Simple Method for Measuring the Peroxide Value in a Colored Lipid

We developed a simple method for quantification of the peroxide value (PV) in colored lipids on the basis of the reaction between triphenylphosphine (TPP) and oxidized oil to afford triphenylphosphineoxide (TPPO). Diphenylphosphineoxide (DPPO) was employed as internal standard. The formed TPPO was analyzed by high-pressure liquid chromatography–UV spectroscopy with absorption at 260 nm. The conditions that gave the highest correlative calibration curve between the peak area on the chromatogram and peroxide value were identified: the optimum TPP–oxidized oil mix ratio, reaction temperature, and reaction time were found to be 2:1, 40 °C, and 30 min, respectively. Linear calibration curves, passing through the origin, were obtained for PV versus TPPO and TPPO versus DPPO. The quantification limit for this method was 2.01 pmol hydroperoxyl group, which corresponds to a PV value of 0.2 meq/kg in a 10-mg oil sample. This method was used to measure the PV in colored fats and oils or lipids extracted from dark meat and processed food containing a coloring agent. Though the official method could not measure the PVs in the colored lipids, the method proposed here, which uses an inexpensive chemical reagent and machine, could. The developed method could play an important role for food quality control.     

Separation of Ru(III), Rh(III) and Pd(II) from nitric acid solutions using ion-exchange resins bearing carboxylic betaine

To understand the adsorption properties of a styrene–divinylbenzene copolymer functionalized with N,N,N-trimethylglycine, AMP03, the adsorption behaviours for platinoid ions (Ru(III), Rh(III) and Pd(II)) were examined. Furthermore, we performed adsorption experiments using sample solutions by adding triethylamine, thiourea and N,N,N-trimethylglycine. Based on the adsorption data obtained in this study, we performed chromatographic experiments. The results indicated that all platinoid ions in the feed solution completely adsorbed on AMP03, and almost 80% of the adsorbed platinoid ions were recovered. These results show that AMP03 has the potential to recover Ru(III), Rh(III) and Pd(II) from high-level liquid waste.     

Inhibitory Effect of 8‐Halogenated 7‐Deaza‐2′‐deoxyguanosine Triphosphates on Human 8‐Oxo‐2′‐deoxyguanosine Triphosphatase,hMTH1, Activities

hMTH1 (8‐oxo‐2′‐deoxyguanine triphosphatase) hydrolyzes oxidized nucleoside triphosphates; its presence is non‐essential for survival of normal cells but is required for survival of cancer cells. In this study, 8‐halogenated‐7‐deaza‐2′‐deoxyguanosine triphosphate (8‐halogenated‐7‐deazadGTP) derivatives were synthesized. Interestingly, these triphosphates were poor substrates for hMTH1, but exhibited strong competitive inhibition against hMTH1 at nanomolar levels. This inhibitory effect is attributed to slower rate of hydrolysis, possibly arising from enzyme structural changes, specifically different stacking interactions with 8‐halogenated‐7‐deazadGTP. This is the first example of using nucleotide derivatives to inhibit hMTH1, thus demonstrating their potential as antitumor agents.     

以健康理念出发：戴尔医学区景观设计

正戴尔医学院及附属教学医院戴尔塞顿医疗中心地处奧斯汀中部德州大学奥斯汀分校校园。占地逾6.5 hm2的医学区是市内最大的医疗卫生开发区的一部分,不仅为医学院全院师生及访客提供服务,更在校园景观中创造出一片新风貌,立下全新的生态绩效标准。戴尔医学区的景观设计过程是Sasaki及顾问团队过去2年规划工作的延续,项目团队先后在2012—2014年为大学制定了校园总体规划、医学区总体规划以及德州大学奥斯汀分校景观总体规划与设计导则。与之前的总体规划项目一样,戴尔医学区的景观设计同样以多元     

Characterization of the Oxide Scale Formed on T12 Water Wall Tube After Long-term Service in Supercritical Power Plant

Oxidation of Metals - Oxide scale control is one of the critical maintenance issues in fossil fuel power plant. Hence, the water treatment of the feed water has been changed from all-volatile...     

Small-angle X-ray scattering studies on melting and recrystallization behaviors of poly(oxyethylene) crystallites in poly(d,l-lactide)/poly(oxyethylene) blends

