Silica films with a single-crystalline mesoporous structure

Films of mesoporous materials attract broad interest because of their wide applicability in the fields of optics and electronics. Although many of these films have a regular local porous structure, the structural regularity has not been used practically yet because of difficulties in its control on macroscopic scales. Here, we demonstrate the preparation of mesoporous silica films whose porous structure can be described as a single crystal, that is, a long-range order of cage-like pores is maintained over centimetre scales. These films have a three-dimensional hexagonal (space group P6(3)/mmc) porous structure, and the in-plane arrangement of the pores is strictly controlled by a polymeric substrate surface that has been treated by rubbing. This new class of single-crystalline films with mesoscopic periodic structure is a significant breakthrough in bottom-up nanotechnology, and could lead to novel devices, for example, optics in a soft X-ray region, and quantum electronics.     

Cartesian-structure analysis in cast films by advanced infrared multiple-angle incidence resolution spectroscopy

Multiple-angle incidence resolution spectroscopy (MAIRS) has been improved to be an advanced algorithm so that the Cartesian structure in organic thin films can be analyzed. The infrared MAIRS technique was originally proposed as a totally new spectroscopic technique to reveal structural anisotropy in thin films on an infrared-transparent substrate, which yields both in-plane- (IP; X and Y) and out-of-plane (OP; Z)-mode spectra from an identical sample. Since this technique employs an analytical concept based on a signal decomposition of light intensity (not absorbance spectra), the algorithm intrinsically has high potential for further development. In the present study, the theoretically deduced matrix that correlates the light intensity to the angle of incidence has been modified to further decompose the IP-mode spectrum into X and Y components. As a result, anisotropic measurements of infrared spectra of thin film have become possible for the X, Y, and Z directions (Cartesian coordinate) simultaneously. With this advanced algorithm, the Cartesian structural changes in a cast film prepared on a germanium substrate have readily been analyzed, and a change from the biaxial to the uniaxial film structure with aging has spectroscopically been revealed.     

A teaching method using a self-organizing map for reinforcement learning

We described a new preteaching method for re-inforcement learning using a self-organizing map (SOM). The purpose is to increase the learning rate using a small amount of teaching data generated by a human expert. In our proposed method, the SOM is used to generate the initial teaching data for the reinforcement learning agent from a small amount of teaching data. The reinforcement learning function of the agent is initialized by using the teaching data generated by the SOM in order to increase the probability of selecting the optimal actions it estimates. Because the agent can get high rewards from the start of reinforcement learning, it is expected that the learning rate will increase. The results of a mobile robot simulation showed that the learning rate had increased even though the human expert had showed only a small amount of teaching data. This work was presented in part at the 7th International Symposium on Artificial Life and Robotics, Oita, Japan, January 16–18, 2002     

Efficient power coupling using taper-ended multimode optical fibres

Highly efficient power coupling of up to 97% between a d.h. laser and a multimode step-index fibre is demonstrated by employing a tapered fibre launcher. Also, it is shown theoretically that a tapered end increases the effective numerical aperture of a fibre. For a Lambertian emitter, the use of a taper launcher permits the maximum coupling efficiency allowed by the Liouville theorem.     

Purification, bacteriolytic activity, and specificity of beta-lytic protease from Lysobacter sp. IB-9374

Lysobacter sp. IB-9374, which was isolated from soil as a high lysyl endopeptidase-producing strain (Chohnanet al., FEMS Microbiol. Lett., 213, 13-20, 2002), was found to produce a beta-lytic protease capable of lysing gram-positive bacteria such as Staphylococcus aureus, Microccocuseus, and Bacillus subtilis. The Lysobacter strain secreted the beta-lytic protease into the culture medium at a 2.4-fold higher level than Achromobacter lyticus. The enzyme was highly purified through a series of six steps with a high yield. The enzyme was strongly inhibited by tetraethylene-pentamine and 1,10-phenanthroline. The purified enzyme lysed more efficiently almost all the gram-positive bacteria tested than lysozyme, lysostaphin, and mutanolysin. The enzyme was very similar to Achromobacter beta-lytic protease containing one zinc atom in terms of amino acid composition and N-terminal sequence. The nucleotide sequence revealed that the mature enzyme was composed of 179 amino acid residues with additional 198 amino acids at the amino-terminal end of the enzyme. The deduced amino acid sequence of the mature enzyme coincided with that of the Achromobacter enzyme, although the prepro-region showed a 41% sequence identity with the counterpart. These results indicate that Lysobacter sp. is a useful strain for an efficient large-scale preparation of beta-lytic protease capable of lysing bacteria.     

