Ultra-High bit rate all-optical AND/OR logic gates based on photonic crystal with multi-wavelength simultaneous operation

In this paper, a novel two-dimensional photonic crystal based all-optical AND/OR logic gates are designed, simulated and optimized. The structure is built on a linear square lattice photonic crystal platform. A multi-wavelength operation, together with a simultaneous operation, is achieved at ultra-high bit rates. The concurrent operation is attained without altering the proposed design continuously, as stated in the literature. It provides simplicity because there is no auxiliary input required along with the absence of externally attached phase shift units. The enhancement process has been done to the rod radius. A magnificent representation tool is developed. The benefit of the mentioned tool lies in the data combination of different operating wavelengths, contrast ratio, and bit rate; which will establish an efficient optimization process. Each gate is enhanced independently, then an overall improvement has been done. As a result, the operation at 1.52?µm will provide a successful multi logic gate operation with ultra-high bit rates of 6.76 and 4.74 Tbit/s for AND and OR logic gates, respectively. The design has an acceptable size of (19.8?×?12.6 µm) and a contrast ratio of 9.74?dB and 17.95?dB for the designed AND and OR gate, respectively. The design is highly sensitive to the waveguide length to verify the gates on demand.     

Evaluation of the Optical and Structural Properties of Constructed Bis-indole Derivatives Using (Sm2O3/SiO2) Catalyst

Silicon - (SiO2/Sm2O3) was successfully synthesized and examined using scanning electron microscopy; X-ray diffraction and Fourier transform infrared spectroscopy. Obtained data shows the formation...     

Congestion control as a stochastic control problem with action delays

We consider the design of explicit rate-based congestion control for high-speed communication networks and show that this can be formulated as a stochastic control problem where the controls of different users enter the system dynamics with different delays. We discuss the existence, derivation and the structure of the optimal controller, as well as of suboptimal controllers of the certainty-equivalent type — a terminology that is precisely defined in the paper for the specific context of the congestion control problem considered. We consider, in particular, two certainty-equivalent controllers which are easy to implement, and show that they are stabilizing, i.e., they lead to bounded infinite-horizon average cost, and stable queue dynamics. Further, these controllers perform well in simulations.     

Effect of fiber orientation on viscoelastic properties of polymer matrix composites subjected to thermal cycles

Fibers in polymer composites can be designed in various orientations for their usage in service life. Various fiber orientated polymer composites, which are used in aeroplane and aerospace applications, are frequently subjected to thermal cycles because of the changes in body temperatures at a range of −60 to 150°C during flights. It is an important subject to investigate the visco‐elastic properties of the thermal cycled polymer composite materials which have various fiber orientations during service life. Continuous fiber reinforced composites with a various fiber orientations are subjected to 1,000 thermal cycles between the temperatures of 0 and 100°C. Dynamic mechanic thermal analysis (DMTA) experiments are carried out by TA Q800 type equipment. The changes in glass transition temperature (T_g), storage modulus (E′), loss modulus (E′′) and loss factor (tan δ) are inspected as a function of thermal cycles for different fiber orientations. It was observed that thermal and dynamic mechanical properties of the polymer composites were remarkably changed by thermal cycles. It was also determined that the composites with [45°/−45°]_s fiber orientation presented the lowest dynamic mechanical properties. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Dynamic Knowledge-Based Process Integration Portal for Collaborative Construction

There is a need to support collaborative coordinated construction through the integration of work processes across various stakeholders, disciplines, and projects. Due to the fast-growing complexities of domain-wide coordination and collaboration, coupled with the emerging opportunities of knowledge sharing, a knowledge-based approach is believed to be the way to go. Knowledge-based process integration takes into account explicit and formal semantics (meaning) of processes. It aims at supporting seamless integration of knowledge-carrying processes. This paper presents a prototype collaborative portal for domain-wide process integration. The portal is ontology-based: semantic process representation is enabled through ontologies, and knowledge-based process integration is facilitated through an ontology merger. The portal aims at offering an efficient value-adding collaboration platform through multidimensional process integration for producing a common workflow that goes beyond listing of processes to a knowledge-enabled view. The prototype was evaluated through a focus group.     

All-optical digital 4 × 2 encoder based on 2D photonic crystal ring resonators

The photonic crystals draw significant attention to build all-optical logic devices and are considered one of the solutions for the opto-electronic bottleneck via speed and size. The paper presents a novel optical 4 × 2 encoder based on 2D square lattice photonic crystals of silicon rods. The main realization of optical encoder is based on the photonic crystal ring resonator NOR gates. The proposed structure has four logic input ports, two output ports, and two bias input port. The photonic crystal structure has a square lattice of silicon rods with a refractive index of 3.39 in air. The structure has lattice constant ‘a’ equal to 630 nm and bandgap range from 0.32 to 044. The total size of the proposed 4 × 2 encoder is equal to 35 μm × 35 μm. The simulation results using the dimensional finite difference time domain and Plane Wave Expansion methods confirm the operation and the feasibility of the proposed optical encoder for ultrafast optical digital circuits.     

