In vivo visual reporter system for detection of estrogen-like substances by transgenic medaka

Detection of endocrine disrupting chemicals, in particular, environmental estrogens with living organisms, has many advantages if compared to chemical analysis. The screening of novel pollutants with meaningful endpoints, the integration of uptake, bioconcentration, and excretion as well as the evaluation of endocrine disrupting effects with respect to toxicity require in vivo biotests for estrogen-like substances (ELSs). Critical disadvantages of whole organism biotests are their low sensitivity and the need for laborious and time-consuming work. To overcome these problems, we have developed a transgenic medaka strain harboring the green fluorescence protein (GFP) gene driven by choriogenin H gene regulatory elements. Choriogenin H is an egg envelope protein induced by estrogens in the liver. With yolk sac larvae of this strain, GFP induction in liver was observed 24 h after onset of aqueous exposure to 0.63 nM 17beta-estradiol (E2), 0.34 nM ethynylestradiol, or 14.8 nM estrone. Furthermore, concentrated sewage treatment effluent induced GFP expression. Comparison of E2 equivalents estimated by GFP-induction in transgenic medaka, a YES assay, and GC/MS showed detection limits in the same order of magnitude. These results indicated that the sensitivity of the transgenic medaka strain was sufficient for application as an alternative model in monitoring environmental water samples for ELSs.     

Biomass-based composites from poly(lactic acid) and wood flour by vapor-phase assisted surface polymerization

To prepare biomass-based composites in an environmentally benign manner, vapor-phase assisted surface polymerization (VASP) was applied to prepare the composites from wood flour and poly(l-lactic acid) (PLLA) without solvent. VASP of l,l-lactide successfully proceeded on the wood flour surfaces, resulting in surface coverage by newly generated PLLA. For obtained PLLA/wood flour composites, it was clarified that grafting of PLLA on wood flour surfaces had occurred to form covalently bonded composites, with the accumulated PLLA layers having crystallized in situ during VASP. Resulting PLLA layers showed very high crystallinity of 79.2% and a high melting point close to the equilibrium melting point. Moreover, thermal degradation behavior of the composites suggested a cooperative degradation manner of the components.     

Photochemical reduction of CO₂ using TiO₂: effects of organic adsorbates on TiO₂ and deposition of Pd onto TiO₂

Reduction of CO(2) using semiconductors as photocatalysts has recently attracted a great deal of attention again. The effects of organic adsorbates on semiconductors on the photocatalytic products are noteworthy. On untreated TiO(2) (P-25) particles a considerable number of organic molecules such as acetic acid were adsorbed. Although irradiation of an aqueous suspension of this TiO(2) resulted in the formation of a significant amount of CH(4) as a major product, it was strongly suggested that its formation mainly proceeded via the photo-Kolbe reaction of acetic acid. Using TiO(2) treated by calcination and washing procedures for removal of the organic adsorbates, CO was photocatalytically generated as a major product, along with a very small amount of CH(4), from an aqueous suspension under a CO(2) atmosphere. In contrast, by using Pd (>0.5 wt %) deposited on TiO(2) (Pd-TiO(2)) on which organic adsorbates were not detected, CH(4) was the main product, but CO formation was drastically reduced compared with that on the pretreated TiO(2). Experimental data, including isotope labeling, indicated that CO(2) and CO(3)(2-) are the main carbon sources of the CH(4) formation, which proceeds on the Pd site of Pd-TiO(2). Prolonged irradiation caused deactivation of the photocatalysis of Pd-TiO(2) because of the partial oxidation of the deposited Pd to PdO.     

Gas detection by structural variations of fluorescent guest molecules in a flexible porous coordination polymer

The development of a new methodology for visualizing and detecting gases is imperative for various applications. Here, we report a novel strategy in which gas molecules are detected by signals from a reporter guest that can read out a host structural transformation. A composite between a flexible porous coordination polymer and fluorescent reporter distyrylbenzene (DSB) selectively adsorbed CO? over other atmospheric gases. This adsorption induced a host transformation, which was accompanied by conformational variations of the included DSB. This read-out process resulted in a critical change in DSB fluorescence at a specific threshold pressure. The composite shows different fluorescence responses to CO? and acetylene, compounds that have similar physicochemical properties. Our system showed, for the first time, that fluorescent molecules can detect gases without any chemical interaction or energy transfer. The host-guest coupled transformations play a pivotal role in converting the gas adsorption events into detectable output signals.     

Synthesis of SnS nanoparticles by SILAR method for quantum dot-sensitized solar cells

SnS-sensitized TiO2 electrodes were applied in quantum dot-sensitized solar cells (QDSSCs) which are environmentally more favorable than conventional Cd or Pb-chalcogenide-sensitized electrodes. SnS nanoparticles were well-distributed over the surface of TiO2 nanoparticles by the successive ionic layer adsorption and reaction (SILAR) method. Deposited SnS nanoparticles had diameter about 3 nm. Under AM1.5 irradiation with 100 mW/cm2 light intensity (at 1 sun), the energy conversion efficiency of obtained cells reached a value of 0.21% (0.25 cm2) at SILAR coating cycles of 5. In addition, the photovoltaic performance was improved by additional ZnS coating on the surface of SnS-sensitized TiO2 electrodes.     

Fabrication of carbon nanofibers using only ion beam irradiation to glassy carbon

Carbon nanofibers (CNFs) and carbon nanotubes (CNTs) are new carbon-based materials. However, the production of CNFs and CNTs is very difficult due to the complicated processes and high temperature involved. Therefore, a method of fabrication is required that enables high throughput at a low cost.Our previous study reported that oxygen ion beam energy of 500 eV applied to glassy carbon (GC) forms the finest pitch conical anti-reflection (AR) structures, and that an irradiation time of more than 24 min fabricates conical AR structures with heights of more than 250 nm. After the fabrication of the AR structures, irradiation by an argon ion (Ar⁺ beam changes the surface morphology, and oblique angle irradiation can form CNFs. Thus, we carried out oblique Ar⁺ beam irradiation on conical carbon protrusions on GC fabricated by oxygen ion beam irradiation. As a result, CNFs have been formed using oxygen and argon ion beam irradiation at room temperature. In addition, multi-wall CNT can be obtained by two-step ion beam irradiation.     

Japanese contribution to the DEMO-R&D program under the Broader Approach activities

Several technical R&D activities mainly related to the blanket materials are newly launched as a part of the Broader Approach (BA) activities, which was initiated by the EU and Japan. According to the common interests for these parties in DEMO, R&Ds on reduced activation ferritic/martensitic (RAFM) steels as structural material, SiC_f/SiC composites as a flow channel insert material and/or alternative structural material, advanced tritium breeders and neutron multipliers, and tritium technology are carried out through the BA DEMO R&D program, in order to establish the technical bases on the blanket materials and the tritium technology required for DEMO design. This paper describes overall schedule of those R&D activities and recent progress in Japan carried out by JAEA as the domestic implementing agency on BA, collaborating with Japanese universities and other research institutes.