Reconstitution of hepatic tissue architectures from fetal liver cells obtained from a three-dimensional culture with a rotating wall vessel bioreactor

Reconstitution of tissue architecture in vitro is important because it enables researchers to investigate the interactions and mutual relationships between cells and cellular signals involved in the three-dimensional (3D) construction of tissues. To date, in vitro methods for producing tissues with highly ordered structure and high levels of function have met with limited success although a variety of 3D culture systems have been investigated. In this study, we reconstituted functional hepatic tissue including mature hepatocyte and blood vessel-like structures accompanied with bile duct-like structures from E15.5 fetal liver cells, which contained more hepatic stem/progenitor cells comparing with neonatal liver cells. The culture was performed in a simulated microgravity environment produced by a rotating wall vessel (RWV) bioreactor. The hepatocytes in the reconstituted 3D tissue were found to be capable of producing albumin and storing glycogen. Additionally, bile canaliculi between hepatocytes, characteristics of adult hepatocyte in vivo were also formed. Apart from this, bile duct structure secreting mucin was shown to form complicated tubular branches. Furthermore, gene expression analysis by semi-quantitative RT-PCR revealed the elevated levels of mature hepatocyte markers as well as genes with the hepatic function. With RWV culture system, we could produce functionally reconstituted liver tissue and this might be useful in pharmaceutical industry including drug screening and testing and other applications such as an alternative approach to experimental animals.     

Application of electron beam for the reduction of PCDD/F emission from municipal solid waste incinerators

The electron-beam technology was applied to reduce the emission of polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF) in a flue gas of 1000 m(3)N/h from the municipal solid waste incinerator (MSWI) at a temperature of 200 degrees C. More than 90% decomposition of PCDD/Fs was obtained using an electron accelerator at a dose of 14 kGy. The decomposition was initiated through reactions with OH radicals produced by the irradiation of flue gases, followed by oxidation such as the ring cleavage of the aromatic ring, the dissociation of ether bond, and dechlorination. The cost analysis estimated that the electron-beam system can cut the annualized cost by approximately 50% for the treatment of PCDD/Fs in a pre-dusted MSWI flue gas as compared with a bag-filter system when operating on electricity generated from an incineration. Electron-beam technology is an economically and technologically useful method for reducing PCDD/Fs in an incineration flue gas.     

Investigation of pesticide residues in foods distributed in Kitakyushu City

We investigated 160 kinds of pesticide residues in 715 samples of 116 kinds of foods distributed in Kitakyushu city. Sixty kinds of pesticides were detected in 55 kinds of foods (204 samples) in the range of 0.002-22 mg/kg. Five kinds of pesticides in 7 samples violated the residue standards and the indication of "unused". The detection ratios of unregulated pesticide in domestic and imported foods were 27.8 and 33.0%, respectively. Iprodione, dicofol, diethofencarb, procymidone and chlorfenapyr (for domestic food) and total bromine, benomyl, chlorpyrifos, dicofol, fenvalerate, cypermethrin and dimethoate (for imported food) showed relatively high detection ratios. Chinese cabbage, garland chrysanthemum, tomatoes and green teas (domestic) and broccoli, bananas, grapefruit, lemons, oranges, frozen edamame and frozen kidney beans (imported) showed high relative pesticide detection ratios. Residual pesticides were detected with relatively high frequency in imported fruits, imported frozen foods and imported processed foods.     

Am1 MO Study of Benzene Nitro Derivatives

Molecular properties of benzene nitro derivatives were investigated by using semi-empirical MO calculations. As the results, the molecular structures and the rotational barrier of the nitro group calculated by AM1 showed a good agreement with the experimental values. The heats of formation in gaseous and condensed phases were obtained by considering isodesmic reactions. By this procedure, the heat of formation of hexanitrobenzene in solid phase was calculated to be +22.7 kcal/mol. The detonation parameters were also calculated by using four equations of state. The predicted detonation velocities showed a good agreement with the experimental values.     

Yield of OH radicals in water under heavy ion irradiation. Dependence on mass, specific energy, and elapsed time

Dependence of yields of OH （hydroxyl） radicals on the mass and specific energy of heavy ions and elapsed time after irradiation was investigated, to understand chemical reactions of aqueous solutions. The yields of irradiation products of phenol, super-linearly increased with the incident energy of He, C, and Ne ions ranging from 2 to 18 MeV/u. The yields of the OH radicals were estimated by analyzing the yields of the irradiation products of phenol. The yields of the OH radicals increased with the specific energy for each ion, but decreased both with the mass of each ion at the same specific energy and elapsed time after irradiation.     

Mechanical properties of drawn poly(methyl methacrylate) filled with ultrafine particles

The elastic and yield properties of drawn poly(methyl methacrylate) (PMMA) filled with ultrafine SiO₂ are described as functions of filler content and size. The drawn PMMA composites were made by uniaxially drawing to x4.0 at 100°C and at a rate of 20 mm/min. Four compliance values, i.e., S₃₃, S₁₁, S₁₃, and S₄₄ were determined. These values decreased with filler content and decreasing filler size. The relative compliance values S^de/S^do(S^de is the compliance of drawn PMMA composites and S^do is that of drawn unfilled PMMA) are almost equivalently changed with changes in filler content. The elastic properties of drawn PMMA composites are thus reinforced isotopically. This is characteristic of PMMA which has a large side group. The yield behavior of drawn PMMA composites have similar filler size and content dependence to those of elastic properties except that the transverse yield stresses become more brittle with filler content. The anisotropy in yield stress is relatively larger than that of elastic properties. This is probably because the anti-reiforcing effect, such as fibrillation becomes prominent with increasing filler content in the perpendicular direction.     

