Laser brazing of a dissimilar joint of austenitic stainless steel and pure copper

In many industries, there are applications that require the joining of stainless steel and copper components; therefore, the welding of dissimilar stainless steel/copper joints is a common process. For this investigation, the optimal brazing conditions and suitable filler metals for laser brazing of stainless steel/copper lap joints were studied. Tensile shear force increases with increases in the laser spot diameter or in the laser irradiation angle, which is associated with increased bonding width; however, as bonding width approaches 2 mm, tensile shear force reaches a saturated value due to fracturing at the HAZ of the Cu base plate. In order to obtain joints with high tensile shear strength, laser brazing was optimized by using Cu–Si-based filler metal under the following conditions: laser power, 4 kW; spot diameter, 3 mm; laser irradiation angle, 80°; irradiation position shift, 0.6 mm; brazing speed, 0.30 m/min; and filler metal feed speed, 0.30 min. Concerning filler metals, it was found that the Ni–Cu type showed relatively large tensile shear force even at high welding speeds in comparison with those of the Cu–Si, Cu, Cu–Ni, Ni–Cu and Ni types, respectively.     

Lower Tropospheric Aerosol Measurements by MAX-DOAS During Severe Asian Dust Period

A recently developed aerosol retrieval algorithm based on O₄ slant column densities (SCDs) measured at a visible wavelength (476 nm) was utilized to derive aerosol information (e.g., aerosol optical depth (AOD) and vertical distributions of aerosol extinction coefficients (AECs)) in the lower troposphere during a severe Asian dust period. The MAX-DOAS measurements were carried out at Gwangju, Korea for nearly three months from February through May 2008. Comparison with AOD and surface PM₁₀, measured by collocated sunphotometer and beta gauge sampler, were made to validate the retrieved AODs and AECs in the atmospheric layer surface to 1 km height above ground. On the Asian dust days, temporal variations of the AODs retrieved from MAX-DOAS measurements show similar patterns, but with reduced magnitudes, to those measured by sunphotometer whereas similar AOD magnitude and temporal variation was observed between MAX-DOAS and sunphotometer measurements during the non-episodic days. Smaller correlation was observed between the surface PM₁₀ and AECs at 0.5 km during the Asian dust period compared to the correlation obtained for the non episodic days. This study demonstrates the ability of MAX-DOAS as a remote sensing technique for surface aerosol measurements under conditions of homogeneously distributed pollution in the planetary boundary layer. However, for the measurement of significantly enhanced aerosol loads with heterogeneous vertical distribution (e.g., Asian dust), measured AODs and AECs are underestimated at altitudes above 1 km due to decreased sensitivity of MAX-DOAS measurements at high altitudes.     

High tensile strength fiber of poly[(R)‐3‐hydroxybutyrate‐co‐(R)‐3‐hydroxyhexanoate] processed by two‐step drawing with intermediate annealing

High tensile strength fibers of poly[(R)‐3‐hydroxybutyrate‐co‐(R)‐3‐hydroxyhexanoate] [P(3HB‐co‐3HH)], a type of microbial polyesters, were processed by one‐step and two‐step cold‐drawn method with intermediate annealing. Thermal degradation behaviors were characterized by differential scanning calorimeter and gel permeation chromatography measurements. Thermal analyses were revealed that molecular weights decreased drastically within melting time at a few minute. One‐step cold‐drawn fiber with drawing ratio of 10 showed tensile strength of 281 MPa, while tensile strength of as‐spun fiber was 78 MPa. When two‐step drawing was applied for P(3HB‐co‐3HH) fibers, the tensile strength was led to 420 MPa. Furthermore, the optimization of intermediate annealing condition leads to enhance the tensile strength at 552 MPa of P(3HB‐co‐3HH) fiber. Wide‐angel X‐ray diffraction measurements of these fibers suggest that the fibers with high tensile strength include much amount of the planer‐zigzag conformation (β‐form) as molecular conformation together with 2₁ helix conformation (α‐form). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41258.     

Calcitonin gene-related peptide (CGRP)-containing nerve fibers in bone tissue and their involvement in bone remodeling

Bone remodeling is a process of bone renewal accomplished by osteoclastic bone resorption and osteoblastic bone formation. These two activities are regulated by systemic hormones and by local cytokines and growth factors. Moreover, the nervous system and certain neuropeptides seem to be involved in regulation of bone remodeling. In this paper, we focus on the distribution of CGRP-containing nerve fibers and their dynamics, and discuss the role of these fibers as a possible mechanism for nervous system involvement in regulation of bone remodeling. CGRP-immunoreactive nerve fibers are widely distributed in bone tissue, such as periosteum and bone marrow, and show apparent regional distribution with different densities. They are often associated with blood vessels and show a beaded appearance. The wide distribution of CGRP-immunoreactive nerve fibers in bone tissue and the changes in distribution during bone development and regeneration suggest the involvement of these fibers in bone remodeling. The effect of CGRP on bone remodeling could partly be through its action on blood vessels, thereby regulating local blood flow. Moreover, in vitro biochemical data and the localization of CGRP-immunoreactive nerve fibers in the vicinity of bone cells suggest that they are directly involved in local regulation of bone remodeling by elevating the concentration of CGRP in the microenvironment around bone cells, especially during bone growth or repair.     

