Polymer/polymer blend solar cells with 2.0% efficiency developed by thermal purification of nanoscale-phase-separated morphology

We have fabricated polymer/polymer blend solar cells consisting of poly(3-hexylthiophene) as the electron donor and poly{2,7-(9,9-didodecylfluorene)-alt-5,5-[4',7'-bis(2-thienyl)-2',1',3'-benzothiadiazole]} as the acceptor. The power conversion efficiency (PCE) was strongly dependent on solvents employed for spin coating. The best PCE of 2.0% was obtained for thermally annealed devices prepared from a chloroform solution, in contrast to devices fabricated from chlorobenzene and o-dichlorobenzene solutions. On the basis of the morphology-performance relationship in the polymer blends examined by atomic force microscopy and the photoluminescence quenching measurements, we conclude that the highly efficient performance is achieved by thermal purification of nanoscale-phase-separated domains formed by spin coating from chloroform.     

A bona fide two-dimensional percolation model: an insight into the optimum photoactivator concentration in La2/3-xEuxTa2O7 nanosheets

La–Eu solid solution nanosheets La_2/3−xEu_xTa₂O₇ have been synthesized, and their photoluminescence properties have been investigated. La_2/3−xEu_xTa₂O₇ nanosheets were prepared from layered perovskite compounds Li₂La_2/3−xEu_xTa₂O₇ as the precursors by soft chemical exfoliation reactions. Both the precursors and the exfoliated nanosheets exhibit a decrease in intralayer lattice parameters as the Eu contents increase. However, there is a discontinuity in this trend between the nominal Eu content ranges x≤ 0.3 and x ≥ 0.4. This discontinuity is attributed to the difference in degree of TaO₆ octahedra tilting for the La- and Eu-rich phases. La_2/3−xEu_xTa₂O₇ nanosheets exhibit red emission, characteristic of the f–f transitions in Eu³⁺ photoactivators. The photoluminescence emission can be obtained from both host and direct photoactivator excitation. However, photoluminescence emission through host excitation is much more dominant than that through direct photoactivator excitation, and this behavior is consistent with that of all the other rare-earth photoactivated nanosheets reported previously. The absolute photoluminescence quantum efficiency of the La_2/3−xEu_xTa₂O₇ nanosheets increases as the experimentally determined Eu contents increase up to x=0.45 and decrease above it. This result is in good agreement with the optimum photoactivator concentration expected from the percolation theory. These solid solution La_2/3−xEu_xTa₂O₇ nanosheets are excellent models for validating the theory of optimum photoactivator concentration in the truly two-dimensional photoactivator matrix.     

Initial stages of high-temperature CaF2/Si(001) epitaxial growth studied by surface X-ray diffraction

Surface X-ray diffraction was applied to study structure of the fluorite-silicon interface forming upon epitaxial growth of CaF2 on Si(001) surface kept at 750 degrees C. Samples with CaF2 coverage of 1.5-4 (110)-monolayers were grown and in-situ characterized using synchrotron radiation. The 3 x 1-like surface reconstruction was observed in agreement with the previous studies by electron diffraction. Interestingly, a well pronounced splitting of the fractional x 1/3 reflections was revealed. This splitting was ascribed to the effect of antiphase domain boundaries in the row-like structure of the interface layer. The in-plane integrated intensities were used to reconstruct two-dimensional atomic structure of the high-temperature CaF2/Si(001) interface.     

A new modeling approach for circuit‐field‐coupled time‐stepping electromagnetic analysis of saturated interior permanent magnet synchronous motors

This paper proposes a new modeling approach for circuit‐field‐coupled time‐stepping electromagnetic analysis of a saturated interior permanent magnet synchronous motor (IPMSM). To predict the drive performance quickly, the proposed approach consists of a dynamic simulator based on a new analytical model of the d‐ and q‐axis magnetization characteristics (λ‐i_d‐i_q‐θ). The model can take into account not only cross‐saturation but also the harmonics of the inductance distributions and EMF waveforms. The validity of the model is verified from suitable simulation results for the instantaneous current and torque waveforms of the IPMSM. The proposed analysis leads to a dramatic reduction in the computation time compared to circuit‐field‐coupled time‐stepping FEA, while maintaining analytical accuracy. The effectiveness of the proposed method is experimentally verified using a 10‐kW, 15,000‐rpm concentrated‐winding IPM motor. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 174(1): 49–58, 2011; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.21024     