Direct determination of the discrete distribution for crystalline lamellar thickness has been performed for poly(d,l-lactic acid)/poly(oxyethylene) (PDLLA/PEG) blends by conducting small-angle X-ray scattering (SAXS) measurements using synchrotron radiation. The PDLLA used was an random (racemic) copolymer of bio-based poly(l-lactic acid) (PLLA) and poly(d-lactic acid) (PDLA) with the lactide monomer ratio of l:d = 50:50. It is known that PLA is miscible with PEG in the amorphous state. In the current paper, we report comprehensive results on structural analyses of PDLLA/PEG blends in the course of heating and cooling process using SAXS to elucidate the change in the thickness distribution of the lamellae. As a consequence, it was found that the distribution of the lamellar thickness moves toward the larger value (in other words, lamellar thickening) as temperature approaches the melting point. Typically, the thickness distribution was dispersed in the range of 10–20 nm at room temperature and it changed toward 40 nm in the vicinity of the melting temperature. To the best of our knowledge, this is the first report of direct determination of the discrete distribution for the crystalline lamellar thickness and their in-situ changes in the course of the lamellar thickening process. As a result, the lamellar thickening was found to occur at much lower temperature for the blend samples with 10% and 20% of PDLLA contents as compared to the PEG 100% sample. This phenomenon can be ascribed to the melting point depression owing to the miscibility between PEG and PDLLA. Thereby, thinner lamellae were melted and thicker ones appeared at much lower temperature for the blends than for the PEG 100% sample. As for the average repeating distance (long period) of the lamellar stacks, an abrupt increase similar to the critical divergence was observed (from 25 nm to 50 nm) in the heating process. Not only for the melting behavior but also in the course of recrystallization, change in the lamellar-thickness distribution was uncovered, which shows strong hysteresis depending on what temperature the sample was cooled down from.     

Change in molecular weight distribution by elution of polymers from PVA cast gel

Poly(vinyl alcohol) (PVA) cast gels with high degrees of polymerization and hydrolysis were prepared at room temperature. After sufficient exchange of the outer solvent by fresh pure water, the gel was re-dissolved in pure water at a high temperature. Using this solution, the cast gel was prepared again. This re-dissolution process was repeated again, and a third cast gel was prepared. During each swelling process after each cast-drying process, the amount of elution from the gel was measured and the molecular weight distributions of PVA in the gel as well as in the outer solvent were quantitatively evaluated. The molecular weight distribution of the eluted PVA was found to depend on that of the PVA in the gel; the average molecular weight gradually increased as the re-dissolution process was repeated, while the polydispersity indices of both the PVA from the gel and the eluted PVA decreased.     

Mutation Analysis of Radioresistant Early-Stage Cervical Cancer

Radiotherapy is a definitive treatment for early-stage cervical cancer; however, a subset of this disease recurs locally, necessitating establishment of predictive biomarkers and treatment strategies. To address this issue, we performed gene panel-based sequencing of 18 stage IB cervical cancers treated with definitive radiotherapy, including two cases of local recurrence, followed by in vitro and in silico analyses. Simultaneous mutations in KRAS and SMAD4 (KRAS^mt/SMAD4^mt) were detected only in a local recurrence case, indicating potential association of this mutation signature with radioresistance. In isogenic cell-based experiments, a combination of activating KRAS mutation and SMAD4 deficiency led to X-ray resistance, whereas either of these factors alone did not. Analysis of genomic data from 55,308 cancers showed a significant trend toward co-occurrence of mutations in KRAS and SMAD4. Gene Set Enrichment Analysis of the Cancer Cell Line Encyclopedia dataset suggested upregulation of the pathways involved in epithelial mesenchymal transition and inflammatory responses in KRAS^mt/SMAD4^mt cancer cells. Notably, irradiation with therapeutic carbon ions led to robust killing of X-ray-resistant KRAS^mt/SMAD4^mt cancer cells. These data indicate that the KRAS^mt/SMAD4^mt signature is a potential predictor of radioresistance, and that carbon ion radiotherapy is a potential option to treat early-stage cervical cancers with the KRAS^mt/SMAD4^mt signature.     

Rewired Cellular Metabolic Profiles in Response to Metformin under Different Oxygen and Nutrient Conditions

Metformin is a metabolic disruptor, and its efficacy and effects on metabolic profiles under different oxygen and nutrient conditions remain unclear. Therefore, the present study examined the effects of metformin on cell growth, the metabolic activities and consumption of glucose, glutamine, and pyruvate, and the intracellular ratio of nicotinamide adenine dinucleotide (NAD⁺) and reduced nicotinamide adenine dinucleotide (NADH) under normoxic (21% O₂) and hypoxic (1% O₂) conditions. The efficacy of metformin with nutrient removal from culture media was also investigated. The results obtained show that the efficacy of metformin was closely associated with cell types and environmental factors. Acute exposure to metformin had no effect on lactate production from glucose, glutamine, or pyruvate, whereas long-term exposure to metformin increased the consumption of glucose and pyruvate and the production of lactate in the culture media of HeLa and HaCaT cells as well as the metabolic activity of glucose. The NAD⁺/NADH ratio decreased during growth with metformin regardless of its efficacy. Furthermore, the inhibitory effects of metformin were enhanced in all cell lines following the removal of glucose or pyruvate from culture media. Collectively, the present results reveal that metformin efficacy may be regulated by oxygen conditions and nutrient availability, and indicate the potential of the metabolic switch induced by metformin as combinational therapy.