Individual finger contribution in submaximal voluntary contraction of gripping

The objective of this study was to evaluate individual finger force and contribution to a gripping force, the difference between actual and expected finger forces and subjective discomfort rating at 10 different submaximal voluntary contraction (%MVC) levels (10-100% in 10 increments). Seventy-two participants randomly exerted gripping force with a multi-finger force measurement system. The individual finger force, gripping force and discomfort increased as %MVC levels increased. The middle and ring fingers exerted more force and contributed to a gripping force more than the index and little fingers due to their larger mass fractions of the digit flexor muscles. It was apparent at <50% MVC; however, the index finger increased its contribution and exerted even more force than expected at more than 50% MVC. Subjective discomfort supported the results of the objective measures. This could explain the conflicting findings between index and ring fingers in previous finger contribution studies. STATEMENT OF RELEVANCE: Hand tool design is of special interest in ergonomics due to its association with musculoskeletal disorders in the hand. This study reveals a different contribution pattern of the fingers in submaximal voluntary contraction of gripping exertion.     

New series expansions for fundamental solutions of linear elastostatics in 2D

Series expansions of fundamental solutions are essential to algorithms and analysis of the null field method (NFM) and to analysis of the method of fundamental solutions (MFS). For linear elastostatics, new Fourier series expansions of FS are derived, directly from integration. The new expansions of the FS are simpler than those in Chen et?al. (J Mech 26(3):393?C401, 2010), thus facile to application in NFM and MFS. The new series expansions of FS in this paper are important to both theory and computation of linear elastostatics. Some computation of the MFS for linear elastostatics is provided, where the expansions of fundamental solutions are a basis tool in analysis. Numerical results of a simple example are reported, accompanied with error analysis.     

New receipt-free voting scheme using double-trapdoor commitment

It is considered to be the most suitable solution for large scale elections to design an electronic voting scheme using blind signatures and anonymous channels. Based on this framework, Okamoto first proposed a receipt-free voting scheme [30] for large scale elections. However, in the following paper, Okamoto [31] proved that the scheme [30] was not receipt-free and presented two improved schemes. One scheme requires the help of the parameter registration committee and the other needs a stronger physical assumption of the voting booth. In this paper, we utilize the double-trapdoor commitment to propose a new receipt-free voting scheme based on blind signatures for large scale elections. Neither the parameter registration committee nor the voting booth is required in our scheme. We also present a more efficient zero-knowledge proof for secret permutation. Therefore, our scheme is much more efficient than Okamoto’s schemes [30] and [31] with the weaker physical assumptions. Moreover, we prove that our scheme can achieve the desired security properties.     

Step-by-step improvement of MPS method in simulating violent free-surface motions and impact-loads

The violent free-surface motions and the corresponding impact loads are numerically simulated by using the Moving Particle Semi-implicit (MPS) method, which was originally proposed by Koshizuka and Oka [10] for incompressible flows. In the original MPS method, there were several defects including non-optimal source term, gradient and collision models, and search of free-surface particles, which led to less-accurate fluid motions and non-physical pressure fluctuations. In the present study, how those defects can be remedied is illustrated by step-by-step improvements in the respective processes of the revised MPS method. For illustration, two examples are studied; (i) dam breaking problem and (ii) liquid sloshing inside a rectangular tank. The improvement of each step is explained and numerically demonstrated. The numerical results are also compared against the experimental results of Martin and Moyce [12] for dam-breaking problem and Kishev et al. [9] for sloshing problem. The numerical results for violent free-surface motions and impact pressures are in good agreement with their experimental data.     

Broadband, red-edge information from satellites improves early stress detection in a New Mexico conifer woodland

Multiple plant stresses can affect the health, esthetic condition, and timber harvest value of conifer forests. To monitor spatial and temporal dynamic forest stress conditions, timely, accurate, and cost-effective information is needed that could be provided by remote sensing. Recently, satellite imagery has become available via the RapidEye satellite constellation to provide spectral information in five broad bands, including the red-edge region (690-730 nm) of the electromagnetic spectrum. We tested the hypothesis that broadband, red-edge satellite information improves early detection of stress (as manifest by shifts in foliar chlorophyll a + b) in a woodland ecosystem relative to other more commonly utilized band combinations of red, green, blue, and near infrared band reflectance spectra. We analyzed a temporally dense time series of 22 RapidEye scenes of a piñon-juniper woodland in central New Mexico acquired before and after stress was induced by girdling. We found that the Normalized Difference Red-Edge index (NDRE) allowed stress to be detected 13 days after girdling — between and 16 days earlier than broadband spectral indices such as the Normalized Difference Vegetation Index (NDVI) and Green NDVI traditionally used for satellite based forest health monitoring. We conclude that red-edge information has the potential to considerably improve forest stress monitoring from satellites and warrants further investigation in other forested ecosystems.     

