Flashover voltage characteristics of contaminated station insulators under temporary ac overvoltages in the ac system connected with a frequency converter station

According to the recent analysis results of temporary ac overvoltage in the ac system connected with a frequency converter station, large-magnitude over-voltages were confirmed to occur under some special system conditions. Most of the station insulators currently used cannot withstand such overvoltages according to an evaluation based on the data obtained earlier. The necessity of tests to be done to evaluate such performance more accurately was recognized. Both power frequency and switching impulse overvoltage flashover tests were made on contaminated insulators by the method well simulating the natural wetting condition. Switching impulse flashover voltage with the waveshape having a long wavefront time of 2 ms can be well correlated with the flashover voltage characteristics of temporary ac overvoltage. Higher flashover voltage characteristics were obtained by a clean fog test method compared with those obtained by equivalent fog test method.     

Boundary element analysis of thin plates internally bounded by rigid patches

Procedures are described for modelling a structural system consisting of thin Kirchhoff plates with internal patch areas capable of displacing as rigid flat surfaces. The physical prototype for these patches could be interconnection points for one-dimensional frame type elements of various shapes and layout, rigidly connected at these finite size 'joints' in the plate. The numerical procedure for modelling the thin plate is the Direct Boundary Element Method (DBEM) and a simple overview of this procedure is provided. Potential trouble spots, of which the user should be aware, are described. The paper will be of interest to structural engineers for analysis of frames having both plate and simple frame elements, for example, building frames; and also to researchers seeking the greater detail that this refined procedure can provide. As a practical tool, the methods described are computationally competitive with existing procedures, including the more rugged approaches used by building structural engineers for dynamic and torsional analysis.     

Optical properties of evaporated Ge20Se80−x Tl x thin films

Chalcogenide glasses with composition Ge₂₀Se_80–x Tl _x (x=10, 15, 20, 25, 35%) have been prepared by the usual melt-quenching technique. Thin films of the mentioned compositions have been prepared by the electron beam evaporation. In addition, another set taken from the composition ofX=30 at % with different thicknesses (d=14.7, 30.0, 56.5, 70.0, 101.0, 180.0 nm) have been taken into consideration. The X-ray diffraction (XRD) analysis revealed the amorphous nature of the prepared films. It was found that, in contrast to the optical gap (E _op), both the extent of the band tailing (B), and the band gap (E _e) increase with increasing thallium content. In other side,E _op showed thickness independency. The refractive index (n) showed obvious dependence on both composition and thickness also on the energy of the incident radiation.     

Radiative ignition mechanism of solid fuels

Transmittance of external radiation from a CO₂ laser through a boundary layer of decomposition products over a vertical sample surface is measured during the ignition period. The results indicate that there is significant absorption of the external radiation for PMMA, and a lesser but still not negligible amount, for red oak. An increase in gas phase temperature over surface temperature is observed over much of the ignition interval. Using the experimentally measured incident flux at the sample surface, surface temperature history was calculated from a model that included re-radiation and convection losses from the surface, endothermic decomposition and conduction into the material. The results confirm the significant effect of gas phase absorption on surface temperature. Steady-state-derived surface regression rate expression was used for PMMA in this model. The results raise questions about the validity of such data for the dynamic heating conditions during the ignition period. Further studies needed to understand the radiative ignition mechanism are identified.     

A 50-MS/s (35 mW) to 1-kS/s (15 /spl mu/W) power scaleable 10-bit pipelined ADC using rapid power-on opamps and minimal bias current variation

A novel rapid power-on operational amplifier and a current modulation technique are used in a 10-bit 1.5-bit/stage pipelined ADC in 0.18-/spl mu/m CMOS to realize power scalability between 1 kS/s (15 /spl mu/W) and 50 MS/s (35 mW), while maintaining an SNDR of 54-56 dB for all sampling rates. The current modulated power scaling (CMPS) technique is shown to enhance the power scaleable range of current scaling by 50 times, allowing ADC power to be varied by a factor of 2500 while only varying bias currents by a factor of 50. Furthermore, the nominal power is reduced by 20%-30% by completely powering off the rapid power-on opamps during the sampling phase in the pipeline's sample-and-holds.     

Targeting optimum resource allocation using reverse problem formulations and property clustering techniques

Decoupling the constitutive equations from the balance and constraint equations allows for reformulating a conventional forward problem into two reverse problems. The first reverse problem is the reverse of a simulation problem, where the process model is solved in terms of the constitutive (synthesis/design) variables instead of the process variables, thus providing the synthesis/design targets. The second reverse problem (reverse property prediction) solves the constitutive equations to identify unit operations, operating conditions and/or products by matching the synthesis/design targets. Visualization of the problem is achieved by employing recently developed property clustering techniques, which allows a high-dimensional problem to be visualized in two or three dimensions. The clusters by definition satisfy intra-stream and inter-stream conservation through linear “mixing” rules, which allows for the development of consistent additive rules along with their ternary representation.     

Analysis and Optimization of Noise in Bipolar RF Harmonic Mixers

A noise analysis of bipolar harmonic mixers (BHM) used for direct-conversion receivers is presented in this paper. Analytical and simulated results for the transfer function of the mixer are presented. Simple analytical expressions describing noise contribution from all sources are derived. Estimation of flicker noise quite agrees with harmonic-balance simulation results. Based on the derived expressions, total time average noise power spectral density (PSD) at the output is compared with simulation results. For the recommended regions of operation, error is less than 20%. The overall BHM noise figure (NF) is calculated and optimized based on a simple extracted formula. Errors introduced by analysis remain within a 1.5-dB margin with respect to simulation results. The validity of analysis for high frequencies is justified. The effect of flicker noise coefficient on the overall mixer NF is compared for different available processes.     

Risk Assessment in Construction

This study is concerned with the assessment of risk for major construction activities. Risk has been defined as a measure of the probability, the severity, and the exposure of all hazards of an activity. A risk assessor model (RAM) was developed and computerized to determine the risk associated with a particular activity and the justification factor for a proposed remedy. Knowing the value of risk would help contractors identify the high risk of major construction activities and would enable them to allocate safety precautions in a more efficient manner.     

Ru-catalyzed anode materials for direct hydrocarbon SOFCs

A solid oxide fuel cell using a thin ceria-based electrolyte film with a Ru-catalyzed anode was directly operated on hydrocarbons, including methane, ethane, and propane, at 600 °C. The role of the Ru catalyst in the anode reaction was to promote the reforming reaction of the unreacted hydrocarbons by the produced steam and CO₂, which avoided interference from steam and CO₂ in the gas-phase diffusion of the fuels. The resulting peak power density reached 750 mW cm⁻² with dry methane, which was comparable to the peak power density of 769 mW cm⁻² with wet (2.9 vol.% H₂O) hydrogen. More important was the fact that the cell performance was maintained at a high level regardless of the change in the methane utilization from 12 to 46% but was significantly reduced by increasing the hydrogen utilization from 13 to 42%. While the anodic reaction of hydrogen was controlled by the slow gas diffusion, the anodic reaction of methane was not subject to the onset of such a gas-diffusion process.