Design of zero-phase recursive 2-D variable filters with quadrantal symmetries

The digital filters with adjustable frequency-domain characteristics are called variable filters. Variable filters are useful in the applications where the filter characteristics are needed to be changeable during the course of signal processing. In such cases, if the existing traditional constant filter design techniques are applied to the design of new filters to satisfy the new desired characteristics when necessary, it will take a huge amount of design time. So it is desirable to have an efficient method which can fast obtain the new desired frequency-domain characteristics. Generally speaking, the frequency-domain characteristics of variable filters are determined by a set of spectral parameters such as cutoff frequency, transition bandwidth and passband width. Therefore, the characteristics of variable filters are the multi-dimensional (M-D) functions of such spectral parameters. This paper proposes an efficient technique which simplifies the difficult problem of designing a 2-D variable filter with quadrantally symmetric magnitude characteristics as the simple one that only needs the normal one-dimensional (1-D) constant digital filter designs and 1-D polynomial approximations. In applying such 2-D variable filters, only varying the part of 1-D polynomials can easily obtain new desired frequency-domain characteristics.     

Dynamic Power Integrity Control of ATE for Eliminating Overkills and Underkills in Device Testing

This paper proposes a power integrity control technique for dynamically controlling power supply voltage fluctuations for a device under test (DUT), and demonstrates its effectiveness for eliminating the overkills/underkills due to the difference of power supply impedance between an automatic test equipment (ATE) and a practical operating environment of the DUT. The proposed method injects compensation currents into the power supply nodes on the ATE system in a feed-forward manner such that the ATE power supply waveform matches with the one on the customer’s operating environment of the DUT. A method for calculating the compensation current is also described. Experimental results show that the proposed method can emulate the power supply voltage waveform under a customer’s operating condition and eliminate 95 % of overkills/underkills in the maximum operating frequency testing with 105 real silicon devices. Limitations and applications of the proposed method are also discussed.     

Growth,Cathodoluminescence and Field Emission of ZnS Tetrapod Tree‐like Heterostructures

We report the growth mechanism, cathodoluminescence and field emission of dual phase ZnS tetrapod tree‐like heterostructures. This novel heterostructures consist of two phases: zinc blende for the trunk and hexagonal wurtzite for the branch. Direct evidence is presented for the polarity induced growth of tetrapod ZnS trees through high‐resolution electron microscopy study, demonstrating that Zn‐terminated ZnS (111)/(0001) polar surface is chemically active and S‐terminated ( )/(000 ) polar surface is inert in the growth of tetrapod ZnS trees. Two strong UV emissions centered at 3.68 and 3.83 eV have been observed at room temperature, which are attributed to the bandgap emissions from the zinc blende trunk and hexagonal wurtzite branch, indicating that such structures can be used as unique electromechanical and optoelectronic components in potential light sources, laser and light emitting display devices. In addition, the low turn‐on field (2.66 Vµm⁻¹), high field‐enhancement factor (over 2600), large current density (over 30 mAcm⁻² at a macroscopic field of 4.33 Vµm⁻¹) and small fluctuation (∼1%) further indicate the availability of ZnS tetrapod tree‐like heterostructures for field emission panel display. This excellent field‐emission property is attributed to the specific crystallographic feature with high crystallinity and cone‐shape patterned branch with nanometer‐sized tips. Such a structure may optimize the FE properties and make a promising field emitter.     

Transmission Characteristics of Hybrid Modes in Corrugated Waveguides Above the Bragg Frequency

We studied the transmission characteristics of hybrid modes in a corrugated circular waveguide above the Bragg frequency to develop a broad-band transmission line for millimeter waves. Millimeter waves at 294 GHz were transmitted into a straight waveguide. From observed power profiles in waveguide cross-sections, a high attenuation rate of 0.13 dB/m was obtained. To match a theoretical attenuation constant with the experimental one, we introduced an ad hoc coefficient of conventional surface reactance in the waveguide wall. This was necessary because the wall began to look like the surface with a decreasing anisotropic reactance owing to the frequency above the Bragg frequency. Using nonlinear optimization for mode content analysis, the observed power profiles in the waveguide cross-section were matched with theoretical profiles. There was good agreement between the calculated and observed centers of power profiles and attenuation rate along the waveguide. The theoretical analysis showed that the magnetic field at the waveguide wall increases and the substantial attenuation takes place. Above the Bragg frequency coupling to backwards propagating modes is a point of consideration. A combination of the backwards propagating EH_1,26 and the forward propagating HE₁₁ modes satisfied the Bragg condition at 294.7 GHz which was the nearest frequency of operating frequency. A strong attenuation of the incoming HE₁₁ mode by Bragg resonance was not expected due to large difference of 0.7 GHz. It becomes clear that the observed high transmission loss outside of the Bragg resonance can be explained by a decrease in anisotropic surface reactance at the wall.     

