The Effect of Air Foam Inclusion on the Permeability and Absorption Properties of Light Weight Soil

Cement-treated clay with air foam, which is called Super Geo-Material (SGM), was developed to utilize dredged clay in an effective way. As SGM is mainly used at levels below the ground water table, water permeability and absorption properties of SGM will affect the durability of the material. In this research, the changes in SGM permeability and absorption as functions of the air foam fraction were investigated. First, permeability tests with triaxial apparatus and constant rate of consolidation tests were conducted on samples containing less than 10% of air foam by volume. From the results, air foam was found to be an impermeable medium in SGM. Secondly, a series of permeability tests and absorption tests were conducted for the SGM with different fractions of air foam while observing the specimen with a micro focus X-ray Computed Tomography (CT) scanner. The results showed that the permeability of SGM increased dramatically due to the appearance of interior water channels when the air foam fraction exceeded 30% by volume. The density distribution change and water absorbed zones of the specimens during absorption tests were estimated using the X-ray CT data. From these results, the air in the SGM was found to be progressively substituted with water from the surface to the inside of the specimen and the substituted zone expanded as it made its way to the specimen interior. The expansion velocity of the substituted zone was not affected by the coefficient of permeability but by the fraction of the air in the specimen.     

Development of tribo-simulator for hot stamping

Coefficients of friction were measured at elevated temperatures using a hot flat strip drawing test machine newly developed by the authors for the purpose of confirming the coefficients of friction used for the FEM simulation of hot stamping. To examine the functions of the tribo-simulator, the coefficients of friction are measured using hot rolling oil with an emulsion, which is supplied continuously, while varying the drawing speed, drawing pressure and temperature. From the experimental results, it was shown that the coefficient of friction in hot stamping can be measured using this tribo-simulator. The measured coefficients of friction can be used as values in the FEM simulation of hot stamping. Moreover, the tribological behavior at the interface between the die and strip in hot stamping can be evaluated from the coefficient of friction, because it is one of the quantitative values used to represent the tribological behavior between the die and blank.     

Methacrylate-based ionic liquid: radical polymerization/copolymerization with methyl methacrylate and evaluation of molecular weight of the obtained homopolymers

Azobisisobutyronitlite (AIBN)-induced free radical polymerization of a methacrylate-based ionic liquid monomer, 1-(2-methacryloxyethyl)-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (Met-IL) was carried out in a common organic solvent, N,N-dimethylformamide (DMF), and an ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (EMImTFSI). The molecular weight of the obtained poly(Met-IL) was evaluated by transforming it to non-ionic poly(methyl methacrylate) with hydrolysis of the imidazolium-salt-substituted pendant ester groups and methyl esterification. Radical copolymerization with methyl methacrylate (MMA) was also carried out in both DMF and EMImTFSI. Analysis of copolymer composition revealed that the reactivity of Met-IL was lower than that of MMA in both DMF and EMImTFSI solutions.     

Glare Generation Based on Wave Optics

This paper proposes a novel and general method of glare generation based on wave optics. A glare image is regarded as a result of Fraunhofer diffraction, which is equivalent to a 2D Fourier transform of the image of given apertures or obstacles. In conventional methods, the shapes of glare images are categorized according to their source apertures, such as pupils and eyelashes and their basic shapes (e.g. halos, coronas, or radial streaks) are manually generated as templates, mainly based on statistical observation. Realistic variations of these basic shapes often depend on the use of random numbers. Our proposed method computes glare images fully automatically from aperture images and can be applied universally to all kinds of apertures, including camera diaphragms. It can handle dynamic changes in the position of the aperture relative to the light source, which enables subtle movement or rotation of glare streaks. Spectra can also be simulated in the glare, since the intensity of diffraction depends on the wavelength of light. The resulting glare image is superimposed onto a given computer‐generated image containing high‐intensity light sources or reflections, aligning the center of the glare image to the high‐intensity areas. Our method is implemented as a multipass rendering software. By precomputing the dynamic glare image set and putting it into texture memory, the software runs at an interactive rate.     

