Crystal structures of CdTi2O4(OH)2 and LaTiSbO6

The crystal structures of two PbSb₂O₆-type compounds containing titanium, CdTi₂O₄(OH)₂ and LaTiSbO₆ were refined by X-ray powder diffraction data. For both compounds structure refinements with the space group were successful and the R-factors were R_WP = 6.46% and R_P = 4.90% for CdTi₂O₄(OH)₂ and R_WP = 9.55% and R_P = 7.17% for LaTiSbO₆. These crystal structures were the same as that of the typical PbSb₂O₆-type compound in spite of the existence of protons in the interlayer or two different metal ions in the layer.     

A 557-mW, 2.5-Gbit/s SONET/SDH regenerator-section terminating LSIchip using low-power bipolar-LSI design

A regenerator-section terminating digital large-scale-integration chip for an STM-16 (2.5-Gbit/s synchronous optical network/synchronous digital hierarchy) regenerator has been developed using low-power bipolar technologies. The high-speed performance of bipolar devices enabled four or more chips, including a demultiplexer and a multiplexer, to be integrated into a single chip. The low-power dissipation of 557 mW, only about one-tenth that of previously reported chips, was achieved through the use of four design steps: one-chip integration architecture, power management, 2.5-V emitter-coupled logic, and power optimization     

Complete neurological recovery of an adult patient with type II citrullinemia after living related partial liver transplantation

Type II citrullinemia is an adult-onset hepatocerebral disease caused by a deficiency of argininosuccinate synthetase in liver. A 25-year-old Japanese man suddenly developed encephalopathy, showing disorientation and flapping tremor. Plasma concentrations of ammonia and citrulline were extremely high, and hepatic argininosuccinate synthetase activity was deficient. The patient's condition deteriorated rapidly in spite of intensive medications. Therefore, we performed a partial liver transplantation using a graft obtained from his healthy 61-year-old father. After surgery, his neurological symptoms soon disappeared and plasma levels of ammonia and citrulline were normalized within 3 months after operation. Type II citrullinemia is one fulminant form of various liver-based metabolic diseases, and immediate liver transplantation is necessary to rescue patients with this disease. As liver transplantation from cadaveric donor is still not possible in Japan, it seems justifiable to use living related partial liver transplantation for our patient.     

Inhibitory activities of gatifloxacin (AM-1155), a newly developed fluoroquinolone, against bacterial and mammalian type II topoisomerases

We determined the inhibitory activities of gatifloxacin against Staphylococcus aureus topoisomerase IV, Escherichia coli DNA gyrase, and HeLa cell topoisomerase II and compared them with those of several quinolones. The inhibitory activities of quinolones against these type II topoisomerases significantly correlated with their antibacterial activities or cytotoxicities (correlation coefficient [r] = 0.926 for S. aureus, r = 0.972 for E. coli, and r = 0.648 for HeLa cells). Gatifloxacin possessed potent inhibitory activities against bacterial type II topoisomerases (50% inhibitory concentration [IC50] = 13.8 microg/ml for S. aureus topoisomerase IV; IC50 = 0.109 microg/ml for E. coli DNA gyrase) but the lowest activity against HeLa cell topoisomerase II (IC50 = 265 microg/ml) among the quinolones tested. There was also a significant correlation between the inhibitory activities of quinolones against S. aureus topoisomerase IV and those against E. coli DNA gyrase (r = 0.969). However, the inhibitory activity against HeLa cell topoisomerase II did not correlate with that against either bacterial enzyme. The IC50 of gatifloxacin for HeLa cell topoisomerase II was 19 and was more than 2,400 times higher than that for S. aureus topoisomerase IV and that for E. coli DNA gyrase. These ratios were higher than those for other quinolones, indicating that gatifloxacin possesses a higher selectivity for bacterial type II topoisomerases.     

Baseband Feedback Frequency-Division Multiplexing with Low-Power dc-SQUIDs and Digital Electronics for TES X-Ray Microcalorimeters

We are developing frequency-division multiplexing (FDM) systems with baseband feedback for TES X-ray microcalorimeter arrays for use with the DIOS mission. To meet the requirement of limited cooling capacity at cryogenic temperatures, we developed low-power and FDM-optmized dc-SQUIDs. To make maximum use of the SQUIDs, we also developed digital electronics using FPGA evaluation boards and ADC/DAC FMC daughter cards, and evaluated signal-to-noise ratios and gain-bandwidth products.     

Radiation Tolerance Evaluation of the Ti/Au Bilayer TES Microcalorimeter

We have developed Ti/Au bilayer transition-edge sensor (TES) microcalorimeters for future X-ray astrophysical satellite missions such as DIOS. One possible concern on the space use of TES microcalorimeters is its radiation tolerance. We have evaluated the performance of a Ti/Au bilayer (30/40 nm thick) TES microcalorimeter with 1.5  \(\upmu \) m thick Au absorber, before and after irradiation of 150 MeV proton beam with a total dose of 10 krad, corresponding to 10 years in the low Earth orbit. No significant changes on transition temperature, sensitivity, normal resistance, and critical current were observed. The energy resolution for 5.9 keV X-rays was 5.6  \(\pm \)  0.3 eV (FWHM) after the irradiation, which was slightly worse than 5.1  \(\pm \)  0.3 eV before the irradiation. We consider that our TES has sufficient radiation tolerance in orbit.     

Study on Heat Transfer and Flow Characteristic Under Phase-Change Process of an Acoustically Levitated Droplet

Acoustic levitation is one of the levitation technique which is expected to be used for analytical chemistry and manufacturing new materials. Thus, it is important to gather the knowledge about acoustically levitated droplet. The purpose of this study is to investigate the heat transfer and flow behavior under phase change process of an acoustically levitated droplet. The following results were obtained from experiments. Evaporation process and external flow structure of the levitated droplet is visualized by a high speed camera and it is found that they differ by the type of fluid. Toroidal vortices are observed near the surface of the ethanol solution droplet. Heat transfer coefficient is estimated from the volume change and temperature gradient. It is substantially higher than that estimated by the existing experimental correlation.     

Fabrication of 5.8‐in. OTFT‐driven flexible color AMOLED display using dual protection scheme for organic semiconductor patterning

Abstract— A 5.8‐in. wide‐QQVGA flexible color active‐matrix organic light‐emitting‐diode (AMOLED) display consisting of organic thin‐film transistors (OTFTs) and phosphorescent OLEDs was fabricated on a plastic film. To reduce the operating voltage of the OTFTs, Ta₂O₅ with a high dielectric constant was employed as a gate insulator. Pentacene was used for the semiconductor layer of the OTFTs. This layer was patterned by photolithography and dry‐etched using a dual protection layer of poly p‐xylylene and SiO₂ film. Uniform transistor performance was achieved in the OTFT backplane with QQVGA pixels. The RGB emission layers of the pixels were formed by vacuum deposition of phosphorescent small molecules. The resulting display could clearly show color moving images even when it was bent and operated at a low driving voltage (below 15 V).