Fabrication of Functionally Graded SiO2‐Mo Material by Centrifugation and Floc‐Casting of Highly Concentrated Slurry

To fabricate functionally graded materials, a highly concentrated slurry of SiO₂‐Mo system was prepared and centrifugal force was applied in an attempt to achieve a graded composition. Subsequently, we formed a homogeneous green body with compositional gradation by floc‐casting at 80°C, which was then fired at 1750°C for 10 min in Ar. The sintered body had compositional ratios of SiO₂ and Mo as well as electrical conductivities that changed gradually along the direction of centrifugal force. The results demonstrate that centrifugation and control of slurry characteristics such as flocculation are effective in fabricating functionally graded SiO₂‐Mo materials.     

ADDUCT FORMATION OF β-DIKETONATO LANTHANOIDS(III) WITH CARBOXYLIC ACIDS HAVING HYDROXYL AND METHOXYL GROUPS

Adduct formation of 2-thenoyltrifluoroacetonato(tta) lantha-num(III), europium(III), and ytterbium(I II) with α-pheny 1 1 actic, α-methoxy phenyl acetic, salicylic, and o-methoxy benzoic acids in chloroform has been studied by solvent extraction technique. It has been found that 1anthanoid(111) chelates form more stable adducts with these carboxylic acids in the sequence: Yb(tta)₃ < Eu(tta) ₃ < La(tta) ₃. The adduct formation constants as well as the separation factors obtained as the ratio of the constants between a pair of metals are the largest for α-phenyl lactic acid among these acids. The characteristics with α-phenyl 1actic acid would be caused by the action as bidentate unlike benzoic acid derivatives which work as monodentates owing to the internal complexa-tion through hydrogen bonding.     

Chemical modification of polynorbornene: transformation of ester moiety containing polynorbornene to carboxylic acid structure

Polynorbornene (PNB) having methyl ester in side chain was partially hydrolyzed under alkaline condition in mixed organic solvents containing tetramethylammonium hydroxide as a base. Through hydrolysis of methyl ester group in PNB under basic condition, PNB having carboxylic acid can be obtained and degree of hydrolysis (DH) were evaluated by ¹H NMR measurement from 0.1 to 0.8, depending upon reaction conditions such as reaction time, solvent, and amount of base. The resulting hydrolyzed PNB were characterized by differential scanning calorimetry, Fourier transform infrared spectroscopy, and size exclusion chromatography. No remarkable decreasing of molecular weight was observed and chain scission does not occur during the hydrolysis of PNB in the reaction condition examined here. The glass transition temperature of hydrolyzed PNB increased with increase in DH which can be attributed to the existence of intermacromolecular association of carboxylic acid in hydrolyzed PNB. Esterification of PNB having carboxylic acid was also carried out by using alkyl halide and DBU.     

High thermal stable thermoplastic-thermosetting polyimide film by use of asymmetric dianhydride (a-BPDA)

In order to obtain thermoplastic (before curing) and thermosetting (after curing) polyimides with high T_g for adhesive film, we prepared novel polyimides having phenylethynyl group in the side chain (44% of concentration of curing group) from asymmetric 2,3,3′,4′-biphenyltetracarboxylic dianhydride (a-BPDA), 3,4′-oxydianiline (3,4′-ODA) or 1,3-bis(4-aminophenoxy)benzene (1,3,4-APB) or 1,3-bis(3-aminophenoxy)benzene (1,3,3-APB), and 2,4-diamino-1-(4-phenylethynylphenoxy)benzene (mPDAp). Among three kinds of polymer, uncured polyimide of a-BPDA/1,3,4-APB; mPDAp had rather high T_g (265 °C, DMA) and thermoplasticity (E′ drop>10³ at T_g). After curing reaction of phenylethynyl group, the T_g of the polyimide was increased dramatically (364 °C, DMA). The polyimide derived from 1,3,4-APB having less concentration of curing group (20%) was also prepared to improve further film flexibility and toughness.     

High-Temperature Oxidation at 1500° and 1600°C of SiC/Graphite Coated with Sol–Gel-Derived HfO2

Oxidation of SiC compositionally graded (SCGed) graphite coated with HfO₂ derived from HfCl₄ by a sol–gel process was performed at 1500° and 1600°C in a flowing gas mixture of Ar and O₂ (80/20 kPa). SCGed graphite was produced by reaction of graphite with either molten Si or SiO gas at 1450°C. The sol–gel-derived HfO₂ precursor was deposited on SCGed graphite by a dip-coating method. Isothermal and cyclic oxidation of uncoated- and HfO₂-coated SCGed graphite was studied by monitoring overall weight change using an electro-microbalance. Scanning electron microscopy with energy-dispersive X-ray analysis was used to observe the surfaces and cross-sections of the oxidized HfO₂-coated SCGed graphite. The formation of HfSiO₄ was confirmed on the outer layer of the oxidized sample, beneath which a thin silica layer was formed. The improved oxidation resistance of SCGed graphite by coating with HfO₂ is discussed on the basis of the formation of these two layers.     

A decision theoretic approach to change point estimation for binomial CUSUM control charts

Detecting when the process has changed is a classical problem in sequential analysis and is an important practical issue in statistical process control. This article is concerned about the binomial cumulative sum (CUSUM) control chart, which is extensively applied to industrial process control, health care, public health surveillance, and other fields. For the binomial CUSUM, a maximum likelihood estimator has been proposed to estimate the change point. In our article, following a decision theoretic approach, we develop a new estimator that aims to improve the existing methods. For interval estimation, we propose a parametric bootstrap procedure to construct the confidence set of the change point. We compare our proposed method with the maximum likelihood estimator and Page's last zero estimator in terms of mean squared error by simulations. We find that the proposed method gives more unbiased and robust results than the existing procedures under various parameter designs. We analyze jewelry manufacturing data for illustration.     

Properties of networks obtained by internal plasticization of epoxy resin with aromatic and aliphatic glycidyl compounds

In order to improve the fracture properties of p, p′-diaminodiphenylmethane-cured epoxy resin, various kinds of aromatic and aliphatic glycidyl compounds were investigated as a modifier at an amount of 30 wt %. Several compounds promoted the fracture toughness. In any glycidyl compounds, however, heat resistance was decreased by the modification. The dynamic mechanical properties of the modified epoxy resins were measured. The crosslinking density ρ was calculated from the theory of rubber elasticity, and the mechanical properties of the resins were discussed in regard to the crosslinking density. Tensile strength was scarcely affected by the crosslinking density. Elongation at break and Izod impact strength increased remarkably with decrease in crosslinking density. The fracture toughness K_Ic- increased with decrease in crosslinking density except at small ρ.     

Hydrodesulfurization activity of highly dispersed Co sulfide clusters prepared in zeolite cages

Zeolite-supported highly dispersed Co sulfide clusters are synthesized using Co(CO)₃ (NO) as a precursor. The amount of Co inCoS_x/zeolite anchored by a CVD technique increases as the Al/Si ratio of the zeolite increases, whereas the activity per Co atomdecreases for thiophene hydrodesulfurization (HDS). When an Na-exchanged USY zeolite is used, the Co sulfide catalyst shows a muchhigher HDS activity than a conventional Co—Mo/Al₂ O₃ catalyst. It is considered from XAFS and NO adsorption techniques that thehigh HDS activity of CoS_x/USY-Na is due to an extremely high dispersion of Co sulfide clusters. This revised version was published online in July 2006 with corrections to the Cover Date.