Fate of minor free amino acids and phospholipids in crude tallow during steam splitting

Minor free amino acids and phospholipids contained in crude tallow were monitored during steam splitting of crude tallow. The bulk of the phospholipids was found in the glycerol sidestream after splitting. Phosphatidic acid and phosphatidylcholine were present in both crude tallow and the glycerol fraction. Phosphatidylserine and phosphatidylethanolamine present in crude tallow were hydrolized with the glycerides. Because of this hydrolysis, high amounts of serine and ethanolamine are found in the fatty acid and glycerol fractions. In addition to constituent amino acids of proteins present in crude tallow, other biological amino acids such as taurine and ornithine were also present.     

Release of alkali and alkaline earth metallic species during rapid pyrolysis of a Victorian brown coal at elevated pressures

Possible reaction mechanisms responsible for the release of Na and Mg during pyrolysis at elevated pressures are described in this paper. In order to evaluate these mechanisms a Victorian brown coal, Loy Yang coal, was pyrolysed in a wire-mesh reactor at pressures up to 6.1 MPa at a heating rate of 1000 °C s⁻¹. Release of Na and Mg were quantified as functions of temperature and pressure. The results demonstrated that increasing pressure suppresses or promotes release of Na and Mg depending on the combination of pressure and temperature. The results obtained have been explained qualitatively by the proposed reaction mechanisms. At temperatures of 600 °C and lower, the release of Na and Mg from the pyrolysing coal/char particles, as light carboxylates, other organic salts and/or metals, was controlled by their diffusion through the pore system of the particles and, therefore, was suppressed by increasing pressure. At higher temperatures, the release of Na and Mg seems to be affected by the changes in intra-particle mass transfer mechanism due to increasing pressure as well as by chemical reactions responsible for the formation of volatile Na and Mg species.     

Application of a JXTA-overlay P2P system for end-device control and e-learning

This work is motivated by the need to develop decentralized P2P approaches for controlling end-devices in a wide-area network without changing the network security policy. Much of current research work on P2P systems is devoted to P2P networks of standard peers such as PCs. Due to improvements of connections capabilities of mobile devices and end-devices, there is an increasing interest to design, implement and deploy full featured P2P networks that integrate standard peers, mobile devices and end-devices. In this paper, we use the JXTA-Overlay for the control of end-devices and e-learning in a P2P network. We considered as end-devices the smart box (which is used for stimulating the learners in our implemented P2P e-learning system), robot, and room lightening. We also considered the control of a mobile car in order to prove the applicability of our approach in wireless environment. The proposed approach, due to the capabilities of JXTA protocols to overcome firewalls and NATs, is able to control devices without changing network security policies. We evaluate the proposed system by many experiments and have shown that the proposed system has a good performance and can be used successfully for the control of end-devices and in e-learning.     

Fragmentation behavior during molten material and coolant interactions

A safe design for a fast breeder reactor (FBR) requires post-accident heat removal (PAHR) for any potential core disruptive accident (CDA). It is important to ensure that the molten core material solidifies in the sodium coolant in the reactor vessel even if all of the core material has melted. In the present experiment, molten material was injected into water to experimentally obtain the information on the molten material jet entering the coolant and its fragmentation. Visual information was obtained with a high-speed video camera, showing that fragmentation behavior on the side of the jet was different from that on the jet front, and that the injection nozzle diameter significantly influenced the jet breakup length, while the molten jet temperature and the coolant temperature did not influence the jet breakup length. Comparison of the diameters of fragments of the solidified molten material thus obtained with fragmentation theory shows that the median fragment diameter is between the critical Weber number theory and the most-unstable wavelength of the instability theory of surface waves at a gas liquid interface.The quench behavior of the molten jet in coolant was calculated for FBR conditions by using the model that reflects actual fragmentation behavior. It was clarified that the mass of molten material in the coolant pool is related to the fragment diameter under FBR conditions.     

