Electrical conductivity of tetragonal stabilized zirconia

The electrical conductivity change on annealing for tetragonal stabilized zirconia (TZP) was studied with the help of a.c. impedance dispersion analysis techniques. The dependences of the conductivity on annealing time at 1000 ° C and on temperature cycling between room temperature and 1000 ° C were investigated. A decrease in conductivity of about 30% at 1000 ° C of TZP with 3 mol% Y₂O₃ was observed during the first 200 h of annealing at 1000 ° C, and no change was observed during further annealing. A similar result was observed for TZP with 2.9 mol% Sc₂O₃. For TZP with 3.0mol% Yb₂O₃, the conductivity decreased gradually during an annealing time of over 2000 h. The impedance dispersion analysis at lower temperature suggested that the decrease in electrical conductivity by annealing at 1000 ° C could be attributed to the increases of both grain boundary and intragrain resistance. No monoclinic phase was observed for the samples annealed at 1000 ° C for 2000 h. On the other hand, a trace of a monoclinic phase was found for TZP with 3mol% Y₂O₃ after the 50th temperature cycling, but no significant decrease in conductivity was observed with the cycling.     

Structural Defects Control the Energy Level Alignment at Organic/Organic Interfaces

The dependence of the energy level alignment (ELA) on structural defects at an organic/organic heterojunction (OOH) of perfluoropentacene (PFP)‐on‐diindenoperylene (DIP) was investigated using X‐ray scattering and ultraviolet photoelectron spectroscopy. The density of structural defects near the interface between the PFP and DIP layers was varied by changing the growth temperature of the DIP film. A direct relationship was found between the defect density and the ELA at the OOH; the ELA together with the change in the electrostatic potential (quasi‐interface dipole layer) at the OOH varies systematically with the defect density near the interface. This indicates that a key factor affecting the ELA is the electrostatic potential change across the OOH interface, which is produced by electron transfer from DIP occupied gap states to PFP unoccupied gap states. These gap states originate from the defects and are effectively controlled by adjusting the growth conditions of the organic films. As a result, the ELA at OOH interfaces can be controlled by the density of structural defect, which is important for organic devices employing OOHs, such as organic photovoltaic cells.     

Characterization of electrode/electrolyte interface for lithium batteries using in situ synchrotron X-ray reflectometry—A new experimental technique for LiCoO2 model electrode

A new experimental technique was developed for detecting structure changes at electrode/electrolyte interface of lithium cell using X-ray reflectometry and two-dimensional model electrodes with a restricted lattice-plane. The electrodes were constructed with an epitaxial film of LiCoO₂ synthesized by pulsed laser deposition method. The orientation of the epitaxial film depends on the substrate plane; the 2D layer of LiCoO₂ is parallel to the SrTiO₃ (1 1 1) substrate (_(0 0 3)LiCoO₂//_(1 1 1)SrTiO₃)$({(003)}_{\text{LiCo}{\text{O}}_2}//{(111)}_{\text{SrTi}{\text{O}}_3})$, while the 2D layer is perpendicular to the SrTiO₃ (1 1 0) substrate (_(1 1 0)LiCoO₂//_(1 1 0)SrTiO₃)$({(110)}_{\text{LiCo}{\text{O}}_2}//{(110)}_{\text{SrTi}{\text{O}}_3})$. The anisotropic properties were confirmed by electrochemical measurements. Ex situ X-ray reflectivity measurements indicated that the impurity layer existed on the as-grown LiCoO₂ was dissolved and a new SEI layer with lower density was formed after soaking into the electrolyte. In situ X-ray reflectivity measurements indicated that the surface roughness of the intercalation (1 1 0) plane increased with applying voltages, while no significant changes in surface morphology were observed for the intercalation non-active (0 0 3) plane during the pristine stage of the charge–discharge process.     

