Discrimination of psychoactive fungi (commonly called "magic mushrooms") based on the DNA sequence of the internal transcribed spacer region

'Magic mushrooms' (MMs) are psychoactive fungi containing the hallucinogenic compounds, psilocin (1) and psilocybin (2). Since June 6, 2002, these fungi have been regulated by the Narcotics and Psychotropics Control Law in Japan. Because there are many kinds of MMs and they are sold even as dry powders in local markets, it is very difficult to identify the original species of the MMs by morphological observation. Therefore, we investigated the internal transcribed spacer (ITS) region in the ribosomal RNA gene of MMs obtained in Japanese markets to classify them by a genetic approach. Based on the size and nucleotide sequence of the ITS region amplified by PCR, tested MMs were classified into 6 groups. Furthermore, a comparison of the DNA sequences of the MMs with those of authentic samples or with those found in the databases (GenBank, EMBL and DDBJ) made it possible to identify the species of tested MMs. Analysis by LC revealed that psilocin (1) was contained at the highest level in Panaeolus cyanescens among the MMs, but was absent in the Amanita species.     

Novel vitamin E derivative with 4-substituted resorcinol moiety has both antioxidant and tyrosinase inhibitory properties

A novel vitamin E derivative, (6″-hydroxy-2″,5″,7″,8″-tetramethylchroman-2″-yl) methyl 3-(2′,4′-dihydroxyphenyl)propionate (TM4R), which has a chromanoxyl ring and 4-substituted resorcinol moieties, was synthesized; and its inhibitory effects on tyrosinase, antioxidant ability, and lightening effect of ultraviolet B (UVB)-induced hyperpigmentation were estimated. TM4R showed potent inhibitory activity on tyrosinase, which is the rate-limiting enzyme in melanogenesis. The scavenging activities of TM4R on 1,1-diphenyl-2-picrylhydrazyl and hydroxyl radicals were found to be nearly the same as those of α-tocopherol. Furthermore, an efficient lightening effect was observed following topical application of TM4R to UVB-stimulated hyperpigmented dorsal skin of brownish guinea pigs. These results suggest that TM4R may be a candidate for an efficient whitening agent, possibly by inhibiting tyrosinase activity and biological reactions caused by reactive oxygen species.     

A new algorithm for packet routing problems using chaotic neurodynamics and its surrogate analysis

We propose a new algorithm for routing packets which effectively avoids packet congestion in computer networks. The algorithm involves chaotic neurodynamics. To realize effective packet routing, we first composed a basic method by a neural network, which routes packets with shortest path information between two nodes in the computer network. When the computer network has an irregular topology, the basic routing method does not work well, because most of packets cannot be transmitted to their destinations due to packet congestion in the computer network. To avoid such an undesirable problem, we employed chaotic neurodynamics to extend the basic method. Numerical experiments show that our proposed method exhibits good performance for scale-free networks. We also analyze why the proposed routing method is effective, comparing the proposed method with several stochastic methods. We introduced the method of surrogate data, a statistical hypothesis testing which is often used in the field of nonlinear time-series analysis. Analysis of the proposed method by the method of surrogate data reveals that the chaotic neurodynamics is most effective to decentralize the packet congestion in the computer network.     

A New Segment Quantization Using Lempel–Ziv Algorithm and Its Application to Quantization of Line Spectral Frequencies

A new segment quantization method using the Lempel-Ziv algorithm is proposed, and it is applied to quantize line spectral frequency parameters in speech codec. The proposed segment quantizer can save four bits per frame, compared with the ITU-T G.729 speech codec (18 bits/frame), without degradation of subjective or objective speech quality     

Application to cleaning of waste plastic surfaces using atmospheric non-thermal plasma jets

The removal of paint on the surface of waste plastics is difficult by the conventional process; in this research, a new cleaning mechanism using atmospheric plasmas was examined through optical emission spectroscopy, electron spectroscopy for chemical analysis, and scanning electron microscopy. Results indicate that an increase of pulse frequency enables for a short processing time for the removal of the paint film, signifying that the production of radicals in plasma, especially oxygen radicals, can be controlled by pulse frequency.Plasma jets were generated under the experimental conditions of an input power of 250 W to 400 W, a pulse frequency of 2 kHz to 12 kHz, and a plasma gas flow rate of 30 L/min. Examination of the intensity ratio of the reactive species, as measured by emission spectroscopy, showed that the O/N value increased with an increase in pulse frequency. Results of analysis with electron spectroscopy for chemical analysis show that nitrogen atoms and molybdenum in only the paint film decreased through plasma processing.     