Effects of Heavy Element Substitution on Electronic Structure and Lattice Thermal Conductivity of Fe2VAl Thermoelectric Material

By using first-principles cluster calculations, we identified that Ta or W substitution for V is useful for decreasing the lattice thermal conductivity of the Fe₂VAl Heusler alloy without greatly affecting the electron transport properties. It was clearly confirmed that the Fe₂(V_1?x Ta _x )Al_0.95Si_0.05 (x?=?0, 0.025, 0.05), Fe₂(V_0.9?x Ta _x Ti_0.1)Al (x?=?0, 0.10, 0.20), and Fe₂(V_0.9?2x W _x Ti_0.1+x )Al (x?=?0, 0.05, 0.10) alloys indeed possessed large Seebeck coefficient regardless of the amounts of substituted elements, while their lattice thermal conductivity was effectively reduced. As a result of partial substitution of Ta for V, we succeeded in increasing the magnitude of the dimensionless figure of merit of the Heusler phase up to 0.2, which is five times as large as the Ta-free compound.     

A Water‐Soluble Mechanochromic Luminescent Pyrene Derivative Exhibiting Recovery of the Initial Photoluminescence Color in a High‐Humidity Environment

Switching of the luminescence properties of molecular materials in response to mechanical stimulation is of fundamental interest and also has a range of potential applications. Herein, a water‐soluble mechanochromic luminescent pyrene derivative having two hydrophilic dendrons is reported. This pyrene derivative is the first example of a mechanochromic luminescent organic compound that responds to relative humidity. Mechanical stimulation (grinding) of this pyrene derivative in the solid state results in a change of the photoluminescence from yellow to green. Subsequent exposure to water vapor induces recovery of the initial yellow photoluminescence. The color change is reversible through at least ten cycles. It is also demonstrated that this compound can be applied as a mechano‐sensing material in frictional wear testing for grease, owing to its immiscibility in non‐polar solvents and its non‐crystalline behavior. Transmission electron microscope and atomic force microscope observations of samples prepared from dilute aqueous solutions of the pyrene derivative on suitable substrates, together with dynamic light scattering measurements for the compound in aqueous solution, indicate that this amphiphilic dumbbell‐shaped molecule forms micelles in water.     

Colored Fluorescent Silk Made by Transgenic Silkworms

Silk is a protein fiber used to weave fabrics and as a biomaterial in medical applications. Recently, genetically modified silks have been produced from transgenic silkworms. In the present study, transgenic silkworms for the mass production of three colors of fluorescent silks, (green, red, and orange) are generated using a vector originating from the fibroin H chain gene and a classical breeding method. The suitability of the recombinant silks for making fabrics is investigated by harvesting large amounts of the cocoons, obtained from rearing over 20 thousand silkworms. The application of low temperature and a weakly alkaline solution for cooking and reeling enables the production of silk fiber without loss of color. The maximum strain tolerated and Young's modulus of the fluorescent silks are similar to those of ordinary silk, although the maximum stress value of the recombinant silk is slightly lower than that of the control. Fabrics with fluorescent color are demonstrated using the recombinant silk, with the color persisting for over two years. The results indicate that large amounts of genetically modified silk can be made by transgenic silkworms, and the silk is applicable as functional silk fiber for making fabrics and for use in medical applications.     

Direct Growth of Germanene at Interfaces between Van der Waals Materials and Ag(111)

Germanene, a 2D honeycomb germanium crystal, is grown at graphene/Ag(111) and hexagonal boron nitride (h-BN)/Ag(111) interfaces by segregating germanium atoms. A simple annealing process in N₂ or H₂/Ar at ambient pressure leads to the formation of germanene, indicating that an ultrahigh-vacuum condition is not necessary. The grown germanene is stable in air and uniform over the entire area covered with a van der Waals (vdW) material. As an important finding, it is necessary to use a vdW material as a cap layer for the present germanene growth method since the use of an Al₂O₃ cap layer results in no germanene formation. The present study also proves that Raman spectroscopy in air is a powerful tool for characterizing germanene at the interfaces, which is concluded by multiple analyses including first-principles density functional theory calculations. The direct growth of h-BN-capped germanene on Ag(111), which is demonstrated in the present study, is considered to be a promising technique for the fabrication of future germanene-based electronic devices.     

Tunable Terahertz Device Using Refractive Index Control

We measured the thermal dependencies of the refractive index and the absorption coefficient of high-resistivity silicon. We found that the refractive index varied slightly with temperature, and the absorption coefficient was very low and remained approximately constant as the temperature was changed. As a result, the conditions for terahertz propagation in silicon could be controlled by changing the refractive index without any absorption loss. As one application of this effect, we developed a terahertz time delay generator that can generate a terahertz time delay by changing the temperature of the medium through which the terahertz beam passes, without the need for any mechanical delay. We demonstrated generation of a terahertz time delay of approximately 6.6 ps.     

Transient phenomena of space charge distributions in polypropylene laminated paper

In a multilayer insulator made of two or more materials with different dielectric constants and conductivities, internal space change accumulates at their interfaces. If the local field is increased by the accumulated charge, the electric durability of the insulator should be decreased. In this paper, we describe the space charge accumulation measured when oil-impregnated PPLP (polypropylene laminated paper), which consists of three layers, kraft paper, polypropylene (PP), and kraft paper, was subjected to a strong dc electric field. The experimental results suggest that internal space charge accumulates at both surfaces of a PP layer and that the electric field in the kraft paper layers disappears. © 1998 Scripta Technica, Electr Eng Jpn, 124(1): 1–6, 1998