Fabrication of octacalcium phosphate block through a dissolution-precipitation reaction using a calcium sulphate hemihydrate block as a precursor

Although octacalcium phosphate (OCP) powder and a collagen/gelatin composite demonstrate good potential as bone substitutes, an OCP block has not been fabricated to date. In this study, the feasibility of fabricating an OCP block was evaluated through a dissolution-precipitation reaction using a calcium sulfate hemihydrate (CSH) block as a precursor. When the block was immersed in a phosphate salt solution, its composition changed to that of OCP, while its structure was maintained. The diametral tensile strength (DTS) of the OCP block was 1.0?±?0.2?MPa. The macroporosity and microporosity of the OCP block were 33.4?±?4.5% and, 69.0?±?1.6%, respectively. New bone attached well to the OCP block, and this block was partially replaced by bone 2 weeks after implantation. Four weeks after implantation, the surface of the OCP block was nearly covered with new bone and ~30% of the block was replaced by new bone, while no replacement by bone was observed in the case of a hydroxyapatite (HAp) block used as a control. It is concluded that OCP blocks are potentially suitable for their use as artificial bone substitutes.     

Thermal Response and Oxidation of Tyranno™-Fiber-Reinforced Si-Ti-C-O Matrix Composites for a Thermal Protection System in High-Enthalpy Dissociated Air

The thermal response and oxidation of Tyranno™ Lox-M fiber-reinforced Si-Ti-C-O matrix composites in high-enthalpy dissociated air was investigated in an arc jet facility (an arc wind tunnel). The maximum surface temperature reached 1310–1670°C. Catalytic recombination of oxygen and nitrogen on the composite surface under dissociated air was not significant. Surface recession was insignificant below 1600°C surface temperatures and above 5 kPa of oxygen partial pressure at the stagnation point. Passive-to-active oxidation transition of the composite agreed with Balat's theory for monolithic silicon carbide. A glass sealant prevented active oxidation of the composite for short-time exposures.     

Easy formation process of anatase-TiO2 coating layer strongly bonded to titanium metal surface

Because of the formation of a surface passive film (rutile TiO₂) on its surface layer, titanium metal shows adequate corrosion resistance. As the surface layer (passive film) of titanium metal is very stable, any functionalization of the titanium metal has been generally performed using relatively complicated methods. This is because any direct oxidation of titanium metal only leads to the formation of rutile TiO₂ over the entire temperature range. Chemical reactions using titanium chemicals can easily produce anatase TiO₂ at temperatures of ≤600°C. Using precursors is one of the ways of producing an anatase TiO₂ coating on titanium metal. However, in previous studies, anatase TiO₂ layers easily peeled off when they were used in flowing water. Herein, we describe a simple process for obtaining an anatase TiO₂ coating layer strongly bonded to the titanium metal surface. In our process, titanium metal was pretreated with a reducing agent to create a surface TiH₂ layer, whose condensation reaction easily proceeds with a precursor (composed of oxalic acid and tetra-butoxy titanium). Subsequently, the treated titanium metal was calcinated at 550°C in air to achieve strong bonding between the anatase TiO₂ coating layer and titanium metal surface. The treated titanium metal exhibited excellent photocatalytic activity.     

Effect of solid-state fermentation on select antinutrients and protein digestibility of cold-pressed and hexane-extracted canola meals

In this study, the effects of solid-state fermentation (SSF), including strain (Aspergillus niger NRRL 334 and A. oryzae NRRL 5590) and fermentation time (24, 48, and 72 h) on the nutritional value of cold-pressed (CP) and hexane-extracted (HE) canola meals were examined. SSF increased the protein content of both types of meals (from ~36% to ~40%) while reducing the oil content of CP meals (from ~12% to 9%). There was a significant reduction (~80%) in the phytic acid content of both types of meals after fermentation using either fungi. Overall, fermented samples showed a decrease in the total phenolic content from 2.7–3.1 to ~1.0 mg gallic acid equivalents (GAE)/g dry meal (DM) (a ~65% reduction), of which specifically the HE meal fermented with A. niger sample had the greatest decrease from 3.1 to 0.6 mg GAE/g DM (~81% reduction). Seventy-two hours of fermentation decreased the in vitro protein digestibility (IVPD) of A. oryzae fermented meals. In contrast, a shorter fermentation time (24 h) increased the IVPD for most samples as compared to the controls (from ~72%–73% to 77%–81%), with the exception of the CP meal fermented with A. niger which had similar IVPD at all fermentation times. Overall, the changes indicate that SSF using A. niger or A. oryzae can be useful to positively modify the composition of different canola meals and improve their nutritional value by significantly increasing the protein content, decreasing the levels of antinutrients, while only slightly reducing IVPD.