950 keV, 3.95 MeV and 6 MeV X-band linacs for nondestructive evaluation and medicine

We are developing compact X-band linac X-ray sources for nondestructive evaluation and medicine. First, we develop a portable X-ray system by a 950 keV 9.4 GHz X-band linac to realize on-site inspection. We use a low power (250 kW) magnetron as an RF source for compactness of the whole system. Since the RF power source is quite small and the stored energy in the structure is also small, we faced the problem of beam loading and current/RF-power oscillation. We are analyzing the problem by the circuit model. We plan to use this system for erosion inspection of metal pipes of petrochemical complex. By adopting a side-coupling cavity design to avoid the oscillation, we have developed 6 MeV X-band (9.3 GHz) linac for pinpoint dynamic tracking cancer therapy. Furthermore, we are manufacturing 3.95 MeV X-band (9.3 GHz) linac X-ray source with flexible waveguides for on-site bridge inspection. Updated results and situations are presented.     

Modulation of nanotube formation in apatite single crystal via organic molecule incorporation

Hydroxyapatite materials are potentially useful for biomedical application, especially as vehicles for functional molecules. Structural control of bulk apatite materials, such as in the fabrication of hollow microspheres or porous structures, has been studied for this purpose. However, control of the internal structure of the source apatite crystal itself is still a challenge. Here, we show that small organic molecules incorporated in apatite crystals act as porogens which control the porous structure of apatite single crystal. The presence of amino acid under apatite synthesis conditions leads to firm bindings and encapsulation of the amino acid in apatite single crystals. Amino acid elimination by heating or electron beam irradiation enhances the pore formation in apatite single crystal. Moreover, incorporation of an acidic amino acid in apatite induces peapod like nanotubes in apatite single crystals. This study suggests the potential of using small organics for nano-structural control of apatite single crystals which would be valuable for enhancing drug loadings or modulating material digestion in vivo.     

Analysis of nonlinear transient responses of piezoelectric resonators

The electric transient response method is an effective technique to evaluate material constants of piezoelectric ceramics under high-power driving. In this study, we tried to incorporate nonlinear piezoelectric behaviors in the analysis of transient responses. As a base for handling the nonlinear piezoelectric responses, we proposed an assumption that the electric displacement is proportional to the strain without phase lag, which could be described by a real and constant piezoelectric e-coefficient. Piezoelectric constitutive equations including nonlinear responses were proposed to calculate transient responses of a piezoelectric resonator. The envelopes and waveforms of current and vibration velocity in transient responses observed in some piezoelectric ceramics could be fitted with the calculation including nonlinear responses. The procedure for calculation of mechanical quality factor Q(m) for piezoelectric resonators with nonlinear behaviors was also proposed.     

Clinical studies on vancomycin in the treatment of MRSA infection

We evaluated the effectiveness and safety of vancomycin (VCM) alone and in combination with beta-lactam antibiotics in the treatment of MRSA infections, and obtained the following results: 1. Effectiveness. (1) In cases of MRSA infections alone, the improvement rate was 71.4% (5/7 patients) with VCM alone and 77.8% (35/45) with VCM in combination with beta-lactam antibiotics. (2) In cases of polymicrobial infections, few cases were treated with VCM alone, but the improvement rate in combination use with beta-lactam antibiotics was 71.8% (28/39). 2. Bacteriological effect. (1) In cases of single infection with MRSA, the rate of bacterial eradication was 71.4% (5/7) with VCM alone and 68.2% (30/44) with VCM in combination with beta-lactam antibiotics. (2) In cases of polymicrobial infections, few cases were treated with VCM alone, but the rate of bacterial eradication in combination use with be ta-lactam antibiotics was 63.2% (24/38) against MRSA and 31.6% (12/38) against polymicrobial agents including MRSA. 3. Safety. Occurrences of adverse reactions and abnormal laboratory test values when VCM was used alone or when it is used in combination with another drug were about the same in these uses. As a whole, advance reactions were observed in 16 patients (9.5%). Main adverse reactions were whole body redness, drug eruption, and rash etc. Abnormal laboratory test values were observed mainly in hepatic functions, and renal functions. 4. VCM concentrations in blood was determined in 38 patients. Doses of 0.5 g and 1.0 g of VCM was administered by intravenous drip infusion over a period of 1 to 2 hours, and mean blood concentrations 1 to 2 hours after the completion of drip infusion were 25.4 micrograms/ml and 14.4 micrograms/ml, respectively. 5. Synergic effects between VCM and other antibiotics tested were observed in FIC index against all of the six MRSA strains isolated from six patients, and the clinical effects of improvement or better were obtained against five of them.     

