Development of cable fault location method using fiber optic distributed temperature sensor

When ground-fault problems occur on a cable line, immediate fault location and restoration are required. Therefore, various new methods to locate the fault point instantaneously have been investigated to replace such conventional methods as the Murray loop method and the pulse radar method [1]. These methods require a long time to locate the fault point. One possible fault location method is to sense the temperature rise following a ground fault using a fiber optic distributed temperature sensor. Application of this method was found feasible through sensing the temperature rise at a ground-fault test using a thermocouple as a temperature sensor with test cables [4]. A power/optical composite cable was prepared experimentally and after verifying its thermal mechanical performance, the temperature rise at an incidence of a fault was determined and the anticipated performance was demonstrated in a ground-fault test. This article describes the outline of the test.     

Model analysis of enzyme monolayer- and bilayer-modified electrodes: the steady-state response.

The steady-state sensor responses of enzyme monolayer- and heterobilayer-modified electrodes were theoretically analyzed with a simple model. Parameters used here are the surface coverage and rate constants of the enzyme, the concentrations and diffusion coefficients of the substrate and mediator, the rate constant of the electrode process, the thickness of the diffusion layer, and the distance between the enzyme and electrode. The sensor response was divided into three factors; the efficiencies of substrate and mediator supply to the enzyme, the enzyme/electrode charge-transfer efficiency, and the potential rate of enzymatic reaction where the supply efficiencies are unity. Contributions of the parameters to these factors or the total sensor response are described by simple formulas. The experimental observations are successfully interpreted in terms of these theoretical results.     

Stress intensity factors of microstructurally small crack

The stress intensity factor (SIF) is widely used for evaluating integrity of cracked components. Averaging the anisotropy of each crystal, the macroscopic behavior of polycrystalline materials is isotropic and homogenous in terms of elastic deformation. However, the anisotropic and/or inhomogeneous property influences on the stress field around a crack if the crack size is small in comparison with the grain. Thus, the SIF of the microstructurally small crack may differ from that in the isotropic body. In present study, the effect of anisotropic/inhomogeneous elasticity on the SIF is investigated by using the finite element analysis (FEA). At first, the SIFs of semi-circular crack in a single crystal and a polycrystalline material are calculated. These reveal that the magnitude of SIF is dependent not only on the crystal orientation but also on the deformation constraint by the neighboring crystals. Then, the statistical scatter of SIF due to the random orientation of crystal orientation in a polycrystal is examined by a Monte Carlo simulation.     

Coherence-Based 3-D and Spectral Imaging and Laser-Scanning Microscopy

The basics of three-dimensional (3-D) and spectral imaging techniques that are based on the detection of coherence functions and other related techniques are reviewed. The principle of the 3-D source retrieval is based on understanding the propagation law of optical random field through the free space. The 3-D and spectral information are retrieved from the cross-spectral density function of optical random field or numerical calculation of the inverse propagation of the cross-spectral density. We will first introduce the coherence-based spectral tomography techniques with low-coherence light sources. These techniques limit their scheme of coherence detection only along the optical axis and some of them achieve simultaneously the high resolution and high speed of detection taking advantage of an imaging lens. We then provided explanations of the principle of 3-D source retrieval that is based on the propagation law of optical random field through the free space along with the introduction of the numerical holography and computed tomography techniques. We will lastly show 3-D spectral imaging schemes with the concurrent laser-scanning cross-sectioning techniques: one is the confocal laser scanning microscopy and the other is the two-photon laser-scanning fluorescence microscopy.     

Temperature Dependence of the Raman Spectrum in Lithium Oxide Single Crystal

Temperature dependence of the Raman spectrum of lithium oxide single crystal has been measured over a temperature range of 80 to 1073 K. The frequency shift and the line width of the Raman spectrum in lithium oxide were about 531 and 4.5 cm^-1 at 80 K, respectively. At 1073 K, the frequency shift and the line width attained the values of 464 and 112 cm^-1, respectively. The strong temperature dependence of the frequency shift and line width was compared with data from some crystals with a fluorite structure.     