The measurement of hydrogen activities in molten copper using an oxide protonic conductor

We have developed a hydrogen sensor for in situ measurements of hydrogen activities in molten copper. The sensor consists of a concentration cell utilizing a proton conductor, CaZr_0.9In_0.1O_3-δ, as the solid electrolyte. The electromotive force (emf) of the cell was generated by both hydrogen and oxygen activity gradients across the cell in a high-temperature region simulating the fire refining processes of copper. However, accurate hydrogen activity in molten copper could be evaluated from the emf if oxygen activity in molten copper was determined simultaneously by another concentration cell and if the hydrogen and the oxygen activities at the reference electrode were known. The performance of the sensor was studied under various conditions. The observed good response and reliability of the sensor show that it should be a powerful tool for improvement of the fire refining process of the molten copper. Theoretical treatment of the calculation of the emf of the concentration cells using a mixed ionic conductor, i.e., protonic and oxide ionic conductor, as solid electrolytes is also discussed briefly.     

Obstructive jaundice due to multiple hepatic abscesses

A 63-year-old Japanese male with diabetes mellitus developed obstructive jaundice following the onset of multiple hepatic abscesses. Percutaneous transhepatic cholangiography showed intrahepatic bile duct irregularity and dilatations accompanied by a complete obstruction of the right branch of the intrahepatic bile duct. Three kinds of organisms were cultured from the blood and the drained bile. The cholangiographic changes returned to the normal after the liver abscesses subsided following biliary drainage and the administration of intravenous antibiotics.     

Serum concentrations of apolipoproteins in patients with thyroid dysfunction

We measured serum concentrations of apolipoproteins (apo A-I, A-II, B, C-II, C-III and E) in patients with thyroid disease (hyperthyroidism; n = 44, hypothyroidism; n = 15) and in normal subjects (n = 89). We found that apoA-II, B and C-III concentrations revealed significant difference among three groups of the normal (apoA-II; 31.4 +/- 4.9 mg/dl, apoB; 85.8 +/- 16.3 mg/dl, apoCIII; 7.45 +/- 2.99 mg/dl), hyperthyroidism (apoA-II; 29.8 +/- 5.4, apoB; 63.4 +/- 18.9, apoC-III; 6.28 +/- 2.45) and hypothyroidism (apoA-II; 27.5 +/- 5.3, apoB; 108.0 +/- 30.9, apoC-III; 9.43 +/- 2.74). Thyroid hormones showed clear negative correlation to apoB (r = 0.70, p < 0.001). Furthermore, apoC-III was also found to be negatively correlated with thyroid hormone concentrations (r = 0.47, p < 0.001).     

Psychosocial evaluation on the correct recollection of periodic medical checkups of workers. 2. Long-term change in the recalled results of medical checkups

A self-administered questionnaire study of 333 workers (male 253, female 80) in a manufacturing company was carried out one month after informing the workers of the results of their medical checkups in 1993. The questionnaire included several items such as recalled abnormal findings of health examination and ways of overcoming the abnormal findings, recalled results of their medical checkups in 1992, self-confidence in their recollection of the results, and the usefulness of medical checkups. The following were investigated: the relationship between actual as well as recalled results of medical checkups in 1992 and the recollection of them after one year, the effects of examinations after medical checkups in 1992 on their recollection of the checkup results after one year, the effects of actual as well as recalled 1992 checkup results on the recollection of the results one month after informing the workers of the results of their medical checkups in 1993, assurance of correct recollection of the results, the relationship between the usefulness of medical checkups, explanation of abnormal findings and the percentage of correct answers to the results of medical checkups in 1993 one month after informing the workers of their results. It was found that the percentage of correct answers to the results after one year was significantly lower than that after one month in 1992. The rate decreased with the increase in the number of abnormal items in medical checkups. Moreover, the rate also decreased when the results were abnormal. Further examinations in addition to the medical checkups influenced their recollection somewhat after one year. The results that the workers still remembered in 1992 had a stronger effect on their recalling the results one month after informing them in 1993 than the actual results in 1992. The workers' confidence in their recollection of the results was untrustworthy in the same way as their recollection of the results, and they were not able to maintain the recollection of the correct results, although many of the workers realized the usefulness of the medical checkups. Our results suggest that explanation of abnormal medical findings in 1993 was effective because the percentage of partial concordance between actual and recalled results was much higher in the workers who received the explanation than in the workers who did not receive it.     

Structures of spider toxins: hydroxyindole-3-acetylpolyamines and a new generalized structure of type-E compounds obtained from the venom of the Joro spider, Nephila clavata

Facile structure determination of acylpolyamines, glutamatergic nerve blocker obtained from the venom of the Joro spider (Nephila clavata) was carried out with the use of micro-column LC/MS and high energy collision induced dissociation (CID) mass spectrometry. 6-hydroxyindole-3-acetyl was proposed previously as a putative partial structure, for the acyl moiety of hydroxyindole-type polyamines (NPTX-1 to -6). The NMR data obtained for NPTX-6, NPTX-687 and hydroxyindole-3-acetic acid which was released by acid hydrolysis of Nephila clavata crude venom extracts proved that the lipophilic head is the 4-hydroxyindole-3-acetic acid. Various hydroxyindole-3-acetyl polyamines were found in N. Clavata venom and characterized by mass spectrometry. As a result, type-E, a new class of generalized acylpolyamine structure was proposed in addition to the previously reported polyamine backbones type-A to -D.