Adsorption of aromatic amines and o-substituted derivatives of phenol from organic solutions by activated carbons-effect of surface acidity

In order to study the effect of surface acidity of activated carbons on their adsorption characteristics, three kinds of aromatic amines and four kinds of o-substituted phenols were adsorbed from organic solutions by twelve kinds of activated carbons of different acidity and of known pore-structure. It was demonstrated that the surface acidity had a marked effect on the adsorption characteristics and that the effect was linked with the polarity of the solvents.     

Ingestion of plasmalogen markedly increased plasmalogen levels of blood plasma in rats

Plasmalogens, a subclass of phospholipids, are widely distributed in human and animals, and are taken into the body as food. However, no data exist on the intestinal absorption or fate of ingested plasmalogen. Here, we determined whether dietary plasmalogen is absorbed and whether blood and tissue concentrations increased in normal male Wistar rats by using four separate experiments. Phospholipids containing more than 20 wt% of plasmalogen extracted from the bovine brain were incorporated into test diets (10–15 wt%). In experiment 1, we estimated the absorption rate by measuring the plasmalogen vinyl ether bonds remaining in the alimentary tract of rats after the ingestion of 2 g of test diet containing 91 μmol plasmalogen. The absorption rate of plasmalogen was nearly 80 mol% after 4 h, comparable to the total phospholipid content in the test diet. In experiment 2, we observed no degradation of the plasmalogen vinyl ether bonds under in vitro conditions simulating those of the stomach and small intestinal lumen. In experiment 3 we confirmed a comparable absorption (36 mol%) by using a closed loop of the upper small intestine in anesthetized rats 90 min after injecting a 10 wt% brain phospholipid emulsion. Feeding a test diet containing 10 wt% brain phospholipids for 7 d increased plasmalogen concentration threefold in blood plasma and by 25% in the liver; however, no increases were seen in blood cells, skeletal muscle, brain, lungs, kidneys, or adipose tissue (experiment 4). We concluded that dietary plasmalogen is absorbed from the intestine and contributes to a large increase in plasmalogen levels in blood plasma.     

Fourier synthesis image reconstruction by use of one-dimensional position-sensitive detectors

An improvement of Fourier synthesis optics for hard x-ray imaging is described, and the basic performance of the new optics is confirmed through numerical simulations. The original concept of the Fourier synthesis imager utilizes nonposition-sensitive hard x-ray detectors coupled to individual bigrid modulation collimators. The improved concept employs a one-dimensional position-sensitive detector (such as a CdTe strip detector) instead of the second grid layer of each bigrid modulation collimator. This improves the imaging performance in several respects over the original design. One performance improvement is a two-fold increase in the average transmission, from 1/4 to 1/2. The second merit is that both the sine and cosine components can be derived from a single grid-detector module, and hence the number of imaging modules can be halved. Furthermore, it provides information along the depth direction simultaneously. This in turn enables a three-dimensional imaging hard x-ray microscope for medical diagnostics, incorporating radioactive tracers. A conceptual design of such a microscope is presented, designed to provide a field of view of 4 mm and a spatial resolution of 400 microm.     

Defective bone remodelling in osteoprotegerin-deficient mice

Previous studies have reported enhanced osteoclastogenesis, increased bone resorption and osteoporosis in osteoprotegerin (OPG)-deficient mice. In the present study, we show that the tibial epiphyses contain abundant, thin trabeculae lined with numerous osteoclasts and cuboidal osteoblasts. The increase in osteoblasts and osteoclasts was associated with a dramatic increase in calcein labelling of the mineralization fronts and replacement of much of the intertrabecular marrow with numerous alkaline phosphatase-positive preosteoblasts. Furthermore, the discrete, linear cement lines seen in wild-type mice were replaced by a randomly oriented meshwork of cement lines that were stained intensely for tartrate-resistant acid phosphatase and osteopontin in the OPG-/- mice. These indices of accelerated bone remodelling in mutant bone were associated with irregular trabecular surfaces, a disorganized collagen matrix interspersed with amorphous ground substance and numerous fissures between old and new bone. In total, these observations indicate that enhanced osteoclastic activity in OPG-/- epiphyses led to a coupled increase in osteoblast differentiation and activity and an increase in bone remodelling. The high bone turnover, disorganized matrix and impaired attachment of new to old bone in the cement lines in OPG-/- mice appear to cause bone fragility.     