Red‐phosphorescent OLEDs employing bis(8‐quinolinolato)phenolato‐aluminum(III) complexes as emission‐layer hosts

Abstract— We have used bis(8‐quinolinolato)phenolato‐aluminum complexes as emission‐layer hosts in red‐phosphorescent OLED devices. This enabled high‐efficiency long‐lived OLED devices with a simple device structure that does not require a hole‐blocking layer. Devices with a red‐phosphorescent dopant introduced into a noble bis(8‐quinolinolato)phenolato‐aluminum complex exhibited a high efficiency of 12 cd/A at CIE color coordinates (0.65, 035) and a long operating lifetime of 30,000 hours or more at an initial luminance of 700 cd/m². Moreover, triplet‐triplet annihilation was reduced in the devices because of the wide emission zone enabled by the complex and the short phosphorescent lifetime of the red‐phosphorescent dopant. We have successfully incorporated these red‐phosphorescent devices into commercial OLED displays.     

Basic and clinical studies on tazobactam/piperacillin in pediatric field

A drug susceptibility test of the combination drug TAZ/PIPC, which consists of a newly developed beta-lactamase inhibitor, tazobactam (TAZ), and one of penicillin antibiotics, piperacillin (PIPC), with combination ratio of 1:4 in potency, was conducted with stock strains and clinical isolates. The clinical efficacy and safety of its injection was also evaluated in children with a variety of infectious diseases. The results were as follows: 1. In susceptibility test, 114 strains from 4 species of stock strains were treated with 8 drugs, that is, TAZ/PIPC, PIPC, penicillin G (PCG), ampicillin (ABPC), cefotiam (CTM), cefotaxime (CTX), ceftazidime (CAZ), and sulbactam/cefoperazone (SBT/CPZ). Of three clinically isolated species from patients, Staphylococcus aureus (S. aureus) was treated with TAZ/PIPC, PIPC, methicillin (DMPPC), CTM, CTX, and SBT/CPZ, and the others were treated with the same drugs except for DMPPC. The MICs were measured for these bacterial strains inoculated at the concentration of 10(6) CFU/ml. The MIC90 values of TAZ/PIPC against 45 strains of Streptococcus pyogenes (S. pyogenes), one of the stock cultures of Gram-positive cocci, were 0.05 microgram/ml and similar to those of PIPC, CTM, CAZ, and SBT/CPZ. The MICs of TAZ/PIPC for 28 strains of Streptococcus agalactiae (S. agalactiae) were 0.39 microgram/ml and similar to those of PIPC, CTM, CAZ, and SBT/CPZ. As for Gram-negative bacilli, the MIC90 of TAZ/PIPC against 10 strains of Bordetella pertussis (B. pertussis) were 0.10 microgram/ml and similar to those of PIPC. The MIC90 of TAZ/PIPC against 31 strains of Haemophilus influenzae (H. influenzae) were 0.05 microgram/ml and similar to those of PIPC, CTX, and SBT/CPZ. Regarding Gram-positive cocci isolated from patients received this combination drug, the MIC90 of TAZ/PIPC against 2 strains of S. aureus, a non beta-lactamase producing strain and a low-beta-lactamase producing strain, were 0.78 microgram/ml and 3.1 micrograms/ml, respectively; the former value was similar to those of PIPC, DMPPC, CTM, and CTX, and the latter was similar to those of PIPC, DMPPC, CTX, and SBT/CPZ. Of 4 strains of Streptococcus pneumoniae, 2 strains were inhibited at 0.05 microgram/ml, and the others at 1.56 micrograms/ml; both values were similar to those of PIPC, SBT/CPZ. As for Gram-negative bacilli, 6 of 7 strains of H. influenzae did not produce beta-lactamase and 1 strain was a high producer. The MICs of TAZ/PIPC against beta-lactamase nonproducing strains were < or = 0.025 microgram/ml in 5 strains and 0.39 microgram/ml in 1 strain, and the values were similar to those of PIPC and SBT/CPZ. While the MIC of TAZ/PIPC against the high beta-lactamase producing strain was 0.78 microgram/ml; similar to that of SBT/CPZ and smaller than that of PIPC. 2. The results of clinical effects on 7 diseases in 33 cases were as follows: TAZ/PIPC was clinically judged "excellent" in 17 (51.5%); good in 14 (42.4%); fair in 2 (6.1%). No case with no response was seen in this study, and the total efficacy rate of "excellent" and "good" was 93.9%. 3. Bacteriological effects were evaluated in 17 strains of 4 species, and all of them were eradicated. 4. Adverse reactions were judged in 35, which consisted of 33 in which the clinical effects were evaluated and 2 dropped from this study. Of these cases, diarrhea was observed in 4 (11.4%). 5. Laboratory tests revealed an increase in platelets in 1 of 32 cases (3.1%), and eosinophilia in 2 of 29 cases (6.9%). Biochemical profile showed an increase in GPT alone and abnormal increases in both GOT and GPT in 1 each out of 21 cases.     