Characterization of terrestrial water dynamics in the Congo Basin using GRACE and satellite radar altimetry

The Congo Basin is the world's third largest in size (~ 3.7 million km²), and second only to the Amazon River in discharge (~ 40,200 m³ s^− 1 annual average). However, the hydrological dynamics of seasonally flooded wetlands and floodplains remains poorly quantified. Here, we separate the Congo wetland into four 3° × 3° regions, and use remote sensing measurements (i.e., GRACE, satellite radar altimeter, GPCP, JERS-1, SRTM, and MODIS) to estimate the amounts of water filling and draining from the Congo wetland, and to determine the source of the water. We find that the amount of water annually filling and draining the Congo wetlands is 111 km³, which is about one-third the size of the water volumes found on the mainstem Amazon floodplain. Based on amplitude comparisons among the water volume changes and timing comparisons among their fluxes, we conclude that the local upland runoff is the main source of the Congo wetland water, not the fluvial process of river-floodplain water exchange as in the Amazon. Our hydraulic analysis using altimeter measurements also supports our conclusion by demonstrating that water surface elevations in the wetlands are consistently higher than the adjacent river water levels. Our research highlights differences in the hydrology and hydrodynamics between the Congo wetland and the mainstem Amazon floodplain.     

Prediction of residual stresses in high strength carbon steel pipe weld considering solid-state phase transformation effects

In this paper, prediction of axial and hoop residual stresses produced in high strength carbon steel pipe weld was made by employing a sequentially coupled 3-D thermal, metallurgical and mechanical FE model. Solid-state phase transformation during welding was incorporated into the FE model by allowing for volumetric changes and the associated changes in yield stress induced by austenitic and martensitic transformations. In the FE model, temperature-dependent thermo-physical and mechanical properties were considered, and phase transformation plasticity was also taken into account. The results showed the importance of incorporating solid-state phase transformation in the simulation of the pipe welding.     

Normal shock boundary layer control with various vortex generator geometries

Various vortex generators which include ramp, split-ramp and a new hybrid concept “ramped-vane” are investigated under normal shock conditions with a diffuser at Mach number of 1.3. The dimensions of the computational domain were designed using Reynolds Average Navier–Stokes studies to be representative of the flow in an external-compression supersonic inlet. Using this flow geometry, various vortex generator concepts were studied with Implicit Large Eddy Simulation. In general, the ramped-vane provided increased vorticity compared to the other devices and reduced the separation length downstream of the device centerline. In addition, the size, edge gap and streamwise position respect to the shock were studied for the ramped-vane and it was found that a height of about half the boundary thickness and a large trailing edge gap yielded a fully attached flow downstream of the device. This ramped-vane also provided the largest reduction in the turbulent kinetic energy and pressure fluctuations. Additional benefits include negligible drag while the reductions in boundary layer displacement thickness and shape factor were seen compared to other devices.     

Fundamental connections among the stability conditions using higher-order time-derivatives of Lyapunov functions for the case of linear time-invariant systems

It has already been recognized that looking for a positive definite Lyapunov function such that a high-order linear differential inequality with respect to the Lyapunov function holds along the trajectories of a nonlinear system can be utilized to assess asymptotic stability when the standard Lyapunov approach examining only the first derivative fails. In this context, the main purpose of this paper is, on one hand, to theoretically unveil deeper connections among existing stability conditions especially for linear time-invariant (LTI) systems, and from the other hand to examine the effect of the higher-order time-derivatives approach on the stability results for uncertain polytopic LTI systems in terms of conservativeness. To this end, new linear matrix inequality (LMI) stability conditions are derived by generalizing the concept mentioned above, and through the development, relations among some existing stability conditions are revealed. Examples illustrate the improvement over the quadratic approach.