Uniform carbon‐nanotube emitter for field‐emission displays

Abstract— The synthesis of carbon‐nanotube (CNT) field emitters for FEDs by thermal chemical vapor deposition (CVD) and their structural and emission characterization are described. Multi‐walled nanotubes (MWNTs) were grown on patterned metal‐base electrodes by thermal CVD, and the grown CNTs formed a network structured layer covering the surfaces of the metal electrode uniformly, which realized uniform distribution of electron emission. A technique for growing narrow MWNTs was also developed in order to reduce the driving voltage. The diameter of MWNT depends on the growth temperature, and it has changed from 40 nm at the low temperature (675°C) to 10–15 nm at the high temperature (900–1000°C). Moreover, narrower MWNTs were grown by using the metal‐base electrode covered with a thin alumina layer and a metal catalyst layer. Double‐walled nanotubes (DWNTs) were also observed among narrow MWNTs. The emission from the narrow CNTs showed a low turn‐on electric field of 1.5 V/μm at the as‐grown layer.     

Wearable vibrotactile systems for virtual contact and information display

This paper presents a development history of a wearable, scalable vibrotactile stimulus delivery system. This history has followed a path from desktop-based, fully wired systems, through hybrid approaches consisting of a wireless connection from the host computer to a body-worn control box and wires to each tactor, to a completely wireless system employing Bluetooth technology to connect directly from the host to each individual tactor unit. Applications for such a system include delivering vibrotactile contact cues to users of virtual environments, providing directional cues in order to increase situational awareness in both real and virtual environments, and for general information display in wearable contexts. Through empirical study, we show that even a simple configuration, such as eight tactors arrayed around the torso, can be effective in increasing situational awareness in a building-clearing task, compared to users who perform the same task without the added cues.     

Single-molecular AFM probing of specific DNA sequencing using RecA-promoted homologous pairing and strand exchange

The specific sequence in a linearlized double-stranded DNA target has been identified at a single-molecular level by atomic force microscopy (AFM). This was accomplished using RecA-coated, single-stranded DNA probes which were paired with a specific complementary DNA sequence in a linear double-stranded DNA target by strand-exchange reaction at a homologous sequence site with target DNA. The sites of interaction between the nucleoprotein filaments and the double-stranded DNA targets were directly visualized by AFM in solution containing 4 mM magnesium acetate. Measurements of the position of RecA-coated probes paired to individual target DNA showed that DNA probes specifically paired at their corresponding homologous target sequences. Strand exchange promoted by RecA and the visualization by AFM provided a rapid and efficient way to identify homologous sequence on a single-molecule target DNA.     

Mechanisms of reduction in hole concentration in Al-doped 4H-SiC by electron irradiation

From the temperature dependence of the hole concentration in unirradiated lightly Al-doped 4H-SiC epilayers, an Al acceptor with E_V + 0.2 eV, which is an Al atom (Al_Si) at a Si sublattice site, and an unknown deep acceptor with E_V + 0.35 eV are found, where E_V is the top of the valence band. Both the densities are similar. With irradiation of 0.2 MeV electrons the Al acceptor density is reduced, while the unknown deep acceptor density is increased. Judging from the minimum electron energy required to displace a substitutional C atom (C_s) or the Al_Si, the bond between the Al_Si and its nearest neighbor C_s is broken due to the displacement of the C_s by this irradiation. Moreover, the displacement of the C_s results in the creation of a complex (Al_Si-V_C) of Al_Si and a carbon vacancy (V_C), indicating that the possible origin of the deep acceptor with E_V + 0.35 eV is Al_Si-V_C.     

Dynein arms are oscillating force generators

Eukaryotic flagella beat rhythmically. Dynein is a protein that powers flagellar motion, and oscillation may be inherent to this protein. Here we determine whether oscillation is a property of dynein arms themselves or whether oscillation requires an intact axoneme, which is the central core of the flagellum and consists of a regular array of microtubules. Using optical trapping nanometry, we measured the force generated by a few dynein arms on an isolated doublet microtubule. When the dynein arms on the doublet microtubule contact a singlet microtubule and are activated by photolysis of caged ATP8, they generate a peak force of approximately 6pN and move the singlet microtubule over the doublet microtubule in a processive manner. The force and displacement oscillate with a peak-to-peak force and amplitude of approximately 2 pN and approximately 30 nm, respectively. The geometry of the interaction indicates that very few (possibly one) dynein arms are needed to generate the oscillation. The maximum frequency of the oscillation at 0.75 mM ATP is approximately 70 Hz; this frequency decreases as the ATP concentration decreases. A similar oscillatory force is also generated by inner dynein arms alone on doublet microtubules that are depleted of outer dynein arms. The oscillation of the dynein arm may be a basic mechanism underlying flagellar beating.