A hybrid approach to keyframe extraction from motion capture data using curve simplification and principal component analysis

In this paper, we propose a novel method to extract keyframes from motion capture data. A hybrid approach, which combines a curve‐simplification algorithm with an initialization procedure including principal component analysis, is adopted. The developed method automatically extracts an appropriate number of keyframes at high speed without performance degradation. Experimental results prove the effectiveness of the present method. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Development of an on‐line partial discharge monitoring system for gas insulated substations

This paper describes the results of tests and discussions carried out to develop a system for partial discharge monitoring in GIS. They include the propagation characteristics of partial discharge pulses in each GIS component, as well as the test results obtained using an actual 300‐kV GIS. We also report the results of verification test on the GIS partial discharge monitoring and location system developed by the authors. © 1999 Scripta Technica, Electr Eng Jpn, 129(2): 40–50, 1999     

Application of step‐response test for evaluation of uncertainty of standard measuring system for lightning‐impulse high voltage

In evaluating the uncertainty of the standard measuring system for lightning‐impulse high voltages, which is composed of a standard voltage divider, a digital recorder, and calibrators, step‐response tests of the standard voltage divider may be useful. In this paper, a convolution algorithm is employed to calculate the output impulse voltage waveforms from measured step‐response waveforms. The uncertainties of peak‐value measurement due to the influence of the nominal epoch, uncertainty of the peak‐value measurement due to dispersion of the AC scale factor, and uncertainty of the virtual front‐time measurement due to long‐term stability are evaluated. Furthermore, the error of the virtual front time of the output waveforms is discussed. The front part of the step‐response waveform, t≤ T₃₀%, does not influence the error of the virtual front time. Therefore, for the standard voltage divider, the step‐response parameters, that is, the experimental response time, partial response time, settling time, and overshoot, have almost nothing to do with the error of the virtual front time. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 180(2): 24–32, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21279     

Size dependence of THz region dielectric properties for barium titanate fine particles

Barium titanate (BaTiO₃) crystallites with various particle sizes from 22 to 500 nm were prepared by the two-step thermal decomposition method of barium titanyl oxalate. Various characterizations revealed that these particles were impurity-free, defect-free, dense BaTiO₃ particles. The powder dielectric measurement clarified that the dielectric constant of BaTiO₃ particles with a size of around 58 nm exhibited a maximum of over 15,000. To explain this size dependence, the THz region dielectric properties of BaTiO₃ fine particles, especially Slater mode frequency, were measured using the far infrared (FIR) reflection method. As the result, the lowest Slater mode frequency was obtained at 58 nm. This tendency was completely consistent with particle size dependence of the dielectric constant.     

High-dose,intermediate-temperature neutron irradiation effects on silicon carbide composites with varied fiber/matrix interfaces

SiC/SiC composites are promising structural candidate materials for various nuclear applications over the wide temperature range of 300–1000 °C. Accordingly, irradiation tolerance over this wide temperature range needs to be understood to ensure the performance of these composites. In this study, neutron irradiation effects on dimensional stability and mechanical properties to high doses (11–44 dpa) at intermediate irradiation temperatures (?600 °C) were evaluated for Hi-Nicalon Type-S or Tyranno-SA3 fiber–reinforced SiC matrix composites produced by chemical vapor infiltration. The influence of various fiber/matrix interfaces, such as a 50–120 nm thick pyrolytic carbon (PyC) monolayer interphase and 70–130 nm thick PyC with a subsequent PyC (?20 nm)/SiC (?100 nm) multilayer, was evaluated and compared with the previous results for a thin-layer PyC (?20 nm)/SiC (?100 nm) multilayer interphase. Four-point flexural tests were conducted to evaluate post-irradiation strength, and SEM and TEM were used to investigate microstructure. Regardless of the fiber type, monolayer composites showed considerable reduction of flexural properties after irradiation to 11–12 dpa at 450–500 °C; and neither type showed the deterioration identified at the same dose level at higher temperatures (>750 °C) in a previous study. After further irradiation to 44 dpa at 590–640 °C, the degradation was enhanced compared with conventional multilayer composites with a PyC thickness of ?20 nm. Multilayer composites have shown comparatively good strength retention for irradiation to ?40 dpa, with moderate mechanical property degradation beginning at 70–100 dpa. Irradiation-induced debonding at the F/M interface was found to be the major cause of deterioration of various composites.     

Response of isotopically tailored titanium diboride to neutron irradiation

The response of polycrystalline TiB₂ to neutron irradiation was investigated. The material was fabricated using isotopically enriched ¹¹B powders to minimize helium production via the ¹⁰B(n, α)⁷Li reaction. Neutron irradiation was conducted at temperatures of ~200°C and ~600°C to a fast fluence of 2.4 × 10²⁵ n/m² (>0.1 MeV). The material exhibited some swelling, but less swelling at the higher irradiation temperature. No macroscopic damage was observed in the irradiated material, although moderate irradiation-induced micro-cracking was found in the irradiated TiB₂. This study demonstrated improved radiation resistance of isotopically tailored TiB₂ compared with natural boron TiB₂, which exhibited macroscopic fracture by irradiation.     

Size exclusion behavior of polymers in amide solvents

Summary The size exclusion chromatography of neutral polymers and polymers containing ionic groups was investigated using N,N-dimethylacetamide (DMA) as mobile phase. As reported previously for N,N-dimethylformamide (DMF), acrylonitrile polymers containing charges, even those at terminal end groups, showed markedly small retention volumes and multimodal peaks by refractive index and 280 nm UV detectors. In DMA containing small amounts of LiBr the peaks of the ionic polymers were shifted to small retention volumes while neutral polymers with analogous chemical structures did not show the same behavior. As in the case of DMF the peculiarities observed in DMA were attributed to the formation of supramolecular structures by the interaction of the ionic groups in the polymer and the ionic species from DMA decomposition.     

Hairpin-based state machine and conformational addressing: Design and experiment

In this paper, we propose a new architecture for a multi-state DNA machine whose conformation of repeated hairpin structures changes sequentially in response to input oligomers. As an application of the machine, we also propose molecular memory in which the machine is used as a memory unit. Addressing in the memory is realized through state transitions of the machine. We then describe a method for designing DNA sequences of the machine, which exhaustively checks conformational changes of the machine by dividing its secondary structure into hairpin units. The method is based on the minimum free energy of the structure, the structure transition paths, and the total frequency of optimal and suboptimal structures. DNA sequences designed by the method were tested in a chemical experiment in which a machine consisting of two hairpins was actually constructed. As a result, we verified that the multi-state DNA machine realized the expected changes in its secondary structure.     

Synthesis of optimal controllers for piecewise affine systems with sampled-data switching

This paper discusses the optimal control problem of the continuous-time piecewise affine (PWA) systems with sampled-data switching, where the switching action is executed based upon a condition on the state at each sampling time. First, an algebraic characterization for the problem to be feasible is derived. Next, an optimal continuous-time controller is derived for a general class of PWA systems with sampled-data switching, for which the optimal control problem is feasible but whose subsystems in some modes may be uncontrollable in the usual sense. Finally, as an application of the proposed approach, the high-speed and energy-saving control problem of the CPU processing is formulated, and the validity of the proposed methods is shown by numerical simulations.