适于运动估值VLSI实现的改进的树结构

文中给出了一种用于实现多分辨率运动估算算法后阶段任务的改进的树结构。在一个简单的RISC类型核控制下,它能够完成整个运动估值过程中除粗分辨率精度运动矢量搜索之外的所有后阶段子任务。包括运动矢量优化（搜索）在内的多任务是通过二叉树最底层叶节点上的多功能处理单元和可以拆分成子树的加法树来实现的。此外,运算单元寄存器堆的设计使能在二维方向上复用图像数据,完全避免了同一类数据从存储器中重复读取,从而实现了最小的存储器访问带宽,并有助于减小存储功耗。     

Evaluating landslide deposits along the Tsurukawa fault zone, Japan, using magnetic susceptibility

 This paper describes the results of in-situ measurements of magnetic susceptibility in landslide deposits along the Tsurukawa fault zone in central Japan. The measured magnetic susceptibility values range from 0.4 to 9.6×10^–3 (in SI) and correspond to the proportions of the two component materials, weathered volcanic ash and faulted rock fragments. The study shows that landslide deposits along the Tsurukawa fault zone are composed of varying proportions of weathered volcanic ash. The results contrast with some general assumptions concerning landslides along fault zones in Japan. Received: 16 April 1999 · Accepted: 10 August 1999     

Characteristics of surface roughening during plane strain compression of polycrystalline iron

Roughening behavior of the free surface of polycrystalline iron during plane strain compression is investigated experimentally. The changes in the shape of the free surface, which is roughened during plastic deformation, are observed in the three-dimensions. It is found that the mountains and the valleys of the roughened shape tend to elongate in the constrained direction for the specimen with isotropic grain shape. The shapes of the roughness curves in the loading direction and in the constrained direction are compared. The normalized height distribution of the roughness curve in the constrained direction is symmetric, while that of the roughness curve in the loading direction is asymmetric and positively skew during plane strain compression. Based on a simple simulation of the roughness curves by a random midpoint displacement method, this difference is supposed to be caused by the constraint of the material flow under plane strain condition.     

2D Superlattices for Efficient Energy Storage and Conversion

2D genuine unilamellar nanosheets, that are, the elementary building blocks of their layered parent crystals, have gained increasing attention, owing to their unique physical and chemical properties, and 2D features. In parallel with the great efforts to isolate these atomic-thin crystals, a unique strategy to integrate them into 2D vertically stacked heterostuctures has enabled many functional applications. In particular, such 2D heterostructures have recently exhibited numerous exciting electrochemical performances for energy storage and conversion, especially the molecular-scale heteroassembled superlattices using diverse 2D unilamellar nanosheets as building blocks. Herein, the research progress in scalable synthesis of 2D superlattices with an emphasis on a facile solution-phase flocculation method is summarized. A particular focus is brought to the advantages of these 2D superlattices in applications of supercapacitors, rechargeable batteries, and water-splitting catalysis. The challenges and perspectives on this promising field are also outlined.     

New type of pressurized cultivation method providing oxygen for piezotolerant yeast

For efficient oxygen supply to pressurized culture, we developed a method using a highly pressurized membrane reactor with an air-saturated medium circulation system. The new method increased the cell growth of aerobic yeast approximately 20 folds larger than that in the case of using a conventional method.     

Lithium silicon sulfide as an anode material in all-solid-state lithium batteries

The electrochemical properties of Li₂SiS₃ were investigated in a solid electrolyte. Li₂SiS₃ was converted to elemental Si, and the resultant Si was formed into Si-Li alloy in the reduction process; however, the reverse reaction was not completed due to the loss of electronic conduction upon reoxidation. FeS was dispersed as a conductive additive in Li₂SiS₃ films by pulsed laser deposition (PLD). The addition allowed successive reactions to proceed at a large capacity with small capacity-fading during the cycling process in spite of the small FeS fraction. This result indicates that Li₂SiS₃ + FeS thin film is a promising anode for solid-state lithium batteries.