Hydrothermal Corrosion of Alumina Ceramics

The corrosion behavior and strength degradation of alumina ceramics with 99%, 99.9%, and 99.99% Al₂O₃ were studied in water at 300°C and 8.6 MPa for 1 to 10 d. The weight loss in alumina ceramics was mainly attributed to the dissolution of SiO₂ and Na₂O grain-boundary impurities. Intergranular corrosion proceeded in the alumina ceramics by preferential attack at the grain boundaries. The extent of the strength reduction for corroded alumina ceramics was related to the impurity level in the alumina ceramics.     

Preparation of SrBi 2 Ta 2 O 9 Thin Films by Liquid-Delivery MOCVD Without Additional Solvents

SrBi 2 Ta 2 O 9 thin films were prepared by ECR plasma enhanced metalorganic chemical vapor deposition (ECR-MOCVD) with a liquid-delivery system using one cocktail source without an additional solvent. The strontium-tantalum double alkoxide, Sr{Ta[OC 2 H 4 H(CH 3 ) 2 ](OC 2 H 5 ) 5 } 2 , was dissolved in stabilized trimethyl bismuth, Bi(CH 3 ) 3 / dioxane. This source system has been used in a conventional bubbling system. Deposition rate and the composition of the films were strictly controlled by the concentration and the composition of the cocktail source. Therefore, high reproducibility was realized by using this system. The constituent phase of the stoichiometric SBT film as-deposited at 500 C on a (111)Pt/TiO 2 /SiO 2 /Si substrate was a fluorite phase and transformed to the single phase of SBT by the post annealing at 800 C. It showed almost the same ferroelectricity as the stoichiometric composition film.     

Mixed powder coating film using thermoplastic polyester and its alkaline resistance

To improve alkaline resistance, a newly mixed powder coating film using thermoplastic polyethylene terephthalate (PET) was investigated. Two kinds of polyvinyl butyral (PVB) and two kinds of polyamide (PA) were chosen as the secondary polymer. The melting temperatures (T _ms) of these materials were lower than that of primary PET polymer so the mixed powder coating was able to form a dual phase film through a fluidized bed coating process. Microscope and Fourier transform infrared spectroscopy (FTIR) observations revealed that the dual phase structure was indeed successfully formed and there was a secondary layer over the entire surface area of the film. This mixed powder coating film significantly enhanced the alkaline resistance to an environment filled with NaOH solution at 40°C in which a secondary material would be effective in protecting the film. With regard to both alkaline resistance and film formability, PET/PVB was superior to the PET/PA mixture.     

Research on some basic deformations in free forging with robot and servo-press

Due to the disadvantages in casting or hot forging of Ti alloy artificial bones, such as low strength and high energy cost, this paper prompted an alternative method to manufacture individuated artificial bones. Free forging with a 6-axis freedom robot and servo-press could be very economical in the forming of complex shape parts because of its high flexibility and simple die-setting. Based on this system, the authors studied deformations of some basic elements, which could be assembled to artificial bones with complex shape. Firstly, the compression limit and effect of compression parameters on the roundness during reducing diameter process were declared for Al alloy and pure Ti. Secondly, an approximate theoretical equation of bending angle or curvature radius was proposed, and it matches experimental results well. Finally, a dimension prediction equation was presented by considering effect of material anisotropy, and then the ladder part without width spread was manufactured accordingly.     

Microelectrode-based hydrogen peroxide detection during oxygen reduction at Pt disk electrode

We investigated the diffusion process of H₂O₂ generated during O₂ reduction at a Pt microdisk electrode used as a generator for scanning electrochemical microscopy (SECM). First, the amount of O₂ consumption and generated H₂O₂ at the Pt generator electrode are estimated using a detector electrode installed in the SECM. Based on the results, a large amount of O₂ consumption and generated H₂O₂ are detected at the center of each generator electrode. According to the measurement, the O₂ starvation and H₂O₂ detection currents can be defined. Subsequently, the O₂ starvation and H₂O₂ detection currents are measured by varying the generator size. As a result, these currents decrease with a decrease in the generator electrode size, however, the H₂O₂ diffusion process is changed for the generator diameter of less than 50 μm. Finally, the O₂ starvation and H₂O₂ detection measurements were conducted using a Nafion-coated Pt microdisk electrode. The amount of O₂ consumption is not suppressed, while the amount of generated H₂O₂ decreases with the Nafion layer prepared on the Pt electrode. This result indicates that the thickness of the H₂O₂ diffusion layer in the H₂SO₄ solution is dramatically diminished by coating the Nafion layer on the Pt generator.     

Improvement of light fastness of natural dyes. Part 2: Effect of functional phenyl esters on the photofading of carthamin in polymeric substrate†

The photofading behaviour of carthamin in cellulose acetate film was investigated. A contribution from singlet oxygen to that fading was suggested. Phenyl esters containing nickel sulphonate quenching groups were prepared and the protecting effect of these compounds towards the photofading of carthamin was examined in cellulose acetate film. It is proposed that nickel sulphonate derivatives of phenyl esters can be applied as effective stabilisers against the fading of natural dyes.     

Single molecule fluorescence autocorrelation measurement on anisotropic molecular diffusion in nematic liquid crystal

Diffusion kinetics of three dyes in nematic liquid crystals are studied with single-molecule fluorescence autocorrelation spectroscopy. Markedly large anisotropy was observed in the diffusion coefficient and structure of diffusion molecules showed no marked effect on the anisotropy.     

Electrical Properties of 1.7-MeV-Electron-Irradiated Sulfur-Doped GaP

The electrical properties of 1.7-MeV-electron-irradiated sulfur (S)-doped GaP were studied by using Hall effect and resistivity measurements. It was found that the concentration of S donors decreased and the deep acceptors were introduced by 1.7-MeV electron irradiation. The decrease of the concentration of S donors could be understood by considering the formation of a complex center of radiation-produced defects with S. A complex center acted as a deep acceptor and recovered in the stage centered at 150°C anneal. The introduction rate of this center was ~2.1 cm-1. From the isothermal annealing experiments, it was found that the recovery for this center approximately obeyed first-order kinetics and its activation energy was ~1.7 eV. Furthermore, another complex center involving S, which was a non-compensating defect in n-type GaP, was introduced. This center was seemed to be a deep donor.     

Impact of Key Circuit Parameters on Signal-to-Noise Ratio Characteristics for the Radio Frequency Single-Electron Transistors

Hybrid simulation was performed to analyze the response of the real-time reflection-type radio frequency single-electron transistor (RF-SET) measurement system. A compact and physically-based analytical SET model, which was validated with a Monte Carlo simulator, was used to simulate the SET characteristics, while SPICE equivalent circuits were implemented to simulate all other components of the RF-SET measurement system. The impact of various key parameters on the RF-SET response was demonstrated for a carrier frequency much less than I/e ( is the typical current through the SET). It was revealed that an inevitable feed-through loss between the tank circuit and the cryogenic amplifier, and high-frequency parasitics of the inductor degrade the RF-SET performance significantly. As such, they have to be optimized to experimentally realize the shot-noise-limited charge sensitivity.