A PSS‐Free PEDOT Conductive Film Supported by a Hierarchical Nanoporous Layer Glass

The importance of transparent conductive film is increasing due to its use in applications such as touch‐panel devices. Although indium tin oxide is widely used because of its high conductivity and transparency, conductive polymers are being studied as alternative materials that avoid the use of rare metals and the brittleness associated with existing systems. Polyethylene dioxythiophene (PEDOT)/polyethylene sulfonic acid (PSS) is drawing a lot of attention due to its well‐balanced conductivity, transparency, film formability, and chemical stability. The nonconductive PSS reportedly covers the conductive PEDOT. The PSS shell provides carrier and film‐formability to PEDOT but is also a barrier that hinders electrical conductivity. Therefore, the PEDOT film formability is explored supported by a substrate without the addition of PSS. The “hierarchical nanoporous layer glass” holds the PSS‐free PEDOT with its nanopores to form a homogeneous, transparent film. The PSS‐free PEDOT film thus achieves transparency of over 85% and resistivity of below 500 Ω sq^?1.     

Solvent free mechanochemical synthesis of MnO2 for the efficient degradation of Rhodamine-B

MnO₂ nanorods were synthesized by mechanochemical processing with subsequent heat treatment and their photocatalytic activity was studied on the decolourization of aqueous solution of Rhodamine B at different pH levels. A solid state redox reaction 2KMnO₄ + MnCl₂ → 3MnO₂ + 2KCl + O₂ was activated during mechanical milling. Excess KCl salt was added in the starting powder mixture to prevent agglomeration of MnO₂ nanoparticles. The milling resulted in the production of amorphous MnO₂ nanoparticles with a high surface area of 204 m² g^?1. Crystalline MnO₂ nanorods of diameters about 15–20 nm were produced by heating the as-milled powder at 350 °C for 1 h in air. Amorphous MnO₂ nanoparticles showed higher degradation rate of Rhodamine B than crystalline MnO₂ nanorods under simulated sunlight. The degradation rate was higher under acidic conditions. This work demonstrates the potential for cost effective, green and scalable synthesis of MnO₂ nano-catalysts for environmental applications.     

Analysis of Plasmalogen Species in Foodstuffs

Ethanolamine plasmalogen (PlsEtn), which is present at high levels in brains, is believed to be involved in neuronal protection. The present study was performed to search for PlsEtn resources in foodstuffs. The foodstuffs examined showed a wide range of PlsEtn contents from 5 to 549 μmol/100 g wet wt. The marine invertebrates, blue mussel, and ascidian had high PlsEtn contents (over 200 μmol/100 g wet wt). Profiling of the molecular species showed that the predominant fatty acids of PlsEtn species were 20:5 (EPA) and 22:6 (DHA) at the sn‐2 position of the glycerol moiety in marine foodstuffs, whereas major PlsEtn species in land foodstuffs were 20:4. Following quantitative analysis by multiple reaction monitoring, the ascidian viscera were shown to contain the highest levels of 18:0/20:5‐PlsEtn and 18:0/22:6‐PlsEtn (86 and 68 μmol/100 g wet wt, respectively). In order to evaluate a neuronal antiapoptotic effect of these PlsEtn species, human neuroblastoma SH‐SY5Y cells were treated with ethanolamine glycerophospholipid (EtnGpl), purified from the ascidian viscera, under serum starvation conditions. Extrinsic EtnGpl from ascidian viscera showed stronger suppression of cell death induced by serum starvation than with bovine brain EtnGpl. The EtnGpl from ascidian viscera strongly suppressed the activation of caspase 3. These results suggest that PlsEtn, especially that containing EPA and DHA, from marine foodstuffs is potentially useful for a therapeutic dietary supplement preventing neurodegenerative diseases, such as Alzheimer's disease (AD).     

Research on some basic deformations in free forging with robot and servo-press

Due to the disadvantages in casting or hot forging of Ti alloy artificial bones, such as low strength and high energy cost, this paper prompted an alternative method to manufacture individuated artificial bones. Free forging with a 6-axis freedom robot and servo-press could be very economical in the forming of complex shape parts because of its high flexibility and simple die-setting. Based on this system, the authors studied deformations of some basic elements, which could be assembled to artificial bones with complex shape. Firstly, the compression limit and effect of compression parameters on the roundness during reducing diameter process were declared for Al alloy and pure Ti. Secondly, an approximate theoretical equation of bending angle or curvature radius was proposed, and it matches experimental results well. Finally, a dimension prediction equation was presented by considering effect of material anisotropy, and then the ladder part without width spread was manufactured accordingly.     

Single molecule fluorescence autocorrelation measurement on anisotropic molecular diffusion in nematic liquid crystal

Diffusion kinetics of three dyes in nematic liquid crystals are studied with single-molecule fluorescence autocorrelation spectroscopy. Markedly large anisotropy was observed in the diffusion coefficient and structure of diffusion molecules showed no marked effect on the anisotropy.     

Zone-melted unidirectional solidification of particulate dispersed composites

In order to solve the problem of particles settling and agglomeration in front of solidifying interface in unidirectional solidification (UDS) experiments, a zone-melted process has been utilized in this study. The experimental results show that, the melting zone could be kept in 30–40 mm width and the zone melted UDS experiments are realized with Al₂O₃ particle reinforced aluminum-matrix composites. But particle settling still occurs in the liquid, and becomes severe as the particle volume fraction decreases. However, when the volume fraction of the particles is more than 20–22 vol.%, no further settling occurs under a solidification rate of 8–16 mm/h. Investigation on the interaction of particles and solid/liquid interface reveals that the Al₂O₃ particles are rejected into liquid and pushed by the growing solid phase in Al₂O_3(P)/Al and Al₂O_3(P)/Al-0.23wt.%Ce composites. Some particles are mechanically entrapped between cells, and distributed along the crystal grain boundaries.     

Group Symmetry in Interior-Point Methods for Semidefinite Program

A class of group symmetric Semi-Definite Program (SDP) is introduced by using the framework of group representation theory. It is proved that the central path and several search directions of primal-dual interior-point methods are group symmetric. Preservation of group symmetry along the search direction theoretically guarantees that the numerically obtained optimal solution is group symmetric. As an illustrative example, we show that the optimization problem of a symmetric truss under frequency constraints can be formulated as a group symmetric SDP. Numerical experiments using an interior-point algorithm demonstrate convergence to strictly group symmetric solutions.