Role of plasticity on interface crack initiation from a free edge and propagation in a nano-component

In order to elucidate the role of plasticity on interface crack initiation from a free edge and crack propagation in a nano-component, delamination experiments were conducted by a proposed nano-cantilever bend method using a specimen consisting of ductile Cu and brittle Si and by a modified four-point bend method. The stress fields along the Cu/Si interface at the critical loads of crack initiation and crack propagation were analyzed by the finite element method. The results reveal that intensified elastic stresses in the vicinity of the interface edge and the crack tip are very different, although the Cu/Si interface is identical in both experiments. The plasticity of Cu was then estimated on the basis of the nano-cantilever deflection measured by in situ transmission electron microscopy. The plasticity affects the stress fields; the normal stress near the interface edge is intensified while that near the crack tip is much reduced. Both the elasto-plastic stresses are close to each other in the region of about 10 nm. This suggests that the local interface fracture, namely, the crack initiation at the interface edge and the crack propagation along the interface, is governed by elasto-plastic normal stress on the order of 10 nm.     

Microprocessors in electric power systems

The present status of microprocessor applications in various fields of electric power systems is summarized. Special attention is directed towards development trends in the protection field where microprocessor applications are expected to cope with the increasingly stringent requirements for electric power supply reliability. Also discussed are the history, roles, design philosophy and basic schemes of microprocessor-based protective relaying systems. Only recently has their application reached a practical stage after long-term study and repeated field tests.     

Fast and selective cell isolation from blood sample by microfiber fabric system with vacuum aspiration

Since circulating tumor cells (CTCs) are tumor cells which are found in the blood of cancer patients, CTCs are potential tumor markers, so a rapid isolation of CTCs is desirable for clinical applications. In this paper, a three-dimensional polystyrene (PS) microfiber fabric with vacuum aspiration system was developed for capturing CTCs within a short time. Various microfiber fabrics with different diameters were prepared by the electrospinning method and optimized for contact frequency with cells. Vacuum aspiration utilizing these microfiber fabrics could filter all cells within seconds without mechanical damage. The microfiber fabric with immobilized anti-EpCAM antibodies was able to specifically capture MCF-7 cells that express EpCAM on their surfaces. The specificity of the system was confirmed by monitoring the ability to isolate MCF-7 cells from a mixture containing CCRF-CEM cells that do not express EpCAM. Furthermore, the selective capture ability of the microfiber was retained even when the microfiber was exposed to the whole blood of pigs spiked with MCF-7 cells. The specific cell capture ratio of the vacuum aspiration system utilizing microfiber fabric could be improved by increasing the thickness of the microfiber fabric through electrospinning time.     

Cloud detection for the Far East region using NOAA AVHRR images

A new automatic cloud detection method to process the large data sets required for long-term trends in AVHRR time series images is described and tested over the Far East region. In the cloud detection method, a simple NDVI test was used to roughly separate land from ocean. After the NDVI test we carried out two tests: a visible or near-infrared test and an infrared test. Results from the cloud detection method over the Far East region are presented. In order to assess the cloud detection method, a comparison was carried out between the method presented and the Saunders and Kriebel daytime procedure using the N-Land database. We found that in general, the method presented has better performance than the Saunders and Kriebel procedure by about 0.5% to 10.5%.     

Temperature measurement at flip chip solder joint during electromigration test

Measuring the real temperature of a flip chip solder joint during an electromigration test has been a problem because of its small size and the local Joule heating due to a large applied current. A unique method that employs the electrical resistance change in the junction line between two solder joints was introduced to determine the temperature of the solder joint. The change in resistance was converted into temperature using a thermal coefficient of resistance of the junction line. The method accurately measured temperatures of the solder joint within 2 K until the solder joint resistance change ratio reached 100% due to growth of an electromigration void.