Adaptive river segmentation in SAR images

There is difficulty for distinguishing of river and shadow in Synthetic Aperture Radar (SAR) images. A method of river segmentation in SAR images based on wavelet energy and gradient is proposed in this paper. It mainly includes two algorithms: coarse segmentation and refined segmentation. Firstly, The river regions are coarsely segmented by the wavelet energy feature,and then refined segmented accurately by the gradient threshold which is got adaptively. The experimental results show the validity of the method, which provides a good foundation for targets detection above the river.     

Oligonucleotide Insecticides for Green Agriculture: Regulatory Role of Contact DNA in Plant–Insect Interactions

Insects vastly outnumber us in terms of species and total biomass, and are among the most efficient and voracious consumers of plants on the planet. As a result, to preserve crops, one of the primary tasks in agriculture has always been the need to control and reduce the number of insect pests. The current use of chemical insecticides leads to the accumulation of xenobiotics in ecosystems and a decreased number of species in those ecosystems, including insects. Sustainable development of human society is impossible without useful insects, so the control of insect pests must be effective and selective at the same time. In this article, we show for the first time a natural way to regulate the number of insect pests based on the use of extracellular double-stranded DNA secreted by the plant Pittosporum tobira. Using a principle similar to one found in nature, we show that the topical application of artificially synthesized short antisense oligonucleotide insecticides (olinscides, DNA insecticides) is an effective and selective way to control the insect Coccus hesperidum. Using contact oligonucleotide insecticide Coccus-11 at a concentration of 100 ng/μL on C. hesperidum larvae resulted in a mortality of 95.59 ± 1.63% within 12 days. Green oligonucleotide insecticides, created by nature and later discovered by humans, demonstrate a new method to control insect pests that is beneficial and safe for macromolecular insect pest management.     

Usnic Acid-Mediated Exchange of Protons for Divalent Metal Cations across Lipid Membranes: Relevance to Mitochondrial Uncoupling

Usnic acid (UA), a unique lichen metabolite, is a protonophoric uncoupler of oxidative phosphorylation, widely known as a weight-loss dietary supplement. In contrast to conventional proton-shuttling mitochondrial uncouplers, UA was found to carry protons across lipid membranes via the induction of an electrogenic proton exchange for calcium or magnesium cations. Here, we evaluated the ability of various divalent metal cations to stimulate a proton transport through both planar and vesicular bilayer lipid membranes by measuring the transmembrane electrical current and fluorescence-detected pH gradient dissipation in pyranine-loaded liposomes, respectively. Thus, we obtained the following selectivity series of calcium, magnesium, zinc, manganese and copper cations: Zn²⁺ > Mn²⁺ > Mg²⁺ > Ca²⁺ >> Cu²⁺. Remarkably, Cu²⁺ appeared to suppress the UA-mediated proton transport in both lipid membrane systems. The data on the divalent metal cation/proton exchange were supported by circular dichroism spectroscopy of UA in the presence of the corresponding cations.     

Design of cavern blasting based on controllable parameters

After a thorough review of some controllable parameters, which included field investigations, cavern dimensions, explosive, rock strength etc., cut, contour, lifters and stoping holes were introduced for blasting cavern of nucleus submarine. These design were conducted using a U. Langefors and B. Kihlstrom theory. Supported by the Navy Cavern Project Foundation of China (02)     

Experimental Investigation and Thermodynamic Description of the Cu-Zr System

The Cu-Zr binary system is re-investigated via experiment and thermodynamic modeling. Four alloys were prepared by arc melting in order to check the controversial phase equilibria reported in the literature. Both as-cast and annealed alloys were examined by optical microscopy, x-ray diffraction and electron probe microanalysis, and the phase transformation temperatures were measured by differential scanning calorimetry. The intermetallic compounds, Cu₂₄Zr₁₃, Cu₂Zr and Cu₅Zr₈, were demonstrated to be not the stable phases. Based on the literature information and present experimental data, the Cu-Zr system was critically evaluated by means of CALculation of PHAse Diagram approach. A set of self-consistent thermodynamic parameters was obtained, and the calculated phase diagram and thermodynamic properties are in a satisfactory agreement with the experimental data.     

High-Throughput Determination of Interdiffusion Coefficients for Co-Cr-Fe-Mn-Ni High-Entropy Alloys

In this report, a combination of the diffusion multiple technique and the recently developed pragmatic numerical inverse method was employed for a high-throughput determination of interdiffusivity matrices in Co-Cr-FeMn-Ni high-entropy alloys (HEAs). Firstly, one face-centered cubic (fcc) quinary Co-Cr-Fe-Mn-Ni diffusion multiple at 1373 K was carefully prepared by means of the hot-pressing technique. Based on the composition profiles measured by the field emission electron probe micro analysis (FE-EPMA), the composition-dependent interdiffusivity matrices in quinary Co-Cr-Fe-Mn-Ni system at 1373 K were then efficiently determined using the pragmatic numerical inverse method. The determined interdiffusivities show good agreement with the limited results available in the literature. Moreover, the further comparison with the interdiffusivities in the lower-order systems indicates the sluggish diffusion effect in Co-Cr-Fe-Mn-Ni HEAs, which is however not observed in tracer diffusivities. In order for the convenience in further analysis, a generalized transformation relation among interdiffusivities with different dependent components in multicomponent systems was finally derived.     

Weldability and microstructural variations in weldments of Ti-5Ta-1.8Nb alloy

The successful replacement of the present generation of corrosion-resistant materials (nitric acid-grade stainless steel and Ti) by Ti-5Ta-1.8Nb, which has better corrosion resistance, depends on its weldability characteristics. This article presents the results of a study on the fabrication, qualification, and microstructural characterization of the welds. Welding was carried out using the direct current electrode negative (DCEN) polarity tungsten inert gas (TIG) (manual) welding method with high-purity Ar shielding. Testing was carried out as per the ASME standard (section IX, welding and brazing). Qualification tests found that the weldment met the required properties. The weldment showed heterogeneous microstructures, which are rationalized based on differences in phase transformation mechanisms that are dictated by the thermal cycles experienced by various microscopic regions. The results, described in this article, confirm that the weldability of the developmental Ti-Ta-Nb alloy is excellent. A preliminary evaluation of the corrosion behavior of the welds showed rates comparable to that of the base metal, establishing that this alloy could be considered as an alternative material for use in highly corrosive environments.     

Template-free hydrothermal synthesis of single-crystalline SnO<Subscript>2</Subscript> nanocauliflowers and their optical properties

Large-scale single-crystalline SnO₂ nanocauliflowers were successfully synthesized using a hydrothermal growth method without any template. The samples were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and selected area electron diffraction (SAED). FE-SEM images show that the as-grown SnO₂ nanocauliflowers are constructed of tetragonal prisms with a width of 500–600 nm. XRD, EDS, and SAED results indicate that the as-grown SnO₂ nanocauliflowers are single crystalline with the tetragonal rutile crystalline structure. The growth mechanism of SnO₂ nanocauliflowers is also preliminarily discussed on the basis of different Sn(OH)₆²⁻ concentrations, and it is found that Sn(OH)₆²⁻ concentration plays an important role in determining the shape of the prepared SnO₂. Room temperature photoluminescence was further carried out on SnO₂ nanocauliflowers to investigate their optical properties. An intense blue luminescence centered at a wavelength of 424 nm is observed in the as-grown SnO₂ nanocauliflowers.