Propagation velocity and photoemission intensity of a localdischarge on an electrolytic surface

An electrolytic solution surface was used to simulate the surface of wet polluted insulators. A local discharge propagates on the solution surface when an impulse voltage is applied to the surface. The intensity of photoemission from the tip of the local discharge, the propagation velocity of the local discharge, and the discharge current were measured simultaneously. It was found that the propagation velocity increases with the photoemission intensity and the resistivity of the solution, and the influence of the air pressure and the applied voltage waveform on the velocity is very small. Furthermore, it was deduced that the ratio of the current through the local discharge tip to the total discharge current is not influenced by the local discharge length and the applied voltage waveform     

Elongation-induced phase separation of poly(vinyl alcohol)/poly(acrylic-acid) blends as studied by C CP/MAS NMR and wide-angle X-ray diffraction

The membrane samples of poly(vinyl alcohol)/poly(acrylic-acid) (PVA/PAA) blend with different draw ratios were studied by both ¹³C CP/MAS NMR and wide-angle X-ray diffraction (WAXD) measurements. Phase separation induced by elongation of the sample was observed and the change of the phase structure with draw ratio was found to be dependent on the composition of the blend samples.     

Electrical and mechanical properties of polyimide-carbon nanotubes composites fabricated by in situ polymerization

Polyimide (PI)-carbon nanotubes composites were fabricated by in situ polymerization using multi wall carbon nanotubes (MWNT) as fillers. It suggested that in situ polymerization is an ideal technique to make a perfect dispersion of carbon nanotubes into matrixes. Besides it, the pre-treatment of carbon nanotubes in solvent to make the networks untied enough and to let solvent percolated into the networks is very important for forming uniform entanglements between carbon nanotubes and polymer molecular chains. The results imply that the percolation threshold for the electric conductivity of the resultant PI-MWNT composites was ca. 0.15 vol%. The electrical conductivity has been increased by more than 11 orders of magnitude to 10⁻⁴ S/cm at the percolation threshold. The mechanical properties of the polyimide composite were not improved significantly by addition of carbon nanotubes.     

Synthesis and characterization of polyacene quinone radical polymers with high-dielectric constant

Polyacene quinone radical polymers (PAQRs) and their hydroxyl- or alkoxyl-modified derivates (HO-PAQR and RO-PAQR) were synthesized through the solid-state heating, the solution polymerization, and the improved process (pre-polymerization before solid-state heating). PAQRs synthesized by the improved process provided the higher yields than those from the other two methods. The high-dielectric constants were achieved for the PAQRs from the solid state and the improved process, due to the high polarization resulted from the existence of large amount of polar domains, which were the aggregation of the conjugated ladder-structured macromolecules with extended regions of associated π-orbital. The HO-PAQRs or RO-PAQRs showed good blending or solving features in polymer or solvent, but they were of low dielectric constants for the groups of hydroxyl and alkoxyl destroyed the planar conjugation of the associated π-orbital, and provided the steric hindrance to the formation of regular stacks of the conjugated macromolecules, which could produce huge polarization. The molecular and the aggregated structures of PAQRs with varied chemical modifications and from varied polymerization processes were confirmed by the analysis of X-ray, IR, TG, TEM and the dielectric measurement.