Relationship between transition of fracture mode of carbon fiber-reinforced plastic and glass transition temperature of its resin

In this study, the correlation between the stress–strain behavior of a carbon fiber-reinforced plastic (CFRP) and the temperature at which the heat-affected zone (HAZ) is generated is investigated. First, CFRP ([?45/45]_2s laminate) specimens were heated at several temperatures to induce thermal damage, i.e. a HAZ. Subsequently, tensile tests were conducted on the specimens with thermal damage. Then, microscopy and X-ray measurements were carried out to discuss the stress–strain responses from a microscopic viewpoint. The results of strain measurement during thermal treatment indicated that the strain increases with increasing temperature. The tensile tests showed that the CFRP specimens subjected to thermal damage during heating at a high temperature fractured in the ductile mode, whereas the fracture mode of the CFRP specimens with low-temperature thermal damage was discontinuous. Microstructure observation using X-ray tomography showed that the debonding between the carbon fibers and the resin matrix induced by heating to above the glass transition temperature was responsible for the continuous fracture mode.     

Effect of chitosan-gluconic acid conjugate/poly(vinyl alcohol) cryogels as wound dressing on partial-thickness wounds in diabetic rats

We previously developed chitosan cryogels from chitosan-gluconic acid conjugate without using toxic additives for wound care. In this study, we improved physiological characteristics of the previous cryogels by incorporating poly(vinyl alcohol) that also form cryogels. Mechanical strength of the cryogels was more than two times higher than that of the previous cryogels. Furthermore, the incorporation of poly(vinyl alcohol) enhanced water retention and resistance to degradation of the gels by lysozyme. The cryogels retained the favorable biological properties of the previous cryogels that they accelerate infiltration of inflammatory cells into wound sites. Time period for repairing 50 % of initial area of partial-thickness skin wound treated with the cryogels (4.0 ± 1.1 days) was shorter than those with gauze (6.5 ± 0.3 days) or a commercial hydrogel dressing (5.7 ± 0.3 days). Finally, we confirmed that incorporation of basic fibroblast growth factor into the cryogels was effective to further accelerate wound healing (2.7 ± 1.0 days). These results demonstrate that the cryogels in this study are promising for wound care.     

Te concentration dependent photoemission and inverse-photoemission study of FeSe1?xTex

We have characterized the electronic structure of FeSe_1−xTe_x for various x values using soft x-ray photoemission spectroscopy (SXPES), high-resolution photoemission spectroscopy (HRPES) and inverse photoemission spectroscopy (IPES). The SXPES valence band spectral shape shows that the 2 eV feature in FeSe, which was ascribed to the lower Hubbard band in previous theoretical studies, becomes less prominent with increasing x. HRPES exhibits systematic x dependence of the structure near the Fermi level (E_F): its splitting near E_F and filling of the pseudogap in FeSe. IPES shows two features, near E_F and approximately 6 eV above E_F; the former may be related to the Fe 3d states hybridized with chalcogenide p states, while the latter may consist of plane-wave-like and Se d components. In the incident electron energy dependence of IPES, the density of states near E_F for FeSe and FeTe has the Fano lineshape characteristic of resonant behavior. These compounds exhibit different resonance profiles, which may reflect the differences in their electronic structures. By combining the PES and IPES data the on-site Coulomb energy was estimated at 3.5 eV for FeSe.     

Terrain classification and identification of tree stems using ground‐based LiDAR

To operate autonomously in forested terrain, unmanned ground vehicles must be able to identify the load‐bearing surface of the terrain (i.e., the ground) and obstacles in the environment. To travel long distances, they must be able to track their position even when the forest canopy obstructs GPS signals, e.g., by tracking progress relative to tree stems. This paper presents a novel, robust approach for modeling the ground plane and tree stems in forests from a single viewpoint using a lightweight LiDAR scanner. Ground plane identification is implemented using a two‐stage approach. The first stage, a local height‐based filter, discards most nonground points. The second stage, based on a support vector machine classifier, identifies which of the remaining points belong to the ground. Main tree stems are modeled as cylinders or cones to estimate the diameter 130 cm above the ground plane. To fit these models, candidate main stem data are selected by finding points approximately 130 cm above the ground. These points are clustered into separate point clouds for each stem. Cylinders and cones are fit to each point cloud, and heuristic filters identify which fits correspond to tree stems. Experimental results from five forested environments demonstrate the effectiveness of this approach. For ground plane estimation, the overall classification accuracy was 86.28% with a mean error for the ground height of approximately 4.7 cm. For stem estimation, up to 50% of the main stems were accurately modeled using cones, with a root mean square diameter error of 13.2 cm.© 2012 Wiley Periodicals, Inc.     

Investigation report of geotechnical disaster on river area due to typhoon landfall three times on Okhotsk region,Hokkaido, Japan

For one week from August 17 to 23, 2016, three consecutive typhoons made landfall in Hokkaido for the first time on record. These typhoons and the front they stimulated brought record-breaking torrential rain over the eastern part of Hokkaido. To investigate the damage to grounds and rivers resulting from this rainfall, the Japan Society of Civil Engineers (JSCE) and the Japanese Geotechnical Society (JGS) formed a disaster research group to conduct an investigation. This report provides the results of the investigation into damage to the grounds of areas along the Tokoro River of the Okhotsk region, Hokkaido, that suffered from this tremendous and diverse disaster. Specifically, the report describes the situation of the levees which were broken and eroded by the overflowing water, the shape of the levee bodies, the levee body soil properties examined by observation of the sections, as well as the occurrence of sand boiling and air blows. The washout of road embankments as well as damage to road bridge mounting fills and abutment backfills were also investigated. The investigation has demonstrated the need to clarify the resistance of the abutment backfills and levee bodies to flowing water as well as the geotechnical predominant factors in order to clarify the mechanisms behind erosion and washout, the need to review new measures that allow for the scale of sand boiling and resultant changes in levee body stability, and the fact that the existing embankments were able to temporarily suppress the flooding water which had spilled over from the river. Furthermore, although it has been identified that the findings of a study on an embankment washout associated with a tsunami can be applied to measures taken against the overflowing water, it has also been found necessary to clarify the predominant geotechnical factors using model tests and to use a more sophisticated analytical approach to establish a geotechnical stability review as soon as possible in order to prevent the levees and embankments from being eroded and washed out due to overflowing water.     

