A quantum amplifier model for predicting temporal variations in theoutput power from a semiconductor laser on a picosecond time scale

A new model for simulating temporal fluctuations in the power emitted by a semiconductor laser is described. Light in the cavity is assumed to circulate in the form of traveling photon packets, in which the photon number fluctuates due to the processes of spontaneous emission, stimulated emission, absorption, scattering, and reflection. The dipole dephasing time T plays a critical role in modeling the interaction of the photon packets and gain medium. The Monte Carlo method is used to simulate the temporal behavior of a continuously pumped Fabry-Perot laser. The laser output power is found to exhibit periodic fluctuations at the cavity transit time frequency (longitudinal mode beat frequency). The amplitude of these fluctuations, as well as the relaxation oscillation, which occurs at a much lower frequency, is strongly influenced by the magnitude of T. The results of these simulations are related to the temporal behavior expected from a conventional FP laser     

A 533-MHz BiCMOS superscalar RISC microprocessor

This 533-MHz BiCMOS very large scale integration (VLSI) implementation of the PowerPC architecture contains three pipelines and a large on-chip secondary cache to achieve a peak performance of 1600 MIPS. The 15 mm×10 mm die contains 2.7 M transistors (2M CMOS and 0.7 M bipolar) and dissipates less than 85 W. The die is fabricated in a six-level metal, 0.5-μm BiCMOS process and requires 3.6 and 2.1 V power supplies     

AlGaAs vertical-cavity surface-emitting laser responses to 4.5-MeV proton irradiation

We have irradiated single- and multimode AlGaAs vertical-cavity surface-emitting laser (VCSEL) arrays operating at a nominal wavelength of 780 nm with 4.5-MeV protons and doses ranging from 10 to 30 Mrad in the active region. We observed a peak power reduction of about 2% per Mrad in the 14-/spl mu/m aperture, multimode VCSELs. Single-mode VCSELs having an aperture of 6 /spl mu/m exhibited a smaller peak power reduction of 0.4%-1% per Mrad. A slight shift in the current threshold was observed only for the multimode VCSELs at dose levels above 10 Mrad. First results indicate a reduced VCSEL peak laser power output that is dominated by a temperature shift caused by the radiation induced increase in resistive heating. In contrast, the power reduction in edge-emitting lasers is dominated by the enhanced radiation induced nonradiative recombination rate. The VCSEL irradiation was performed with a focused ion micro beam that was rastered over the device surface, ensuring a very uniform exposure of a single device in the array.     

The use of atmospheric pressure MOVPE for the growth of high performance uncooled 1300 nm DFB lasers

Manufacture of high performance uncooled 1300 nm distributed feed-back (DFB) lasers operating single mode over the −40 to +85°C range requires control of the wavelength variation across a 2″ wafer to less than 10nm and preservation of grating definition during processing and regrowth. We have used atmospheric pressure metalorganic vapor phase epitaxy, without substrate rotation to achieve the necessary uniformity. Material was assessed using photoluminescence, x-ray diffraction, transmission electron microscopy, electrochemical current/voltage profiling, and secondary ion mass spectroscopy. The devices are based on a strained quantum well structure with an n-type grating layer to provide gain coupling. The best result gave a wavelength spread across 32×32 mm center square of a 2″ InP wafer of 3 nm. Buried heterostructure DFBs manufactured with high yield in this way operate from −40 to +85°C, with thresholds at 85°C as low as 18 mA.     

Multilevel differential polarization shift keying

We analyze the performance of coherent optical communication systems which employ polarization shift keying (PolSK) modulation, introducing for the first time the requirements for multilevel, differential PolSK. For M-ary signal constellations with M>2, the three-dimensional (3-D) nature of the signal constellations within Stokes space requires the use of double-differential modulation and detection (M-DDPolSK). Coding constraints on the signals place an additional restriction on such systems. We present detailed analysis and simulations for a 6-DDPolSK modulation scheme in which the signal points are located at the vertices of an octahedron in Stokes space     

Generating, capturing and processing supply current signatures from analogue macros in mixed-signal ASICs

Transient Response Testing is a powerful test technique for analogue macros in mixed-signal electronic systems which with some enhancement can be particularly useful for testing deeply buried circuit structures. Supply current testing is finding widespread application in the digital domain and its use in the analogue domain may lead to integrated test methodologies for mixed-signal systems. This paper shows that by utilizing both these techniques, and a low-cost test shell, deeply buried analogue macros can be partitioned, tested using Transient Response Testing and the resulting response accurately captured from the total device supply current. It also contains an analysis of the noise on the supply current, due to digital circuit activity during testing, and demonstrates a test response analysis technique which is insensitive to it.     

Finite field inversion over the dual basis

In this transaction brief we consider the design of dual basis inversion circuits for GF(2^m). Two architectures are presented-one bit-serial and one bit-parallel-both of which are based on Fermat's theorem. Finite field inverters based on Fermat's theorem have previously been presented which operate over the normal basis and the polynomial basis. However there are two advantages to be gained by forcing inversion circuits to operate over the dual basis. First, these inversion circuits can be utilized in circuits using hardware efficient dual basis multipliers without any extra basis converters. And second, the inversion circuits themselves can take advantage of dual basis multipliers, thus reducing their own hardware levels. As both these approaches require squaring in a finite field to take place, a theorem is presented which allows circuits to be easily designed to carry out squaring over the dual basis     

Rapidly tunable optical add-drop multiplexer utilising relaxed beam splitters

A polarisation-independent four-port electro-optic tunable filter in the 1530 nm wavelength regime utilising non-polarising relaxed beam splitters and strain-induced polarisation converters on LiNbO₃ with 16 nm tuning range and 46 ns tuning speed is reported.