Development of 100-W High-Efficiency MPPT Power Conditioner and Evaluation of TEG System with Battery Load

This paper describes a practical high-efficiency thermoelectric (TE) power conditioner with maximum power point tracking (MPPT) control for thermoelectric generators and the operation results for a battery load system. This power conditioner comprises a high-frequency step-up/step-down switching converter and a microcontroller; a synchronized switching circuit is introduced to achieve high conversion efficiency. Furthermore, it is equipped with a battery charge control program and has a maximum conversion efficiency of 96.7%. An impedance matching method developed for MPPT control showed excellent response against a change in the TEG output, making it suitable for solar TEGs as well as general applications.     

Motion blur reduction with triangular waveform emission and optimized enhance filter

Degradation of moving image quality by motion blur on hold‐type displays is a well‐known issue. In order to reduce motion blur, a number of driving methods, such as a higher frame rate and a shorter temporal aperture, have been proposed. Methods to reduce motion blur by means of signal processing as a precompensation method have also been proposed. In these methods, however, hold emission that emits light at a constant intensity during a frame is used. Since the spatial frequency response of the hold emission in a moving picture has a null point, the effectiveness of precompensation methods is limited to the lower‐spatial frequency domain. A triangular waveform emission has been investigated, and it has a higher spatial frequency response than hold emission. In the present paper, we calculated an optimized enhancement filter for the triangular waveform emission as a precompensation method and demonstrated its effectiveness for reducing motion blur by using the triangular waveform emission and the optimized enhancement filter. As a result, the optimized enhancement filter reduced motion blur and suppressed distortion that emerged when using a conventional enhancement filter.     

Control of carrier density by self-assembled monolayers in organic field-effect transistors

Organic thin-film transistors are attracting a great deal of attention due to the relatively high field-effect mobility in several organic materials. In these organic semiconductors, however, researchers have not established a reliable method of doping at a very low density level, although this has been crucial for the technological development of inorganic semiconductors. In the field-effect device structures, the conduction channel exists at the interface between organic thin films and SiO(2) gate insulators. Here, we discuss a new technique that enables us to control the charge density in the channel by using organosilane self-assembled monolayers (SAMs) on SiO(2) gate insulators. SAMs with fluorine and amino groups have been shown to accumulate holes and electrons, respectively, in the transistor channel: these properties are understood in terms of the effects of electric dipoles of the SAMs molecules, and weak charge transfer between organic films and SAMs.     

Ambipolar Light‐Emitting Transistors of a Tetracene Single Crystal

The first ambipolar light‐emitting transistor of an organic molecular semiconductor single crystal, tetracene, is demonstrated. In the device configuration, electrons and holes injected from separate magnesium and gold electrodes recombined radiatively within the channel. By varying the applied voltages, the position of the recombination/emission zone could be moved to any position along the channel. Because of the changes made to the device structure, including the use of single crystals and polymer dielectric layers and the adoption of an inert‐atmosphere fabrication process, the set of materials that can be used for light‐emitting transistors has been expanded to include monomeric molecular semiconductors.     

Structural study of single-walled carbon nanotube films doped by a solution method

Herein, we have studied a structure of SWNT films doped by organic molecules. In this study, we reacted organic molecules with SWNT films by a vapor phase and a liquid phase, respectively. The structure of doped SWNT films was investigated using synchrotron X-ray powder diffraction measurements, and we found the clear difference between the vapor phase reaction (v-doped) and the liquid phase reaction (I-doped). In v-doped SWNT films, organic molecules are predominantly encapsulated inside SWNTs, although molecules adsorbed on the surface of SWNT bundles in l-doped SWNT films.     

A particle population analysis in Ti- and Al- deoxidized Hadfield steels

A quantitative analysis of the amount, size and number of particles that precipitate in situ in titanium- and aluminium-treated Hadfield steel cast during pilot-scale experiments has been performed. SEM with EDS and automated particle analysis abilities was utilized for the analysis. Additionally, Thermo-Calc was used for thermodynamic calculations and Magma 5 for solidification and cooling simulations. Predicted particles sizes calculated with a model based on the Ostwald ripening mechanism were compared with the experimental data. The effect of solute availability, cooling rate and deoxidation practice on the particle population characteristics was determined. It was concluded that the amount, size and number of precipitating particles in Hadfield steel castings is possible to be controlled according to certain requirements by a careful selection of proper additives in proper amounts and also by the optimization of the casting process in aspects of deoxidation timing and control of the cooling rate of the castings.     

On the thermal conductivity of CGI and SGI cast irons

The thermal conductivity of Compacted Graphite Iron (CGI) and spheroidal graphite iron (SGI) was established in the temperature range from room temperature up to 500 °C using the experimental thermal diffusivity, density and specific heat values. The influence of nodularity, graphite amount, silicon content and temperature on the thermal conductivity of fully ferritic high-silicon cast irons was investigated. It was found that the CGI materials showed higher thermal conductivity than the SGI materials. The thermal conductivity tended to increase with increasing temperature until it reached a maximum followed by a subsequent decrease as temperature was increased up to 500 °C. Conventional models were applied to estimate thermal conductivity and the predictive accuracy of each model was evaluated. The thermal conductivity could be estimated by the Helsing model. The Maxwell model, Bruggeman model and Hashin–Shtrikman model were also in fair agreement using the thermal conductivity value of graphite parallel to the basal planes in graphite.     

Novel Abscisic Acid Antagonists Identified with Chemical Array Screening

Abscisic acid (ABA) signaling is involved in multiple processes in plants, such as water stress control and seed dormancy. Major regulators of ABA signaling are the PYR/PYL/RCAR family receptor proteins, group A protein phosphatases 2C (PP2Cs), and subclass III of SNF1‐related protein kinase 2 (SnRK2). Novel ABA agonists and antagonists to modulate the functions of these proteins would not only contribute to clarification of the signaling mechanisms but might also be used to improve crop yields. To obtain small molecules that interact with Arabidopsis ABA receptor PYR1, we screened 24 275 compounds from a chemical library at the RIKEN Natural Products Depository by using a chemical array platform. Subsequent SnRK2 and PP2C assays narrowed down the candidates to two molecules. One antagonized ABA in a competitive manner and inhibited the formation of the PYR1‐ABA‐PP2C ternary complex. These compounds might have potential as bioprobes to analyze ABA signaling.