Polypropylene plasticization and photodegradation with a TiO2/poly(ethylene oxide)/methyl linoleate paint photocatalyst system

The photodegradation of polypropylene (PP) film was performed by a TiO₂/polyethylene oxide (PEO)/plant oil paint photocatalyst system. The photodegradation underwent two stages of development as follows: Initially PP reacted with linoleic acid radical originated from the photoreaction of plant oil component. Second, the linoleic acid graft‐polymer was decomposed, and then PP chain scission was caused. The process was studied using methyl linoleate (ML) in detail. The melting point of the 24 h‐photodegraded PP slightly decreased, and those of the 48 h‐ and 96 h‐ones drastically did as compared with the pristine PP. The crystallinity (χ_c) decreased at the 48 h photodegradation time and drastically increased at the 96 h one. The 24 h‐photodegraded PP showed the 77% Young's modulus, 88% tensile strength, and 103% strain at break values to those of the pristine PP. The ML graft‐polymerization and decomposition brought about the PP plasticizing and chemi‐crystallization, causing the PP degradation. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39909.     

Nucleotide sequences of alcohol acetyltransferase genes from lager brewing yeast,Saccharomyces carlsbergensis

The nucleotide sequences of alcohol acetyltransferase genes isolated from lager brewing yeast, Saccharomyces carlsbergensis have been determined. S. carlsbergensis has one ATF1 gene and another homologous gene, the Lg-ATF1 gene. There was a high degree of homology between the amino acid sequences deduced for the ATF1 protein and the Lg-ATF1 protein (75·7%), but the N-terminal region has a relatively low degree of homology. Southern analysis and contour-clamped homogeneous electric field analysis of Saccharomyces strains suggest that the ATF1 gene is located on chromosome XV in S. cerevisiae and that the Lg-ATF1 gene might originate from the ‘non-S. cerevisiae’ genome of S. carlsbergensis, which is similar to that of S. bayanus and S. pastorianus. The nucleotide sequence data reported in this paper will appear in the DDBJ, EMBL and GenBank data banks with the Accession Numbers D63449 (ATF1) and D63450 (Lg-ATF1).     

Deoxidation of Ti Melt by Newly Developed Two-Step Plasma Arc Melting Process Using Hydrogen

Metallurgical and Materials Transactions B - A two-step plasma arc melting process, comprising a first step under Ar-30 pct H2 gas flow and the second step under Ar gas flow, has been...     

Temperature- and pH-responsive photosensitization activity of polymeric sensitizers based on poly-N-isopropylacrylamide

We previously reported that a copolymer consisting of N-isopropylacrylamide (NIPAM) and benzophenone (BP) units, behaves as a photosensitizer showing temperature-controlled oxygenation activity in water (J. Am. Chem. Soc.2006, 128, 8751). This polymer shows a heat-induced oxygenation enhancement at low temperature region (5-20 °C), while showing a heat-induced oxygenation suppression at high temperature region (20-60 °C), resulting in an off-on-off activity profile against the temperature window. This is driven by a heat-induced phase transition of the polymer from coil to micelle and then to globule states. In the present work, effects of adding an amine component (N-[3-(dimethylamino)propyl]acrylamide: DMAPAM) to the polymer on the sensitization activity were studied, where the relationship between the phase transition behavior and the activity was clarified by several spectroscopic analyses. The polymers, poly(NIPAM_x-co-BP_y-co-DMAPAM_z), show activity controlled by temperature and pH. The off-on-off activity profile shifts to higher temperature with a pH decrease. This is because protonation of the DMAPAM units leads to an increase in the polymer polarity and, hence, the polymer aggregates at higher temperature. In addition, increase in the DMAPAM content of the polymer leads to further shift of the activity profile. In contrast, at pH < 8, no activity enhancement is observed because complete protonation of the DMAPAM units suppresses polymer aggregation.     

Enhanced Light Storage of SrAl2O4 Glass‐Ceramics Controlled by Selective Europium Reduction

A luminescent Eu, Dy: SrAl₂O₄ glass‐ceramics with high transparency in the visible region was successfully synthesized using the frozen sorbet technique with the control of O₂ partial pressure () for the oxidation of Eu²⁺ ions. The glass‐ceramics include Eu²⁺, Eu³⁺, and Dy³⁺ ions, and thus exhibits three characteristic types of emission bands, 4f–5d at around 520 nm (Eu²⁺ ions), 4f–4f at 610 nm (Eu³⁺ ions), and 480 nm (Dy³⁺ ions). The Eu, Dy: SrAl₂O₄ glass‐ceramics provide remarkable long‐persistent luminescence under dark condition. The glass‐ceramics also exhibits color‐changing luminescence in the visible region based on their remarkable light storage properties. The luminescent Eu, Dy: SrAl₂O₄ glass‐ceramics using the frozen sorbet technique with control of are promising materials for application in novel photonic and light storage materials.