO^2–3) groups go into the apatite lattice and lie at the positions of PO^3–4 and OH^– to replace these ionic groups, resembling the (CO^2–3) groups of bone apatite. Therefore, the apatite induced by the gel-derived titania is said to be bonelike. A chemical stimulation, stemming from abundant hydroxyl groups and negative charges at the surface of the titania gel, is believed to be responsible for the bonelike apatite induction. The potential of bone-bonding is predicted for the gel-derived titania, for it is an efficient bonelike apatite inducer in the SBF.     

Studies on syntheses and permeabilities of special polymer membranes

Summary The permeation and separation characteristics of methanol/n-pentanol systems and n-propanol/n-heptane systems through nylon 12 membranes were studied by changing the feed composition of the binary organic mixtures. These characteristics were discussed from the viewpoints of physical and chemical nature of the permeating molecules and the membrane.     

Isotachophoretic analysis of surfactants

The qualitative and quantitative determination of anionic surfactants (sodium and lithium alkylsulfate, sodium dodecylbenzenesulfonate, sodium di-2-ethylhexyl sulfosuccinate, sodium and lithium perfluoroalkylcarboxylate, and lithium perfluorooctanesulfonate) were investigated by a capillary tube isotachophoresis using a potential gradient detector. The leading electrolyte solution was the mixture of acetonitrile and aqueous solution of histidine buffer containing calcium chloride. The terminating electrolyte solution was the aqueous solution of sodium octanoate. These electrolytes were effective for the analysis of the mixtures of strongly acidic surfactants.     

Kinetic study on the first stage during thermal degradation of polystyrene

The kinetic parameters of the first stage of polystyrene degradation have been investigated to elucidate the reaction mechanisms using the flow reactor system. The decrease in molecular weight of polystyrene was recorded at minute intervals over the temperature range 310°–390°C. Generally, the first and second stages were observed by thermogravimetric analysis (t.g.a.), however in the early stage of the degradation volatile yields of at least 5% occurred. Therefore, using t.g.a. analysis it is difficult to detect this earlier stage. It became evident that the first stage in the earlier part of the reaction could be detected by g.p.c. analysis. We have observed the hidden kinetic parameters of the nature of the first stage of the polystyrene degradation. The results indicate that the main chains were degraded randomly with the small quantitative volatile groups in the first stage and the rates of decrease in molecular weight in the first stage against reaction temperatures were evaluated as log k_s = 12.0 ? 41300/RT.     

High-Resolution Electron Microscopy Observations of Stacking Faults in β-SiC

Structural images of the stacking faults in β-SiC were obtained with a high-resolution electron microscope. Stacking faults initially present in β-SiC powder particles were eliminated as grain growth proceeded at elevated temperatures.     

Development of AAS resin by the emulsion–suspension polymerization method

In order to improve the weatherability of acryonitrile—styrene—butadiene rubber graft polymer (ABS resin), an attempt was made to develop a resin (AAS resin) in which acrylic rubber of good weatherability was used instead of butadiene rubber. First, by copolymerizing dicyclopentenyl-methacrylate (DCP-MA,3%) with butyl acrylate, crosslinked acrylic rubber was obtained. This also introduced grafting sites into the rubber. Next, methods of graft copolymerizing styrene and acrylonitrile with this rubber were examined. An emulsion–suspension polymerization method was developed in which the initial stage of the polymerization, emulsion polymerization, changed into suspension polymerization during the process. By this method of polymerization, rubber particles were combined and enlarged, bringing about a graft-type resin with high impact resistance. This polymerization method is industrially useful because particle-shaped resins are obtained without the need of a salting-out process. The AAS resin, obtained in this way, has much improved weatherability over ABS resin and shows strength equal to that of ABS resin. © 1992 John Wiley & Sons, Inc.     

Lysozyme requires fluctuation of the active site for the manifestation of activity

Mutations around His15 which lie far away from the active site,stimulated glycol chitin activity of lysozyme at physiologicaltemperature. Del-Argl4Hisl5 lysozyme, a mutant lysozyme whoseArgl4 and Hisl5 were deleted together, and has the highest activityamong these mutant lysozymes, had a similar binding abilityto a trimer of N-acetyl-glucosamine, a substrate analogue, relativeto native lysozyme. This suggests that the increased activitywas due to an increased k_cat in the catalysis reaction. TheH-D exchange rate of the N-1 proton in the Trp63 which is locatedin the active site cleft, was enhanced in the Del-Argl4Hisl5lysozyme, while 2-D proton NMR analysis revealed no conformationalchange around Trp63. We conclude that some sort of fluctuationat the active site might be required for the manifestation ofactivity. This theory is supported by the finding that the Del-Argl4Hisl5lysozyme showed a shift in temperature dependency of activityto lower temperatures compared with that of native lysozyme.     

pH-controlled uphill transport of ammonium ions through polymer membranes with sulfonic acid groups

Uphill transport of ammonium ions through a membrane with sulfonic acid groups were investigated with pH-controllers which keep the solution at a constant pH. A membrane with sulfonic acid groups was prepared by casting an aqueous solution containing poly(styrenesulfonic acid) and poly(vinyl alcohol) on a glass plate. When a membrane with one side alkaline and the other acidic was fixed as a diaphragm in a cell, ammonium ions were transported from the alkaline side to the acidic side through the membrane against the concentration gradient of the adjacent solutions. Uphill transport of ammonium ions with pH-controllers was more efficient than without, thus keeping the pH difference between both sides of the membrane constant, which is a driving force for the uphill transport. Furthermore, the effect of pH of the acidic side on the uphill transport was investigated and the mechanism of the pH-controlled uphill transport is discussed.     

Studies on syntheses and permeabilities of special polymer membranes

Summary The permeabilities of various cellulose ester membranes and cellulose membranes were investigated using pure water and aqueous solution of glycerol as feed. In all membranes, the permeation rate for aqueous solution of glycerol was greater than for pure water. The permeation rates of cellulose ester membranes increased with an increase in number of carbon atoms of the substituent group in cellulose ester.