Crystal transformation from the α- to the β-form upon tensile drawing of poly(l-lactic acid)

A film of poly(l-lactic acid) (PLLA) consisting of highly oriented α crystals was uniaxially drawn by tensile force. The effects of the draw ratio (DR), draw temperature (T_d), and draw stress on the crystal/crystal transformation from the α- to the β-form crystals were studied. At the initial stage of drawing, the highly oriented α crystals of the starting film transformed into a broader orientation distribution, and significant crystal disorder was introduced. Upon further drawing, the α crystals steadily transformed into β crystals with increasing the DR. For the drawing at a constant T_d, the crystal transformation proceeded more efficiently at a higher draw rate and, hence, at a higher draw stress. Furthermore, for the drawing at a constant draw rate, the transformation proceeded with DR most efficiently for the tensile draw at a T_d around 140 °C, although the draw stress increased with decreasing the T_d. The present result combined with the previous finding in the drawing of PLLA by solid-state extrusion [Macromolecules 36 (2003) 3601] suggests that there is a T_d of around 140 °C at which the crystal transformation proceeds most efficiently with DR, suggesting that there are two factors that have opposite effects on the efficiency of the crystal transformation with increasing the T_d. However, as a result of the combined effects of the T_d and DR on the crystal transformation and the ductility increase with the T_d, an oriented film consisting predominantly of β crystals was obtained by tensile drawing at a T_d in the range of 140-170 °C to the highest DR achieved at each T_d.     

蒙药材止泻木子生物碱的分离与纯化

以夹竹桃科植物止泻木子的干燥种子为原材料,采用乙醇提取法对其生物碱类物质进行粗提取,通过硅胶柱层析和重结晶技术对生物碱粗提物进行分离和纯化。利用核磁共振波谱和质谱法对其一种生物碱单体进行化学结构和分子量鉴定。实验结果表明,用70%乙醇在60℃条件下静止浸取3次,每次提取6 h,得到止泻木子总生物碱提取物,其得率达到0.244%。经过硅胶柱分离和重结晶纯化,可获得3种生物碱单体。对HPLC检测纯度达到94.89%的2号生物碱单体进行核磁共振波谱和质谱检测,得知该生物碱单体是一个分子量为356.59的锥丝碱（conessine）。该结果有利于了解以止泻木子为主要成分的蒙药药剂作用机理。     

Hydrothermal Synthesis and Formation Mechanisms of Lanthanum Tin Pyrochlore Oxide

Well-defined La₂Sn₂O₇ with a phase-pure pyrochlore structure was produced by hydrothermal synthesis at temperatures as low as 200°C. Production of phase-pure La₂Sn₂O₇ requires a pH above 10, and higher pH accelerates the crystallization process. The synthesis produced spherical particles of average particle size ∼0.59 μm (±0.12) and surface area ∼14.1 m²/g. SEM and TEM observation for morphologic evolution and kinetic analysis during crystallization indicated that La₂Sn₂O₇ formation probably proceeds via a two-step reaction. First a transient dissolution–precipitation occurs. Then the primary crystallites aggregate because of their colloidal instability, and heterocoagulation with the lanthanum hydrous oxide precursor particles also occurs. The sluggish reaction rate at the later stage of reaction is characterized by an in situ transformation, where the soluble tin species is diffused through the porous La₂Sn₂O₇ aggregates to react with entrapped lanthanum precursors.     

Toughening of cyanate ester resin by N‐phenylmaleimide–N‐(p‐hydroxy)phenyl‐maleimide–styrene terpolymers and their hybrid modifiers

N‐Phenylmaleimide–N‐(p‐hydroxy)phenylmaleimide–styrene terpolymer (HPMS), carrying reactive p‐hydroxyphenyl groups, was prepared and used to improve the toughness of cyanate ester resins. Hybrid modifiers composed of N‐phenylmaleimide–styrene copolymer (PMS) and HPMS were also examined for further improvement in toughness. Balanced properties of the modified resins were obtained by using the hybrid modifiers. The morphology of the modified resins depends on HPMS structure, molecular weight and content, and hybrid modifier compositions. The most effective modification of the cyanate ester resin was attained because of the co‐continuous phase structure of the modified resin. Inclusion of the modifier composed of 10 wt% PMS (M_w 136 000 g mol^?1) and 2.5 wt% HPMS (hydroxyphenyl unit 3 mol%, M_w 15 500 g mol^?1) led to 135% increase in the fracture toughness (K_IC) for the modified resin with a slight loss of flexural strength and retention of flexural modulus and glass transition temperature, compared with the values for the unmodified resin. Furthermore, the effect of the curing conditions on the mechanical and thermal properties of the modified resins was examined. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviour of the modified cyanate ester resin system. © 2001 Society of Chemical Industry     

Relationship between Expression of Onco-Related miRNAs and the Endoscopic Appearance of Colorectal Tumors

Accumulating data indicates that certain microRNAs (miRNAs or miRs) are differently expressed in samples of tumors and paired non-tumorous samples taken from the same patients with colorectal tumors. We examined the expression of onco-related miRNAs in 131 sporadic exophytic adenomas or early cancers and in 52 sporadic flat elevated adenomas or early cancers to clarify the relationship between the expression of the miRNAs and the endoscopic morphological appearance of the colorectal tumors. The expression levels of miR-143, -145, and -34a were significantly reduced in most of the exophytic tumors compared with those in the flat elevated ones. In type 2 cancers, the miRNA expression profile was very similar to that of the exophytic tumors. The expression levels of miR-7 and -21 were significantly up-regulated in some flat elevated adenomas compared with those in exophytic adenomas. In contrast, in most of the miR-143 and -145 down-regulated cases of the adenoma-carcinoma sequence and in some of the de novo types of carcinoma, the up-regulation of oncogenic miR-7 and/or -21 contributed to the triggering mechanism leading to the carcinogenetic process. These findings indicated that the expression of onco-related miRNA was associated with the morphological appearance of colorectal tumors.     