A spherical aberration-corrected 200 kV TEM

A spherical aberration (Cs)-corrected 200 kV TEM was newly developed. The column of the microscope was extended by 25 cm and the inner yoke of the objective lens was modified to insert some parts of the corrector elements. The corrector has two hexapole elements that play a main role in Cs correction and they are placed at a position equivalent to the coma-free point of the objective lens by using two transfer doublet lenses. The Cs correction was successfully carried out by means of the third-order aberration that was generated in the two extended hexapoles. The Cs can be corrected to the desired value and also can be overcompensated in order to produce a negative Cs, as with the corrected Cs of -23 microm shown in this work. The optical system of the corrector does not produce second- and fourth-order aberrations, and can correct residual aberrations up to the third order. All of the corrector elements are computer-controlled and the third-order aberrations are quite stable after they are properly corrected. The resolution of 0.135 nm was experimentally confirmed by the Young's fringe method. Image simulations of a silicon [110] single crystal were made with various Cs and defocus values to demonstrate the effectiveness of arbitral control of Cs.     

Mechanistic study on analyte focusing by dynamic pH junction in capillary electrophoresis using computer simulation

Dynamic pH junction is an on-line preconcentration method in capillary electrophoresis (CE) based on electrokinetic focusing of weakly ionic analytes with in large sample volumes in a multisection electrolyte system. In this report, experiments and computer simulations were performed to gain a better insight of the analyte focusing mechanism when a dynamic pH junction was used. A computer program, SIMUL, was used to simulate the band-narrowing process of a group for phenol derivatives under optimized buffer conditions, which were compared with experimental results. Computer simulations revealed the formation of a sharp moving pH boundary within the sample zone causing efficient focusing of long plugs of weakly acidic analytes based on their pKa. These studies offered useful information for understanding the band-narrowing process by control of the depth and lifetime of the moving pH boundary as a function of analyte pKa, sample pH, and injection length. The change in pH of the sample within the capillary was also estimated by measuring the absorbances of an analyte at two different wave-lengths. Optimization of analyte focusing resulted in enhanced detection responses of about 60-450-fold in terms of peak heights for some phenol derivatives' relation to conventional injections. Dynamic pH junction represents a novel approach to control band dispersion (peak width) and selectivity (mobility) of specific analytes for high-resolution CE separations.     

Cautionary observations on preparing and interpreting brain images using molecular biology-based staining techniques

Though molecular biology-based visualization techniques such as antibody staining, in situ hybridization, and induction of reporter gene expression have become routine procedures for analyzing the structures of the brain, precautions to prevent misinterpretation have not always been taken when preparing and interpreting images. For example, sigmoidal development of the chemical processes in staining might exaggerate the specificity of a label. Or, adjustment of exposure for bright fluorescent signals might result in overlooking weak signals. Furthermore, documentation of a staining pattern is affected easily by recognized organized features in the image while other parts interpreted as "disorganized" may be ignored or discounted. Also, a higher intensity of a label per cell can often be confused with a higher percentage of labeled cells among a population. The quality, and hence interpretability, of the three-dimensional reconstruction with confocal microscopy can be affected by the attenuation of fluorescence during the scan, the refraction between the immersion and mounting media, and the choice of the reconstruction algorithm. Additionally, visualization of neurons with the induced expression of reporter genes can suffer because of the low specificity and low ubiquity of the expression drivers. The morphology and even the number of labeled cells can differ considerably depending on the reporters and antibodies used for detection. These aspects might affect the reliability of the experiments that involves induced expression of effector genes to perturb cellular functions. Examples of these potential pitfalls are discussed here using staining of Drosophila brain.     

The study of metal ion release and cytotoxicity in Co–Cr–Mo and Ti–Al–V alloy in total knee prosthesis – scanning electron microscopic observation

We surgically retrieved two cobalt(Co)–chromium(Cr)–molybdenum(Mo) and five titanium(Ti)–aluminum(Al)–vanadium(V) alloy knee prostheses from patients because of mechanical failure and pain. We examined the distribution of the small particles which were released from the Co–Cr–Mo and Ti–Al–V alloys using a backscattered scanning electron microscopy (SEM). In addition we analyzed the metals in the artificial knee joints and the tissues adjacent to them using energy dispersive X-ray spectroscopy (EDS). We demonstrated that a myriad of fine particles, produced by the abrasion of both Co–Cr–Mo and Ti–Al–V alloys, accumulated in the synovial cells. As Co–Cr–Mo alloys disintegrate easily in the cells, Co dissolves from the peripheral areas of them, although Cr remains within the cells. In contrast Ti–Al–V alloys are very stable in the synovial cells. From these findings we conclude that the Co–Cr–Mo alloys are hazardous to the body as the alloys release Co which enters the body. In contrast the Ti–Al–V alloys are very stable and are patently safer. Artificial joints, however, are still in considerable need of improvement.