Mammalian Polycomb group genes are categorized as a new type of early response gene induced by B-cell receptor cross-linking

Polycomb group (PcG) genes were initially described in Drosophila melanogaster as regulators of the homeobox gene. Four mammalian homologues, mel-18, bmi-1, M33 and rae-28, are analyzed in this study. They not only regulate mammalian homeotic genes by analogy with their Drosophila counterparts, but also have some influence on the growth and differentiation of B lymphocytes. Here we report that these four mammalian PcG genes are rapidly induced after antigen-receptor cross-linking in B cells. Thus we would like to propose that mammalian PcG genes can be categorized as a new type of immediate early gene.     

Seven zinc-finger transcription factors are expressed sequentially during the development of anthers in petunia

BACKGROUND: Little is known about the value of heart rate variability in patients with symptomatic coronary artery disease with a preserved left ventricular function. We hypothesized that in these patients heart rate variability might be a helpful adjunct to conventional parameters to predict clinical events. METHODS: In a prospective 2-year follow-up study ambulatory electrocardiographic recordings were performed in 263 consecutive male patients (mean age 56+/-8 years) with stable angina pectoris and a mean left ventricular ejection fraction of 71%+/-12%. Clinical events consisted mainly of coronary events such as percutaneous transluminal angioplasty or coronary artery bypass graft operation. RESULTS: Low measures of standard deviation of normal R-R intervals, standard deviation of the mean R-R intervals of 5 minutes, and two spectral components of heart rate variability were found in patients who had had an event compared with patients with no event. Adjusted for severity of angina, the presence of a previous myocardial infarction, and the use of beta-blockers in a logistic regression model this relation remained statistically significant for SDNN. Healthy volunteers appeared to have the highest measures of heart rate variability. CONCLUSION: In patients with ischemic heart disease and normal or near normal ventricular function decreased heart rate variability is associated with adverse clinical events.     

Effects of topical nipradilol, a beta-blocking agent with alpha-blocking and nitroglycerin-like activities, on aqueous humor dynamics and fundus circulation

PURPOSE: To study the effects of nipradilol, a nonselective beta-blocker with alpha 1-blocking activity and nitroglycerin-like activity, on aqueous humor dynamics and optic nerve head (ONH) circulation in albino rabbits. METHODS: Experiments were carried out during the dark phase, in conscious rabbits conditioned to a schedule of alternating 12-hour periods of light and dark. The blood-aqueous barrier permeability and the aqueous flow rate were determined fluorophotometrically. The effect on outflow to general blood circulation and uveoscleral outflow were determined by using the fluorophotometric Diamox technique, and the effect on the uveoscleral outflow was further assessed by using the anterior chamber perfusion method. The ONH circulation was estimated by using the laser speckle method. RESULTS: Unilateral topical administration of 0.25% nipradilol solution lowered intraocular pressure (IOP) with relatively weak contralateral effects in a dose-dependent manner with a maximum reduction of 6 mm Hg and an effect duration of 6 hours. Twice-daily instillation for 14 days showed no attenuation of the effects. Single instillation of 0.25% nipradilol showed no significant effect on blood-aqueous barrier permeability and decreased aqueous flow rate in the treated eye (17%; P < 0.01) and in the contralateral eye (9%, P < 0.05). Nipradilol produced no significant effect on outflow facility to general blood circulation, whereas it substantially increased uveoscleral outflow. Twice-daily 0.25% nipradilol instillation increased ONH tissue blood velocity by 13% (P < 0.01), which was probably attributable to locally penetrating drug. CONCLUSIONS: Because of its ability to lower IOP and to increase uveoscleral outflow and optic nerve head circulation in rabbits, further studies are warranted to determine whether nipradilol has potential as an antiglaucoma agent in humans.