Development of a microchannel catalytic reactor system

The purpose of this article is to demonstrate the applicability of microreactors for use in catalytic reactions at elevated temperatures. Microchannels were fabricated on both sides of a silicon wafer by wet chemical etching after pattern transfer using a negative photoresist. The walls of the reactor channel were coated with a platinum layer, for use as a sample catalyst, by sputtering. A heating element was installed in the channel on the opposite surface of the reactor channel. The reactor channel was sealed gas-tight with a glass plate by using an anodic bonding technique. A small-scale palladium membrane was also prepared on the surface of a 50-Μm thick copper film. In the membrane preparation, a negative photoresist was spin-coated and solidified to serve as a protective film. A palladium layer was then electrodeposited on the other uncovered surface. After the protective film was removed, the resist was again spin-coated on the copper surface, and a pattern of microslits was transferred by photolithography. After development, the microslits were electrolitically etched away, resulting in the formation of a palladium membrane as an assemblage of thin layers formed in the microslits. The integration of the microreactor and the membrane is currently under way.     

Wettability of a microgrid‐structured polymer film with microfabrication utilizing the stick–slip phenomenon

A microgrid structure was formed on the surface of a polyethylene terephthalate (PET) film with an original microfabrication method (termed SS processing) utilizing the stick–slip (SS) phenomenon, and the effect of this surface structure on wettability was evaluated. Microgrid‐structured films could be fabricated by two‐axis SS processing. Moreover, an arbitrary parallelogram microgrid structure could be formed by selecting the direction of the second SS processing with respect to that of the first SS processing. Both water contact angle and water sliding angle of the SS‐processed film were larger than that of the PET film. Hence, the SS‐processed film showed a petal‐like effect. Furthermore, the water sliding angle of the microgrid‐structured film showed anisotropy due to the pinning effect derived from the microgrid structure. As a result, it is revealed that a hydrophobic PET film with a petal‐like effect and anisotropic wettability can be fabricated by SS processing. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45140.     

Centrifugal Filter for Aerosol Collection

Air filters collect particles by the mechanical collection mechanisms, namely, inertia, interception, gravitational settling, and Brownian diffusion. There exists the most penetrating particle size (MPPS) in submicron size range for which none of the collection mechanisms work effectively. In this study, we propose a new type of filter named as “centrifugal filter,” which collects aerosol particles by centrifugal force together with the conventional mechanical collection mechanisms. The centrifugal filter proposed in the present work may be rotated by a motor or compressed air. Air passes through the filter in the axial direction of filter rotation. The filter rotates so does the air embedded in the filter, and therefore centrifugal force exerts on particles. In addition to the mechanical collection mechanisms, small migration of particles due to the centrifugal force enhanced the collection efficiency of submicron particles significantly without increasing the pressure drop. The performance tests of centrifugal filter were conducted by changing the fiber diameter, the air flow velocity and the rotation speed. We found that the collection efficiency of filter is enhanced significantly by rotating the filter without increasing the pressure drop and that the filter efficiency is well predicted by the conventional filtration theory accounting for the centrifugal force.

Copyright 2015 American Association for Aerosol Research     

Probability distributions of gas hydrate formation

Induction time distributions for gas hydrate formation were measured for gas mixtures of methane + propane at pressures up to 11.3 MPa using a high‐pressure automated lag time apparatus (HP‐ALTA). Measurements were made at subcooling temperatures between 4.3 and 13.5 K and, while isothermal induction times between 0 and 15,000 s were observed, the median isothermal induction times for the distributions ranged from 100 to 4000 s. A hyperbolic relationship between median induction time and subcooling was used to correlate the data. A graphical interpretation is presented that relates the two types of data that can be acquired by using the HP‐ALTA in one of two modes to study hydrate formation: induction time distributions at constant subcooling and formation temperature distributions observed during linear cooling ramps. The equivalence of these two modes provides a robust method for studying the variation of formation phenomena in different hydrate systems. © 2013 American Institute of Chemical Engineers AIChE J, 59: 2640–2646, 2013     

Inorganic Design of Protein Assemblies as Supramolecular Platforms

In the last decade, there has been great deal of progress in the study of self-assembly processes of protein assemblies as biotemplates to create and construct one-dimensional arrays of nanocrystalline metals and semiconductors. Successful attempts in fabricating the protein-based bioelectronics could serve as a promising alternative to synthetic template based nanomaterials. Another perspective of protein assemblies is its use in the field of tissue engineering either as scaffold for cell adhesion and proliferation or as a foreign (bio)nanofunctionality to communicate with the macromolecules present in the extracellular or intracellular milieu and participate in the precise control of vital cell functions. Three-dimensionally arranged protein monomers to form bionanotubes are promising in terms of innate biocompatibility, easy bio-conjugation to incorporate multiple functionalities and well-defined nano-scale lengths. Such unique chemical properties of protein assemblies are described in this review.