中国液态锂铅包层材料研究进展

液态锂铅包层是国际上普遍关注和最有发展潜力的聚变堆包层概念设计之一,而包层材料是液态锂铅包层的核心问题之一.目前,液态锂铅包层普遍选用低活化铁素体/马氏体钢(RAFM钢)作为结构材料,液态锂铅作为中子倍增剂及氚增殖剂.另外,部分设计采用了耐高温、电绝缘流道插件作为功能材料,以降低磁流体动力学效应及提高冷却剂出口温度(高于700℃).为适应液态包层的发展需求,中国科学院等离子体物理研究所FDS团队联合国内外相关研究单位,进行了具有中国自主知识产权的中国低活化马氏体钢(CLAM钢)及液态锂铅包层功能材料研发,并开展了锂铅热对流及强迫对流回路的设计、研制及腐蚀实验研究,以研究液态金属锂铅的流动特性及其与结构和功能材料的相容性.同时建立了聚变堆材料数据库平台,为促进中国聚变堆液态包层及材料技术的研究和发展提供数据支持.     

Preparation of porous sheet composite impregnated with TiO<Subscript>2</Subscript> photocatalyst by a papermaking technique

Titanium dioxide (TiO₂) powder-containing sheet composites, called TiO₂ sheet, were prepared by a papermaking technique, and their photocatalytic efficiency was investigated. The TiO₂ powders were homogeneously scattered over the fiber-mix networks tailored within the catalyst sheet. Under UV irradiation, the TiO₂ paper could decompose p-hydroxyacetophenone (p-HAP), although the degradation efficiency by the TiO₂ sheet was lower than that by the TiO₂ powder. Scanning electron microscopy revealed that coverage of the TiO₂ particles inside the sheet by alumina binder which was used to improve the sheet strength caused the deterioration of the photocatalytic performance. Internal addition of alumina binder made the TiO₂ sheet porous and such a TiO₂ sheet exhibited high photocatalytic performance equivalent to that of TiO₂ powder. The porous structure of TiO₂ sheet might contribute to effective transport of p-HAP to the surface of TiO₂ particles inside the sheet, resulting in high degradation performance. In addition, TiO₂ sheet prepared using TiO₂ sol showed higher photocatalytic efficiency than TiO₂ powder and it was indicated that the porous sheet structure might provide suitable conditions for TiO₂ catalysis for photodecomposition.     

Benchmarks for psychotherapy efficacy in adult major depression.

This study estimates pretreatment-posttreatment effect size benchmarks for the treatment of major depression in adults that may be useful in evaluating psychotherapy effectiveness in clinical practice. Treatment efficacy benchmarks for major depression were derived for 3 different types of outcome measures: the Hamilton Rating Scale for Depression (M. A. Hamilton, 1960, 1967), the Beck Depression Inventory (A. T. Beck, 1978; A. T. Beck & R. A. Steer, 1987), and an aggregation of low reactivity-low specificity measures. These benchmarks were further refined for 3 conditions: treatment completers, intent-to-treat samples, and natural history (wait-list) conditions. The study confirmed significant effects of outcome measure reactivity and specificity on the pretreatment-posttreatment effect sizes. The authors provide practical guidance in using these benchmarks to assess treatment effectiveness in clinical settings. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Trunk motion control during the flight phase while hopping considering angular momentum of a humanoid

In previous studies, various stabilizing control methods for humanoids during the stance phase while hopping and running were proposed. Although these methods contribute to stability while hopping and running, it is possibility that the control during the flight phase could also affect the stability. In this study, we investigated whether the control during the flight phase can affect the stability of a humanoid while running. To achieve stable hopping, we developed a control system that accounts for the angular momentum of the whole body during the flight phase. In this system, the angular momentum generated by the motion of the lower body in each time interval is calculated during the flight phase, and the trunk joints are controlled to generate the angular momentum necessary to compensate for the deviation of the waist posture, which is used as the reference point for the motion coordinate system of the robot. Once the proposed control system was developed and simulated, we found that the hopping duration in the unconstrained state was extended.     

High-performance self-aligned SiGeC HBT with selectively grown Si/sub 1-x-y/Ge/sub x/C/sub y/ base by UHV/CVD

Si/sub 1-x-y/Ge/sub x/C/sub y/ selective epitaxial growth (SEG) was performed by cold-wall, ultrahigh-vacuum chemical vapor deposition, and the effects of incorporating C on the crystallinity of Si/sub 1-x-y/Ge/sub x/C/sub y/ layers and the performance of a self-aligned SiGeC heterojunction bipolar transistor (HBT) were evaluated. A Si/sub 1-x-y/Ge/sub x/C/sub y/ layer with good crystallinity was obtained by optimizing the growth conditions. Device performance was significantly improved by incorporating C, as a result of applying Si/sub 1-x-y/Ge/sub x/C/sub y/ SEG to form the base of a self-aligned HBT. Fluctuations in device performance were suppressed by alleviating the lattice strain. Furthermore, since the B out diffusion could be suppressed by incorporating C, the cutoff frequency was able to be increased with almost the same base resistance. A maximum oscillation frequency of 174 GHz and an emitter coupled logic gate-delay time of 5.65 ps were obtained at a C content of 0.4%, which shows promise for future ultrahigh-speed communication systems.