A phenomenological constitutive model for the nonlinear viscoelastic responses of biodegradable polymers

We formulate a constitutive framework for biodegradable polymers that accounts for nonlinear viscous behavior under regimes with large deformation. The generalized Maxwell model is used to represent the degraded viscoelastic response of a polymer. The large-deformation, time-dependent behavior of viscoelastic solids is described using an Ogden-type hyperviscoelastic model. A deformation-induced degradation mechanism is assumed in which a scalar field depicts the local state of the degradation, which is responsible for the changes in the material’s properties. The degradation process introduces another timescale (the intrinsic material clock) and an entropy production mechanism. Examples of the degradation of a polymer under various loading conditions, including creep, relaxation and cyclic loading, are presented. Results from parametric studies to determine the effects of various parameters on the process of degradation are reported. Finally, degradation of an annular cylinder subjected to pressure is also presented to mimic the effects of viscoelastic arterial walls (the outer cylinder) on the degradation response of a biodegradable stent (the inner cylinder). A general contact analysis is performed. As the stiffness of the biodegradable stent decreases, stress reduction in the stented viscoelastic arterial wall is observed. The integration of the proposed constitutive model with finite element software could help a designer to predict the time-dependent response of a biodegradable stent exhibiting finite deformation and under complex mechanical loading conditions.     

A variational constitutive framework for the nonlinear viscoelastic response of a dielectric elastomer

We formulate a variational constitutive framework that accounts for nonlinear viscous behavior of electrically sensitive polymers, specifically Dielectric Elastomers (DEs), under large deformation. DEs are highly viscoelastic and their actuation response is greatly affected in dynamic applications. We used the generalized Maxwell model to represent the viscoelastic response of DE allowing the material to relax with multiple mechanisms. The constitutive updates at each load increment are obtained by minimizing an objective function formulated using the free energy and electrostatic energy of the elastomer, in addition to the viscous dissipation potential of the dashpots in each Maxwell branch. The model is then used to predict the electromechanical instability (EMI) of DE. The electro-elastic response of the DE is verified with available analytical solutions in the literature and then the material parameters are calibrated using experimental data. The model is integrated with finite element software to perform a variety of simulations on different types of electrically driven actuators under various electromechanical loadings. The electromechanical response of the DE and the critical conditions at which EMI occurs were found to be greatly affected by the viscoelasticity. Our model predicts that under a dead load EMI can be avoided if the DE operates at a high voltage rate. Subjected to constant, ramp and cyclic voltage, our model qualitatively predicts responses similar to the ones obtained from the analytical solutions and experimental data available in the literature.     

The tricriteria flowshop scheduling problem

Multicriteria flowshop scheduling problems have been one of the most attractive subjects in recent years. In the multicriteria flowshop scheduling literature, a very limited number of studies have been performed on problems which include a tardiness criterion. In this paper a multicriteria (tricriteria) two-machine flowshop scheduling problem with a tardiness criterion is tackled. The objective is to minimise a weighted sum of total completion time, total tardiness and makespan. An integer programming model is proposed for the problem which belongs to NP-hard class. The modified NEH (Nawaz, Enscore and Ham) algorithm, a tabu search-based heuristic method, random search and the EDD rule (the earliest due date rule) are used to solve problems with up to 2,500 jobs. A computational analysis is conducted to evaluate the performance of the heuristics. The analysis shows that the heuristics are quite efficient, and the performance of the tabu search based heuristic is the best of all in terms of solution quality.     

Effect of Fiber-Reinforced Polymer Wraps on Corrosion Activity and Concrete Cracking in Chloride-Contaminated Concrete Cylinders

This paper presents the results of an experimental study designed to investigate the effect of fiber-reinforced polymer (FRP) wraps on corrosion activity and concrete cracking in chloride-contaminated concrete cylinders. Thirty-five concrete cylinders, each having 102?mm diameter and 204?mm height, concentrically reinforced with one steel reinforcing bar, were subjected to accelerated corrosion exposure for 80?days. Test parameters included level of applied potential, presence of FRP wraps, and bar diameter. The corresponding current and concrete expansion were continuously monitored throughout the corrosion exposure. At the end of the test, the steel bars were extracted, cleaned of rust, and weighed to determine the actual steel mass loss. The results showed that, for the same applied fixed potential, FRP wraps effectively reduced the corresponding current, the concrete expansion, and the steel mass loss. For the same applied potential, the current density increased as the bar diameter decreased. For the same corrosion depth, the circumferential expansion of the cylinder caused by corrosion decreased as the concrete cover-to-bar diameter ratio (c/d) increased.