REM sleep deprivation potentiates the effects of imipramine and desipramine but not that of clomipramine in the forced swimming test

The human amnestic syndrome associated with lesions of the hippocampus and amygdala is characterized by a selective impairment of recent (explicit, episodic) memory. Benzodiazepine (BZ) treated normal subjects demonstrate similar, marked impairments in episodic memory, but in addition, BZ also induces sedation and inattention. Thus, the amnestic effects of BZ may be secondary to drug-induced sedation. However, when subjects were pretreated with the specific BZ receptor antagonist, flumazenil, the sedative and attentional effects of diazepam were blocked, but a marked impairment in episodic memory still occurred. This demonstrates that, using neuropharmacological methods, it is possible to produce a dissociation of memory impairment from inattention and sedation. Such distinct patterns of cognitive dysfunction may serve as models for clinical cognitive syndromes.     

Effective sludge solubilization treatment by simultaneous use of ultrasonic and electrochemical processes.

Sludge disintegration treatment by using simultaneously ultrasonic irradiation and electrolysis was investigated experimentally. A lab-scale diaphragm cell irradiated with ultrasound at a constant oscillating frequency of 20 kHz was used as a reactor. The batch experiments were carried out under different conditions of electric outputs of the ultrasonic generator, electric current for the electrolysis and different initial SS concentrations. A simultaneous treatment in the cathodic compartment without any chemical doses considerably facilitated the sludge solubilization, compared to the sonication alone. An increase in the electric current up to 400 mA under a constant ultrasonic density decreased the specific energy by 55% within the experimental range. The specific energy consumption was also reduced when the initial SS concentration increased. In addition, before carrying out the simultaneous treatment, a brief electrolysis was effective for further reduction of the specific energy and the acceleration of soluble COD generation.     

Changes in the thermomechanical behavior of epoxy glasses under the state of strain aging

Changes in thermomechanical behavior with structural relaxation taking place in epoxy glasses were studied. Differential scanning calorimetry measurements and thermostimulated strain recovery tests were performed for specimens deformed and then aged under fixed strain. In the course of heating, the specimens started to absorb thermal energy, whereas plastic strain was still stable. At higher temperatures, plastic strain started recovery, which was accompanied by exothermic behavior of the specimen. With an increase in the aging duration, the endothermic peak signified and moved to a higher temperature. These results indicated that the longer the aging duration was, the harder the plastic strain and strain energy were frozen in the glassy structure. This freeze‐strain phenomenon was observed for crosslinked epoxy glass, as well as polymeric glasses with linear molecular structures, aged under strain. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Roles of the JAK-STAT system in signal transduction via cytokine receptors

JAK-STAT signaling pathways are known to play an essential role in the specific activation of interferon-inducible genes. Many cytokines interacting with the cytokine receptor superfamily also appear to activate these pathways. Recent evidence indicates that JAKs play an essential role(s) in cytokine receptor signaling, including both specific pathways linked to STATs and general pathways regulating cell growth and functions.     

Surgical treatment of ventricular tachycardia after surgical repair of tetralogy of Fallot. Relation between intraoperative mapping and histological findings

BACKGROUND: The mechanism of ventricular tachycardia (VT) after correction of tetralogy of Fallot (TF) is poorly understood. The purpose of this study was to examine the histopathology of the arrhythmogenic area detected by intraoperative mapping. METHODS AND RESULTS: The patients were three men who underwent radical surgery for TF at age 3, 3, or 5 years, respectively. VT developed at 8, 9, or 11 years, respectively, after surgery, and shock developed during VT in every case. The ECG revealed monomorphic VT in two cases and polymorphic VT in one case. Induction of VT resulted in a wide left-axis deviation-pattern QRS with cycle lengths varying between 260 and 330 milliseconds. The VT origin was identified at the right ventricular outflow tract (RVOT). A radical operation was performed with the patient under cardiopulmonary bypass. On epicardial mapping, delayed activation of the RVOT was recorded during sinus rhythm, and clockwise circus movement of the macroreentry current during VT on the right ventricular free wall was documented in each case. The VTs were treated successfully by surgical resection and cryoablation of the myocardium. In every patient, histology of the myocardial specimens showed degeneration, adiposis, fibrosis, inflammatory cell infiltration, and scattered myocyte islets. These lesions corresponded anatomically to the area of myocardium in which delayed activation was evident during epicardial mapping. CONCLUSIONS: The results of this study indicate that patients with VT after radical correction of the TF have abnormal histopathological findings at the site of the prior right ventriculotomy scar. These lesions were noted within the region of delayed activation found during epicardial mapping and were found to be a part of the reentrant circuit.